Autocar Xpert 2014

• Recall 237527 [USA]: The unexpected release of the parking brake may allow the vehicle to rollaway, increasing the risk of a crash.
  Autocar, llc (autocar) is recalling certain 2012-2016 xpert, 2010-2020 xspotter, 2008-2020 xpeditor, 2008-2010 wxll and wx vehicles. A worn parking brake control valve can leak air into the vent line, creating excessive back pressure and causing the parking brake to release unexpectedly.
  dealers will remove the vent line and fitting from the valve, free of charge. Owner notification letters were mailed march 23, 2023. Owners may contact autocar customer service at 1-888-218-3611. Autocar's number for this recall is acx-2023 actt-2301.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  Show Content

• Recall 112802 [USA]: If engine oil comes into contact with a hot surface, there could be is an increased risk of a fire.
  Autocar industries, llc (autocar) is recalling certain model year 2014-2016 xpert and xspotter vehicles manufactured september 24, 2013, to april 22, 2015, and equipped with certain cummins westport isl g engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
  cummins will notify owners on behalf of autocar, and cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ecm) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on june 16, 2015. Owners may contact autocar customer service at 1-765-589-5499 or cummins inc. At 1-800-343-7357. Autocar's number for this recall is mdtt-01.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 105728 [USA]: The unexpected bounce may cause the operator to lose control of the vehicle, increasing the risk of a crash.
  Autocar industries, llc (autocar) is recalling certain model year 2012-2015 xpert trucks manufactured november 30, 2011, to november 5, 2014 and having a 164-inch wheelbase and a sweeper body which is mounted with a gap between the cab and the body (where optional equipment could be installed). When being driven at speeds above 25mph, the affected vehicles may have an unexpected bounce.
  the remedy for this recall is still under development. An interim notice was mailed to owners in august 2014. The recall began on november 20, 2014. Owners may contact autocar customer service at 1-765-489-5499. Autocar's number for this recall is m-1408.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 102519 [USA]: Loose bolts may allow the seat to move in the event of a crash, increasing the risk of injury to the seat occupant.
  Autocar industries, llc (autocar) is recalling certain model year 2012-2014 xpert vehicles manufactured july 11, 2011, through march 5, 2014. During manufacturing, the floor mat may have been captured between the seat brackets and the cab sheet metal at all four connection points. This could cause the torque on the bolts to relax to below the required torque, allowing them to loosen. As such, these vehicles do not conform to federal motor vehicle safety standard (fmvss) number 207, "seating systems."
  autocar will notify owners, and dealers will correct the seat mounting free of charge. The recall is expected to began in june 2014. Owners may contact autocar's customer service at 1-765-489-5499. Autocar's number for this recall is m-1405.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 102522 [USA]: A loose steering column may make it difficult to steer the vehicle, increasing the risk of a crash.
  Autocar industries, llc (autocar) is recalling certain model year 2012-2014 xpert vehicles manufactured july 11, 2011, through march 5, 2014. The bolts that secure the steering column mounting bracket could be below the required torque and possibly cause the steering column to come loose.
  autocar will notify owners, and dealers will correct the steering column mounting, free of charge. The recall began in june 2014. Owners may contact autocar's customer service at 1-765-489-5499. Autocar's number for this recall is m-1407.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 103525 [USA]: Low bolt torque may result in a loss of brake line air pressure, increasing the risk of a crash.
  Autocar industries, llc (autocar) is recalling certain model year 2012-2014 xpert vehicles manufactured july 11, 2011, through march 5, 2014. The bolts securing the brake valve to the cab may be below the required torque which could cause a failure in the connection of the airlines and the brake valve. Thus, the vehicles do not conform to federal motor vehicle safety standard (fmvss) number 121, "air brake systems."
  autocar will notify owners, and dealers will correct the brake valve mounting, free of charge. The recall began in june 2014. Owners may contact autocar's customer service at 1-765-489-5499. Autocar's number for this recall is m-1406.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 102246 [USA]: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.
  Autocar industries, llc, (autocar) is recalling certain model year 2014 xpert trucks manufactured november 7, 2013, through january 13, 2014, and equipped with certain cummins westport model isl g or isx12 g engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.
  cummins inc. And cummins wesport inc. Will notify owners, and authorized cummins service facilities will upload a new ecm calibration, free of charge. The recall began on april 12, 2014. Owners may contact autocar at 1-765-489-5499 or cummins inc. At 1-800-343-7357. Autocar's number for this recall is m-1404.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 102387 [USA]: If the seat belt does not properly restrain the seat occupant, there is an increased risk of injury in the event of a crash.
  Autocar industries, llc (autocar) is recalling certain model year 2012-2014 xpert vehicles manufactured july 11, 2011, through march 5, 2014. The bolts used to anchor the seat belts may be insufficiently tight to withstand the forces experienced in certain crashes. As such, these vehicles do not conform to federal motor vehicles safety standard (fmvss) number 209, "seat belt assemblies."
  autocar will notify owners, and dealers will tighten the seat belt mounting bolts, free of charge. The recall is began in june 2014. Owners may contact autocar at 1-765-489-5499. Autocar's number for this recall is m-1401.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 2015042 [Canada]: Structure
  Certain xpert chassis vehicles may experience a bounce condition while traveling 40km\h or faster, related to chassis flexibility and body configuration. The bounce condition may be surprising or unnerving to the operator. This could result in a loss of driver control of the vehicle, increasing the risk of a crash causing injury and/or damage to property. Correction: the vehicle will be re-calibrated with an updated calibration program. This updated calibration will correct the issue. Note: this is an expansion of recall 2014394.

  Show Content

• Recall 2014394 [Canada]: Structure
  Certain 164-inch wheelbase xpert chassis vehicles, configured as street sweepers with the sweeper body spaced away from the vehicle cab, may experience a bounce condition while traveling 40km\h or faster, related to chassis flexibility and body configuration. This could result in a loss of driver control of the vehicle, increasing the risk of a crash causing injury and/or damage to property. Correction: the vehicle will be re-calibrated with an updated calibration program. This updated calibration will correct the issue.

  Show Content

• Recall 2014129 [Canada]: Seats and restraints
  On certain vehicles, fasteners in the cab may have been insufficiently tightened at time of assembly and could loosen over time, affecting compliance to requirements of several canada motor vehicle safety standards (cmvss), including cmvss 209 - seat belt assemblies due to seatbelt mounting fasteners, cmvss 207 - anchorage of seats due to seat fasteners and cmvss 121 - air brake systems due to valve mounting fasteners. Also various other fasteners for the accelerator pedal, steering column, exterior grab handles, and steps to the cab structure may loosen. These issues could affect braking system function, occupant protection in a crash, and create various other risks to safety, increasing the risk of injury and/or damage to property. Correction: dealers will inspect and replace the affected fasteners.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Vehicle roll away investigation # PE20003

  On april 1, 2020, following information received from the office of defects investigation (odi) network of fleet contacts, odi opened pe20-003 to investigate reports of vehicle roll away in certain model year (my) 2008-2020 autocar and mack refuse trucks equipped with certain bendix pp-1 push-pull pneumatic park brake control valves with a pipe-away exhaust configuration. Prior to odi’s investigation,[kk(1]  bendix commercial vehicle systems llc (bendix), the subject component manufacturer, published two related technical service bulletins (tsbs): bendix push-pull type control valves service data sd-03-3611 rev. 007 (2019-03) and bendix pp-1 & pp-8 park control valve wear and replacement notice technical bulletin tch-003-056 (2019-11-20). Odi sent information request (ir) letters to motor vehicle manufacturers autocar llc (autocar) and volvo trucks north america/mack trucks, inc. (volvo/mack) and motor vehicle equipment manufacturer bendix. Ir response data from all three manufacturers was analyzed and cross-referenced to gain further understanding. To date, odi is aware of 5 vehicle roll-away incidents related to the alleged defect condition in the subject vehicles equipped with the subject components, resulting in 4 crashes and 1 injury. On december 9, 2021, volvo/mack notified the agency of a safety recall (21v953) to address a safety defect in certain my 2008-2019 terrapro (mru) and my 2019-2022 terrapro (te) trucks originally equipped with the subject components. [kk(2] on january 1, 2023, autocar notified the agency of a safety recall (23v023) to address a safety defect in certain my 2008-2020 acx (xpeditor), my 2012-2020 acmd (xpert), my 2010-2020 actt (xspotter), my 2008-2010 wx and my 2008-2010 wxll trucks. Volvo/mack and autocars recall remedies involve removing the vent line fitting threaded into the exhaust port of the subject pp-1 valve. [vd(3] both autocar and mack have stopped equipping new refuse trucks with park control valves using the exhaust pipe-away configuration. After discussions between odi and bendix concerning ways to prevent new pp-1 valves from being sold and installed with a potential for the exhaust to become restricted, bendix will take the following actions: 1) issue a letter to all original equipment (oe) customers with important safety information warning them about the safety risk of attaching plumbing to the exhaust port when the subject component is used as a park control valve; and 2) affix a warning label on all aftermarket parts warning not to install pipe-away exhaust port plumbing. In view of the recalls being conducted by volvo/mack and autocar, and the actions taken by bendix, odi has closed this preliminary evaluation. The closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist in equipment or other model or my vehicles that have not been recalled. The agency reserves the right to take further action if warranted.
  

  Show Content