Recalls

Recall R/2014/012

  • UK Recall: Front suspension arm may fail
    >The front suspension lower suspension arms may corrode due to insufficient coating of the steel on the inner surfaces. excessive corrosion could cause weakening of the arms (thinning of metal). gradual weakening of the lower suspension arms. customers are unlikely to notice any symptoms but may notice juddering from suspension area. ultimately the arm could fracture.

    Corrective Action:
    The front suspension lower arms will be checked for corrosion and the thickness of the steel measured. if the thickness of the steel is sufficient the cavities will be filled with cavity wax to prevent corrosion. if the thickness of the steel is below the minimum the arms will be replaced.

    9964 Affected Units 🚙🚙🚙🚙🚙
    From VIN KNEMB754266016786 to KNAMH816MB6448611

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.