1998 AUDI S8Audi S8 1998

Vehicle Details: Service Bulletins

Below you will find all available information on the 1998 AUDI S8, manufacturered by Audi Ag.

ManufacturerKnown WMI(s)Fuel Type
AUDIWA1 WUA
AUDI VIN Decoder

Use the box here to look up VINs from AUDI as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 1998 AUDI S8 produced?
     - The 1998 AUDI S8 is produced in Ingolstadt, Germany.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 44134620103345 - WHEELS: Tightening wheel bolts
  • 44145520103346 - WHEELS: Tightening wheel bolts
  • Update91i8 - UNKNOWN OR OTHER: Google maps street view (nvlw))
  • AUD4927ENG - UNKNOWN OR OTHER: Due to new minnesota state regulations regarding biofuels, biodiesel blends of b5 or less may not be available in the state of minnesota.
  • Edition42 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Audi elsa newsletter
  • Edition53 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Audi elsa newsletter
  • Edition92 - ENGINE AND ENGINE COOLING:COOLING SYSTEM: Idenifying and mixing factory fill engine coolants
  • 1335201004313 - ENGINE AND ENGINE COOLING: Engine oils that meet audi oil quality standards.
  • 134120253033 - ENGINE AND ENGINE COOLING: Discontinuation and mixing of audi-approved engine coolants.
  • 133520253032 - ENGINE AND ENGINE COOLING: Discontinuation and mixing of audi-approved engine coolants.
  • 131020182884 - BACK OVER PREVENTION: If the vehicle?S engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds,
  • SM 44-2017 EN - EQUIPMENT: This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
  • A1915612025303-5 - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 19 number 14-50 dated june 20, 2014. Discontinuation and mixing of audi-approved engine coolants. G11, g12, and g12+ coolants have been replaced by an improved version. G12++ coolant (for service
  • A171782 2010043- - ENGINE (PWS): This informational bulletin contains all the the audi oil quality standards that should be used when doing an oil change.
  • ATE-17-05 - EQUIPMENT: Due to increasing requests for high voltage personal protective equipment (hve ppe) for dealer technicians working with high voltage vehicles (hybrid, plugin hybrid, electric vehicle), the volkswagen tools and equipment team has identified
  • A441662 2010334- - WHEELS: This information tsb provides information regarding the correct way to torque adjust a wheel bolt.
  • A941791 2012749- - EXTERIOR LIGHTING: This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light l
  • Accessories Oper - EQUIPMENT: This is an advance notice for audi of america employees. This notice contains information for the accessories operations technical bulletin.
  • A441455 2010334- - WHEELS: Supersedes technical service bulletin group 44 number 13-46 dated december 9, 2013. Wheel bolt requires torque adjustment.
  • A001348 2002047- - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Supersedes technical service bulletin group 00 number 11-19 dated april 8, 2011. This tsb contains information on technician preparation when calling the audi technical assistance center
  • A191335 2025303- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 19 number 11-19 dated february 10, 2011. Discontinuation and mixing of audi-approved engine coolants. G11, g12, and g12+ coolants have been replaced by an improved version. G12++ coolant (for serv
  • A191562 2025303- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 19 number 15-61 dated july 7, 2015. Discontinuation and mixing of audi-approved engine coolants. G11, g12, and g12+ coolants have been replaced by an improved version. G12++ coolant (for service a
  • A191341 2025303- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 19 number 13-35 dated march 25, 2013. Discontinuation and mixing of audi-approved engine coolants. G11, g12, and g12+ coolants have been replaced by an improved version. G12++ coolant (for service
  • A941292 2012749- - EXTERIOR LIGHTING: Supersedes technical service bulletin group 94 number 11-52 dated october 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake
  • A001467 2002047- - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Supersedes technical service bulletin group 00 number 14-61 dated may 1, 2014. Technician preparation when calling the audi technical assistance center (tac).
  • A191450 2025303- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 19 number 13-41 dated june 20, 2013. Discontinuation and mixing of audi-approved engine coolants. G11, g12, and g12+ coolants have been replaced by an improved version. G12++ coolant (for service
  • A441346 2010334- - WHEELS: Supersedes technical service bulletin group 44 number 12-32 dated august 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by audi of america, inc., and should no
  • A901341 2010353- - EQUIPMENT ADAPTIVE/MOBILITY: Supersedes technical service bulletin group 90 number 10-14 dated august 10, 2010. Cigarette lighter element will not lock into the lighter socket -u1- to begin the heating process, or the lighter element will not automatically release once
  • A101310 2018288- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 10 number 10-02 dated september 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem
  • A011507 2028344- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 01 number 13-69 dated february 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiri
  • A941565 2012749- - EXTERIOR LIGHTING:HEADLIGHTS: Supersedes technical service bulletin group 94 number 12-92 dated october 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake l
  • A171557 2010043- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 17 number 13-35 dated january 9, 2013. This bulletin lists engine oils that meet audi oil quality standards (vw 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
  • A101511 2018288- - ENGINE AND ENGINE COOLING: Supersedes technical service bulletin group 10 number 13-10 dated september 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is pos

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.