Maserati Quattroporte 2004

• Recall R/2008/192 [UK]: Front suspension arm could fail.
  It has been identified that during manufacture an incorrect tightening torque may have been applied to the front suspension ball joint retaining nuts. This can result in the ball joint becoming loose in it's taper and in extreme circumstances an increase in wear may cause the suspension arm to break.
  recalled vehicles will have the subject ball joint retaining nuts checked for correct torque. Should this not be the case both suspension levers and the hub carrier will be changed.

  Show Content

• Recall R/2005/028 [UK]: Short circuit may occur on the electrical door opening
  Due to a possible manufacturing defect there is a risk that the internal wiring harness of the door handle may short circuit and trigger the electrical door opening switch of the door. This may result in the door opening without intervention although onboard software of the central locking does not allow this situation to occur over 6mph.
  recall the vehicles that are likely to be affected and replace the outside door handles.

  Show Content

• Recall R/2013/061 [UK]: Loss of vehicle control
  The protection on the treaded portion of the tie-rod may not be to the manufacturer's specification. If the owner continues to use the vehicle in this condition it can result in damage occurring on the threaded portion of the tie-rod and may cause loss of control of the vehicle.
  recall all the affected vehicles and replace both tie-rods with quality assured items.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.