P0200

Injector Circuit Malfunction

DTC P0200, sometimes indicated as P020000 is an OBD diagnostic trouble code indicating a generic fault with the vehicle powertrain (i.e. engine and gearbox). This code identifies an error with the air/fuel mixture causing injector circuit malfunction.

There are a few things that can cause this code to set, but the most common is a bad injector. Other causes can include a bad wiring connection, a bad fuel pressure regulator, or a bad fuel pump. If the code is set because of a bad injector, it will need to be replaced.

P0200: Injector Circuit Malfunction
P0200: Injector Circuit/Open
P0200: Injector Circuit Open
P0200: Injector – circuit malfunction
P0200 00: Damage in the injector circuit
P0200 00: Injector - circuit malfunction

DTC Trouble Code Search

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

PIP-4673 - ENGINE AND ENGINE COOLING:ENGINE
CHEVROLET: Chevrolet: ses light and/or engine misfire due to dtcs P0200-P0208 and/or dtcs P0300-P0308. *pe updated 6/6/11. *pe

Consumer Complaints for this DTC

2019 KIA SORENTO with 29000.0 miles

My sorrento started to ride very rough and felt like engine was knocking and mthe vehicle would start to shake. I pulled over turn vehicle off checked all my levels everything was ok except low washer fluid. Proceeded home no problem. Next day after working and running errands same thing happened this time engine light came on. Brought it to auto zone and the error code given is P0200. And i notice that my vehicle is burning a large amount of fuel. The next day the light was off no problem but on yesterday 10/14/19 it has started again.
ENGINE, FUEL/PROPULSION SYSTEM