JLRTB02079NAS2

JLRTB02079NAS2
TECHNICAL BULLETIN
18 MAR 2024
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a specific vehicle.
SECTION:
501-17
SUBJECT/CONCERN:
Creaking Noise From Glass Roof Panel
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
A creaking noise can be heard coming from the glass roof panel of the vehicle when driving
at low speeds and/or over rough ground.
This technical bulletin has been updated due to changes to the AFFECTED VEHICLE
RANGE and SERVICE INSTRUCTION.
CAUSE:
Interaction between the glass roof panel flip seal and vehicle body.
ACTION:
Follow the instructions below.
PARTS:
NOTE:
An allowance equivalent to £25.00 Sterling for each repair has been allocated to
locally source Carbaflo KSP 105 lubricant and a suitable spreader tool (or
equivalent).
PART NUMBER
ZZZ001
DESCRIPTION
Carbaflo KSP 105 lubricant
QUANTITY
As required
WARRANTY:
NOTE:
* When submitting your Warranty claim within the Warranty portal, use the
Condition Code list shown to select the Condition Code which best describes the
vehicle defect.
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
DESCRIPTION
SRO
TIME (HOURS)
CONDITION CODE
CAUSAL PART
JLRTB - Clean and lubricate seal
99.01.51
0.1
*
LR145003
NOTE:
Normal Warranty procedures apply.
SERVICE INSTRUCTION:
All vehicles
1.
Apply a suitable solvent cleaner to a clean cloth.
2.
NOTE:
The illustration shows an example a suitable spreader tool to be used during
this technical bulletin.

Wrap the cloth around a suitable spreader tool that can be inserted between the
glass roof panel flip seal and the vehicle body.
Range Rover Evoque vehicles only
3.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Clean the seals shown highlighted in the illustration. Make sure the seals are
dry and free from contamination.
Reapply the suitable solvent cleaner as required.
4.
5.
Apply Carbaflo KSP 105 lubricant to a new clean cloth.
Wrap the cloth around a suitable tool that can be inserted between the glass roof
panel flip seal and the vehicle body.
6.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Lubricate the seals shown highlighted in the illustration.
Reapply the Carbaflo KSP 105 lubricant as required.
Discovery vehicles only
7.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Clean the seals shown highlighted in the illustration. Make sure the seals are
dry and free from contamination.
Reapply the suitable solvent cleaner as required.
8.
9.
Apply Carbaflo KSP 105 lubricant to a new clean cloth.
Wrap the cloth around a suitable tool that can be inserted between the glass roof
panel flip seal and the vehicle body.
10.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Lubricate the seals shown highlighted in the illustration.
Reapply the Carbaflo KSP 105 lubricant as required.
E-PACE vehicles only
11.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Clean the seals shown highlighted in the illustration. Make sure the seals are
dry and free from contamination.
Reapply the suitable solvent cleaner as required.
12.
13.
Apply Carbaflo KSP 105 lubricant to a new clean cloth.
Wrap the cloth around a suitable tool that can be inserted between the glass roof
panel flip seal and the vehicle body.
14.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Lubricate the seals shown highlighted in the illustration.
Reapply the Carbaflo KSP 105 lubricant as required.
Range Rover vehicles only
15.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Clean the seals shown highlighted in the illustration. Make sure the seals are
dry and free from contamination.
Reapply the suitable solvent cleaner as required.
16.
17.
Apply Carbaflo KSP 105 lubricant to a new clean cloth.
Wrap the cloth around a suitable tool that can be inserted between the glass roof
panel flip seal and the vehicle body.
18.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Lubricate the seals shown highlighted in the illustration.
Reapply the Carbaflo KSP 105 lubricant as required.
Range Rover Sport vehicles only
19.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Clean the seals shown highlighted in the illustration. Make sure the seals are
dry and free from contamination.
Reapply the suitable solvent cleaner as required.
20.
21.
Apply Carbaflo KSP 105 lubricant to a new clean cloth.
Wrap the cloth around a suitable tool that can be inserted between the glass roof
panel flip seal and the vehicle body.
22.

Insert the tool and cloth between the glass roof panel flip seal and the vehicle body.
Lubricate the seals shown highlighted in the illustration.
Reapply the Carbaflo KSP 105 lubricant as required.
anBhdHRlcnM7MjAyNC0wMy0xOVQxMjozMDo1MC44MDBaOzE2NS4yMjUuMzguMjU0Ow==