Bmw R1250-gs 2020
Vehicle Details: Recalls, Consumer Complaints, Decoded VIN Details, Service Bulletins
Use the box here to look up VINs from BMW as well as other manufacturers
Sub-models: - R 1250 Gs -
-
Where is the 2020 BMW R1250-GS produced?
- The 2020 BMW R1250-GS is produced in Berlin Bavaria, Germany.
-
Are there recalls for the 2020 BMW R1250-GS?
- There are 12 recall(s) for the 2020 BMW R1250-GS, additional information is below.
-
What is the GVWR of a 2020 BMW R1250-GS?
- The 2020 BMW R1250-GS has a GVWR of Class 1A: 3,000 lb or less (1,360 kg or less) lbs.
-
How much horsepower does the 2020 BMW R1250-GS have?
- The 2020 BMW R1250-GS has 136 horsepower.
Recall 240039 [USA]: A damaged gearbox input shaft or a blocked rear wheel can increase the risk of a crash.
Recall 142654 [USA]: Overtime, a leaking front brake caliper can reduce the amount of brake fluid in the reservoir. low volume could affect brake performance, increasing the risk of crash.
Recall 150474 [USA]: Improper brake system maintenance could affect braking performance and increase the risk of a crash.
Recall 159450 [USA]: A loose connection between the final drive and swing arm will reduce stability and control, increasing the risk of a crash.
Recall 147190 [USA]: A flashing brake light can cause confusion to other drivers on the road, increasing the risk of a crash.
Recall RM/2020/006 [UK]: The pivot pin material does not have the correct quality and the yield strength is not sufficient
Recall RM/2020/040 [UK]: The bonding of the type label and/or noise sign is not process-reliable
Recall 2020570 [Canada]: Brakes
Recall 2020387 [Canada]: Label
Recall 2020377 [Canada]: Brakes
Recall 2020110 [Canada]: Suspension
Recall 2020098 [Canada]: Lights and instruments
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- B611305 - ELECTRICAL SYSTEM: The electrical system of bmw vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on ho
- MC160323 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Vehicle goes into emergency operation mode and a warning light illuminates on the instrument cluster.
- SIB630122 - EXTERIOR LIGHTING:HEADLIGHTS: Led headlights were temporarily unavailable from the factory and some r 1250 gs and r 1250 gsadventure units were built with the halogen headlight in order to ensure safe use.
- SIB330222 - POWER TRAIN:DRIVELINE:DRIVESHAFT: Multiple factors may cause the driveshaft to become damaged; among them are corrosion in certain parts ofthe driveshaft, and wear and tear exacerbated by certain climatic conditions.
- SIB460123 - EQUIPMENT: Frame and mounting parts
- MC000222 - BRAKES (PWS): Bmw motorrad is aware of a number of cases in which the screw connections of the paralever link and/or the rear brake caliper have loosened in customer vehicles while driving.
- SIB330222 - POWER TRAIN: Multiple factors may cause the driveshaft to become damaged; among them are corrosion in certain parts of the driveshaft, and wear and tear exacerbated by certain climatic conditions.
- SIB610321 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Battery empty despite charger.
- MC610321 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: The motorcycle will not start. The vehicle battery is empty even though the battery charger was permanently connected to the 12v power socket.
- MC460521 - STRUCTURE: Stress corrosion cracks may occur on the studs of certain milled footrests from the bmw motorrad special accessories catalog for the gs models.
- MC610821 - ELECTRICAL SYSTEM: When diagnosing fault codes (0x3a13d7, 0x3a13d9), technicians erroneously condemn the electronic throttle grip, which analyses show is rarely the culprit.
- MC340121 - SERVICE BRAKES, HYDRAULIC: During operation of the rear wheel foot brake lever, the rider feels a soft pressure point or perceptibly longer lever travel
- MC000621 - ENGINE (PWS): Bmw motorrad usa is pleased to announce the launch of the bmw motorrad ultimate care program, effective june 23 , 2021. Three different plans will be offered for consumer bikes, as well as two authority-specific plans. Model-year 2020 and n
138 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Class | Motorcycle - Dual Sport / Adventure / Supermoto / On/Off-road |
DisplacementCC | 1254 |
DisplacementCI | 76.523775094 |
DisplacementL | 1.254000 |
Engine Cylinders | 2 |
EngineHP | 136 |
EngineKW | 101.4152 |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
Fuel Type Primary | Gasoline |
GVWR | Class 1A: 3,000 lb or less (1,360 kg or less) |
Make | BMW |
MakeID | 452 |
Manufacturer | BMW AG MOTORCYCLES |
Manufacturer Id | 972 |
Model | R 1250 GS |
ModelID | 26625 |
Model Year | 2020 |
NCSA Body Type | Two Wheel Motorcycle (excluding motor scooters) |
NCSA Make | BMW |
NCSA Model | 750cc and over |
Plant City | BERLIN |
Plant Country | GERMANY |
Series | K50 |
VIN | WB10J9307LZJ18217 |
Vehicle Type | MOTORCYCLE |
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
No | No | N | None | None | 20210216 |
Excessive wear on rear braking components (pads). After 3000 miles, pads only had 3mm of material. The is a high degree of discoloration on the brake components. Issue is not attributed to user error (i.E., riding the brakes). Bmw service has refused to address, stating brake components are not covered under warranty. I'm reporting this issue to the national highway traffic safety administration as part of 'due diligence' to collect safety related information with the 2020 bmw r1250gsa brake system. There might be a systemic issue with the calipers and possibly the abs pressure modulator. Non-user attributed excessive wear of the brake pads is indicative of some sort of mechanical issue that could impact the overall safety of the vehicle, such as loss of braking ability, total failure of the braking system with the potentially of wheel lock up should the system apply full braking to the rear wheel.
No | No | N | None | None | 20210215 |
Excessive wear on rear braking components (pads). After 3000 miles, pads only had 3mm of material. The is a high degree of discoloration on the brake components. Issue is not attributed to user error (i.E., riding the brakes). Bmw service has refused to address, stating brake components are not covered under warranty. I'm reporting this issue to the national highway traffic safety administration as part of 'due diligence' to collect safety related information with the 2020 bmw r1250gsa brake system. There might be a systemic issue with the calipers and possibly the abs pressure modulator. Non-user attributed excessive wear of the brake pads is indicative of some sort of mechanical issue that could impact the overall safety of the vehicle, such as loss of braking ability, total failure of the braking system with the potentially of wheel lock up should the system apply full braking to the rear wheel.
No | No | N | None | None | 20200328 |
Front brake calipers are leaking brake fluid. Noticeable drops on wheel rim when parked.
No | No | N | None | None | 20200327 |
Front brake calipers are leaking brake fluid. Noticeable drops on wheel rim when parked.
No | No | N | None | None | 20191210 |
Both front brake calipers are leaking brake fluid. Observed when stationary, dripping from the bottom. Also sweats of brake fluid observed at the seam (it is a two piece brake caliper, manufactured by hayes). Dealer cannot resolve the issue (can't get replacement parts) and bmw customer service offered no other remedy. Essentially i cannot ride a new bike for 3 months now without being afraid for my safety.
No | No | N | None | None | 20191209 |
Both front brake calipers are leaking brake fluid. Observed when stationary, dripping from the bottom. Also sweats of brake fluid observed at the seam (it is a two piece brake caliper, manufactured by hayes). Dealer cannot resolve the issue (can't get replacement parts) and bmw customer service offered no other remedy. Essentially i cannot ride a new bike for 3 months now without being afraid for my safety.
No | No | N | None | None | 20191127 |
Both front calipers are leaking fluid. I took it to the dealer for verification and repair on nov 27 2019. I have been inquiring with them every two weeks since as to when they may be replaced with not even and estimated date. Bmw motorrad customer service has advised there is nothing they can do to escalate the case to any other department to get this issue resolved and that it must be done through the dealer. Fluid has also leaked on the front wheel and tire. At this point, the bike cannot be trusted to stop.
No | No | N | None | None | 20191126 |
Both front calipers are leaking fluid. I took it to the dealer for verification and repair on nov 27 2019. I have been inquiring with them every two weeks since as to when they may be replaced with not even and estimated date. Bmw motorrad customer service has advised there is nothing they can do to escalate the case to any other department to get this issue resolved and that it must be done through the dealer. Fluid has also leaked on the front wheel and tire. At this point, the bike cannot be trusted to stop.
VIN | Year | Model | Manufactured In |
---|---|---|---|
WB10J9307LZJ18217 | 2020 | R 1250 GS | BERLIN , GERMANY |