Recalls

Recall R/2008/192

  • UK Recall: Front suspension arm could fail.
    >It has been identified that during manufacture an incorrect tightening torque may have been applied to the front suspension ball joint retaining nuts. this can result in the ball joint becoming loose in it's taper and in extreme circumstances an increase in wear may cause the suspension arm to break.

    Corrective Action:
    Recalled vehicles will have the subject ball joint retaining nuts checked for correct torque. should this not be the case both suspension levers and the hub carrier will be changed.

    1577 Affected Units 🚙🚙🚙🚙
    From VIN ZAMCD39B000010898 to ZAMFK39B000040552

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.