Dodge Ram 4500 2009

• Recall 107964 [USA]: These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. an inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Chrysler (fca us llc) expanded the affected population to include 73,712 2005-2009 ram 2500 trucks produced at the st. Louis north assembly plant. With this change, chrysler is recalling certain model year 2004-2008 ram 1500, 2005-2009 ram 2500, 2006-2009 ram 3500, 2007-2010 ram 3500 cab chassis, 2008-2010 ram 4500 and 5500 cab chassis, 2004-2009 dodge durango, 2007-2009 chrysler aspen, 2007-2012 jeep wrangler, 2008-2012 dodge challenger, 2005-2008 dodge magnum, 2005-2012 chrysler 300, 2006-2012 dodge charger, 2005-2011 dodge dakota, and 2006-2009 mitsubishi raider vehicles originally sold, or ever registered, in al, ca, fl, ga, hi, la, ms, sc, tx, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, unless included in "zone a" above, chrysler is also recalling 2004-2008 ram 1500, 2005-2009 ram 2500, 2006-2009 ram 3500, 2007-2009 ram 3500 cab chassis, 2008-2009 ram 4500 and 5500 cab chassis, 2004-2009 dodge durango, 2007-2009 chrysler aspen, 2007-2009 jeep wrangler, 2008-2009 dodge challenger, 2005-2008 dodge magnum, 2005-2009 chrysler 300, 2006-2009 dodge charger, 2005-2009 dodge dakota and 2006-2009 mitsubishi raider vehicles originally sold, or ever registered, in az, ar, de, washington d.C., il, in, ks, ky, md, mo, ne, nv, nj, nm, nc, oh, ok, pa, tn, va, and wv, or "zone b." lastly, unless included in "zone a" or "zone b" above, chrysler is recalling certain 2005-2008 ram 2500, 2006-2008 ram 3500, 2007-2008 ram 3500 cab chassis, 2008 ram 4500 and 5500 cab chassis, 2004-2008 dodge durango, 2007-2008 chrysler aspen, 2007-2008 jeep wrangler, 2008 dodge challenger, 2005-2008 dodge magnum, 2005-2008 chrysler 300, 2006-2008 dodge charger, 2005-2008 dodge dakota, and 2006-2008 mitsubishi raider vehicles originally sold, or registered, in ak, co, ct, id, ia, me, ma, mi, mn, mt, nh, ny, nd, or, ri, sd, ut, vt, wa, wi, and wy.
  chrysler will notify the chrysler, dodge, jeep and ram owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on march 27, 2017. Owners may contact chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is s43. Note: this recall supersedes recall 14v-7700.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 114733 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Chrysler (fca us llc) is recalling certain model year 2005-2009 dodge ram 2500, 2004-2008 dodge ram 1500 and durango, 2006-2009 dodge ram 3500, 2008-2010 dodge ram 4500 and 5500, 2007-2008 chrysler aspen, 2005-2010 chrysler 300, 300c, 300s, and srt8, 2006-2010 dodge charger, 2005-2008 magnum, 2005-2011 dodge dakota, and 2006-2009 mitsubishi raider vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
  chrysler will notify the affected chrysler and dodge owners and mitsubishi will notify the affected raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for chrylser on june 8, 2015. The recall for mitsubishi started on june 24, 2015. Chrysler and dodge owners may contact chrysler customer service at 1-800-853-1403. Mitsubishi owners may call 1-888-648-7820. Chrysler's number for this recall is r25. Note: this recall supersedes recall 14v817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 99605 [USA]: A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
  Chrysler group llc (chrysler) is recalling certain model year 2008-2012 ram 4500 and 5500 trucks manufactured february 20, 2007, through december 22, 2012. The left tie rod assembly may break.
  on may 19, 2015 chrysler notified owners that dealers would replace the tie rod assembly, free of charge. In july 2015, and under a consent order with nhtsa, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new dodge, jeep, chrysler, or fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on august 31, 2015. Owners may contact chrysler at 1-800-247-9753. Chrysler's recall campaign number is r16.
  this recall supersedes tie rod recall 10v657.Vehicles that were previously remedied under recall 10v657 are also affected by this campaign.Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 69793 [USA]: Loss of steering control of the vehicle could increase the risk of a crash.
  Chrysler is recalling certain model year 2008-2011 dodge ram 4500 and 5500 vehicles. These vehicles may experience a weakening and fracture of the left ball stud on the tie rod resulting in the potential loss of steering.
  chrysler will notify owners and replace the left outer tie rod free of charge. The safety recall began on march 7, 2011. Owners may contact chrysler at 1-800-853-1403.
  chrysler safety recall no. K28.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 74144 [USA]: This could result in brake failure without warning which could cause a crash.
  Chrysler is recalling certain model year 2010 chrysler sebring; dodge avenger and nitro; jeep liberty, commander and grand cherokee; and model year 2009-2010 dodge ram truck. These vehicles may have been built with an improperly formed or missing brake booster input rod retaining clip.
  chrysler will replace the brake booster input rod retaining clip free of charge. The safety recall is expected to begin during february 2010. Owners may contact chrysler at 1-800-853-1403.
  chrysler's safety campaign number is j37.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 82368 [USA]: This can decrease the driver's visibility under certain driving conditions and result in a crash without warning.
  Chrysler is recalling 36,793 my 2009 dodge ram light duty pickup trucks equipped with manual temperature control (mtc) only. The software programmed into the heating ventilation and air conditioning module may cause the windshield defrosting and defogging functions to become inoperative.
  dealers will reprogram the hvac module free of charge. The recall is expected to begin on or before august 3, 2009. Owners may contact chrysler at 1-800-835-1403.
  chrysler recall no. J12. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 84491 [USA]: When the wiper system fails, the operator will have reduced visibility which could result in a crash.
  Chrysler is recalling 65,896 my 2008-2009 light and heavy duty dodge ram pickup trucks. The windshield wiper module motor assembly may be susceptible to water intrusion that could result in partial or complete loss of windshield wiping capability.
  dealers will replace the wiper module assemblies with vented wiper motor housings free of charge. The safety recall began on august 17, 2009. Owners may contact chrysler at 1-800-853-1403.
  chrysler recall no. J10.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 87485 [USA]: Increased stopping distance and engine stalling may occur increasing the risk of a crash.
  Chrysler is recalling 504 my 2009 dodge ram 2500/3500 pickup trucks heavy duty cab chassis with manual transmission and power adjustable pedal package. The clutch pedal connecting rod to the clutch master cylinder may separate from the master cylinder. This may not allow disengagement of the clutch when the pedal is depressed, which could result in unintended vehicle movement.
  dealers will replace the clutch master cylinder hydraulic system free of charge. The recall is expected to begin during april 2009. Owners may contact chrysler at 1-800-853-1403.
  chrysler recall no. J08.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2019420 [Canada]: Other
  Issue: this recall is for aftermarket replacement rear window glass produced by vitro automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: this is a voluntary recall that is not being conducted under the requirements of the motor vehicle safety act. Safety risk: glass that breaks in to large pieces could create a risk of injury. Corrective actions: the company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “dot 287” along with the lettering “vmr” (replacement market) and a date code that is before july 2019. This information is printed on the bottom corner of the glass. Consumers should contact vitro's customer service at 1-412-995-6457 or [email protected] to arrange for replacement of the glass.

  Show Content

• Recall 2018122 [Canada]: Fuel supply
  On certain vehicles, the front fuel tank strap may become loose or detached due to corrosion of the frame bracket. This could result in the front of the fuel tank to lower, potentially allowing the front of the tank to make contact with the ground, which could increase the risk of a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: dealers will install a reinforcement bracket onto the frame.

  Show Content

• Recall 2016265 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the airbag inflator. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

  Show Content

• Recall 2015228 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes special service campaign 2015-003. Correction: dealers will replace airbag inflators. All vehicles having received a replacement inflator as part of the previous special service campaign will have a replacement inflator installed.

  Show Content

• Recall 2013397 [Canada]: Steering
  On certain 2008-2012 ram 2500 and 3500 4x4, ram 3500 cab chassis, and 2008 ram 1500 mega cab 4x4 vehicles, the left outer tie rod ball stud could fracture, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: dealers will install a redesigned left outer tie rod assembly. Note: this recall supersedes recall 2011-253 (l16). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.

  Show Content

• Recall 2013396 [Canada]: Steering
  Certain ram 4500 and 5500 four wheel drive vehicles may experience a fracture of the ball stud on the left outer tie rod assembly, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: as an interim repair, dealers will align the left tie rod end. Dealers will install a redesigned left outer tie rod assembly once parts are available. Note: this recall supersedes recall 2010-465 (k28). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.

  Show Content

• Recall 2013044 [Canada]: Powertrain
  On certain vehicles, the rear axle pinion nut could loosen and allow the rear driveshaft to detach from the axle, or fully detach from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: dealers will install a pinion nut retainer.

  Show Content

• Recall 2012327 [Canada]: Powertrain
  On certain vehicles built between july 1, 2009 and november 30, 2009, the rear axle pinion nut may have been incorrectly manufactured and could loosen. If the pinion nut was to separate from the pinion, the rear driveshaft could become detached from the rear axle, or fully detached from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: dealers will install a pinion nut retainer.

  Show Content

• Recall 2011253 [Canada]: Steering
  On certain 2008-2011 ram 2500 and 3500 4x4, ram 3500 cab chassis 4x2 and 4x4, and 2008 ram 1500 mega cab 4x4 vehicles, the left outer tie rod ball stud could fracture. Additionally, other 2003-2008 ram vehicles may have received the affected tie rod as a replacement part during service, and are therefore also involved in this campaign. Although this condition tends to occur when making a tight turn during low speed parking lot type maneuvers, tie rod failure could result in a loss of directional stability. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: dealers will inspect and, if necessary, replace the left outer tie rod end and tighten the track bar bolt. Note: the tie rod replacement portion of this recall was superseded by recall 2013-396.

  Show Content

• Recall 2010009 [Canada]: Brakes
  On certain vehicles, the brake booster input rod may have been installed without the retaining clip, or in some cases, with an improperly formed retaining clip. Should the input rod separate from the assembly it could lead to a loss of brakes, which could result in a vehicle crash causing property damage, personal injury or death. Correction: dealers will install or replace the retaining clips.

  Show Content

• Recall 2010465 [Canada]: Steering
  Certain ram 4500 and 5500 vehicles may experience a weakening and fracture of the ball stud on the left outer tie rod assembly. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: dealers will replace the left outer tie rod assembly.

  Show Content

• Recall 2009010 [Canada]: Steering
  On certain 2500 and 3500 pickup trucks, the drag link inner tie rod attachment to the pitman arm ball stud may fracture. A loss of steering control could result in a vehicle crash causing property damage, personal injury or death. Also, in some cases, the steering damper attaching bracket may yield and shift on the linkage. This may restrict the ability to turn the vehicle in one direction. Correction: dealers will replace the drag link inner tie rod assembly. The steering damper will also be inspected and, if required, the damper bracket and bolts will be replaced.

  Show Content

• Recall 2009078 [Canada]: Powertrain
  On certain dodge ram heavy duty pickup trucks equipped with a manual transmission and the optional power adjustable pedal package, the clutch pedal connecting rod to the clutch master cylinder may separate. This may not allow disengagement of the clutch when the pedal is depressed, which could result in unintended vehicle movement, increased stopping distance and engine stalling. Such an occurrence could result in a vehicle crash causing property damage, personal injury or death. Correction: dealers will replace the clutch master cylinder hydraulic system.

  Show Content

• Recall 2009080 [Canada]: Electrical
  On certain 2008 dodge ram light duty and 2008-2009 heavy duty pickup trucks, the windshield wiper motor may be susceptible to water intrusion that could result in partial or complete loss of windshield wiping capability. Should this occur during a rainy/snowy day, it could increase the risk of a crash, causing property damage, personal injury or death. Correction: dealers will replace the windshield wiper motor assembly.

  Show Content

• Recall 2009081 [Canada]: Electrical
  Certain aftermarket replacement windshield wiper motor assemblies, sold during the '08 and '09 calendar year for use as service equipment on 2002-2009 dodge ram pickup trucks, may be susceptible to water intrusion that could result in partial or complete loss of windshield wiping capability. Should this occur during a rainy/snowy day, it could increase the risk of a crash, causing property damage, personal injury or death. Correction: owners who had windshield wiper motor assemblies serviced during the '08 and '09 calendar year will be requested to take their vehicle to a chrysler dealer for inspection and repair if required.

  Show Content

• Recall 2009135 [Canada]: Heater and defroster
  On certain vehicles equipped with manual temperature control, the software programmed into the heating, ventilation and air conditioning (hvac) module may cause the windshield defrosting and defogging functions to become inoperative. This may decrease the driver's visibility under certain driving conditions and result in a vehicle crash causing property damage, personal injury or death. Correction: dealers will reprogram the hvac module software.

  Show Content

• Recall 2008401 [Canada]: Label
  Certain vehicles may have english-only airbag warning labels on the sun visors. Correction: dealers will install bilingual warning labels.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Outer tie rod failure investigation # PE11009

  Odi received complaints regarding failing tie rod ball studs on model year 2008-2011 dodge ram 2500 and 3500 vehicles resulting in loss of steering control.Chrysler concluded that misalignment of the left (driver side) ball stud on vehicles built with the cross car steering linkage system could allow contact between the bull stud and the ball housing which could weaken the stud and result in fracture.Chrysler submitted a recall notice on august 15, 2011 involving certain my 2003-2011 ram 2500 and ram 3500 pickup trucks built or repaired with the cross car steering linkage.Chrysler will inspect, repair or realign the front end of the subject vehicles as needed.Chryslers announcement of a safety recall on this matter addresses odis concerns.The odi reports cited above can be reviewed at www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification (odi) numbers:10332525, 10357937, 10366591, 10303744, 10377166, 10373240, 10343969, 10375403, 10324831, 10373546, 10370771.
  

  Show Content

My suspension/steering snapped and the dealer will not releases the vehicle to me and told me to call dodge since there is an open recall on it. I have called 3 times and nobody calls back. My truck has been at the dealer since september 2015.

Tl* the contact owns a 2009 dodge ram 4500. The contact was traveling 4 mph when the steering wheel seized. The vehicle was towed was to the dealer and the contact was advised that the front driver's side tie rod had detached from the vehicle. The manufacturer was contacted and confirmed that a recall applied to the contact's vin under nhtsa campaign id number:10v657000(steering:linkages:tie rod assembly) but was repaired one year prior to the recent failure. The manufacturer offered to make the recall repairs on the vehicle for a second time. The vehicle was not repaired. The failure mileage was 73,000.

Tl* the contact owns a 2009 dodge ram. The contact stated that while driving, the vehicle began to shake. The check engine warning light and the service needed warning light was illuminated. The vehicle was taken to the dealer however the failure was not determined. The dealer replaced the rear driver side rim, the rear and front driver and passenger side tires, and a replacement related to the rear axle however, the failure recurred. The manufacturer was made aware of the failure however no further assistance was provided. The vin was unavailable.The current mileage was 83,000. The failure mileage was 78,000.

Aluminum valve stem/tpms sensors on both front wheels corroded and failed at the same time causing two flat front tires and loss of steering. Proceeded to repair shop to have all (4) valve stems and (2) front tires replaced. Repair personnel informed us that this is an epidemic. According to them, in 2010, manufacturers became aware of this problem and began using rubber valve stem/tpms sensors. *tr

1st time electrical problem happened was under 36 thousand miles,, turned the truck off and it would not start or make a sound,, had it towed to bob williams dodge in rome ga.,,was told the problem was in main wiring harness plug. The second time electrical problem happened i was sitting still with truck idiling in a parking lot for 3 or 4 minutes then the engine just shut off and i started smelling smoke and burnt plastic,,, had the truck towed to ed voyles in marietta and they told me that it was the main wiring harness plug that shorted out again and caused the tipm and the fuse box and the circuit board inside the fusebox to burn a hole thru them the size of a baseball,, this happened at 96,000 miles,,,, so they put a band aid on it to get me out the door ,,,i asked them if they found the cause of the problem and they said they found the main harness plug shorted out but thats not the cause of the problem... The electrical problem is starting to occur again for the 3rd time at around 130,000 miles,,cruise control has quit working ,,tail lights and marker lights have quit working on truck,, trailer brakes and trailer lights have quit working,,, fuel guage will quit working and dpf full light will come on but i can move the main wiring harness plug head and the fuel guage will start back to work and dpf full warning will go off for a while,,,i need help with this ongoing issue please

After backing out of my garage, at an approx. Speed of 1 mph, i turned the wheels to the left to run an errand, and the drivers side tie rod end broke. The drag link dropped and the wheel cocked to the full left. At this point i don't know if it caused any other damage. I spoke with the nearest dealer and was told that there are no recalls on this vehicle at this time. Unfortunately i need this vehicle and had to order a new tie rod end at a cost of $116.00. Bearing any other damage, i will also have to get an alignment, at an unknown cost at this time. Thank god that i had not been traveling at a higher rate of speed when this part decided to fail, because i am sure the outcome would not have been good. *tr

Tl* the contact owns a 2009 dodge ram 4500. While attempting to start the vehicle, the ignition failed to start. The failure recurred numerous times. Also, the wires burned a hole in the side of the fuse box. The vehicle was taken to a dealer where it was diagnosed that the wiring harness and plug head failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 30,000.

Seatbelt in truck caught the door handle and locked so you cannot pull out more belt to get it off the handle. This also causes the door handle to be partially lifted which automatically unlocks and opens the door while the vehicle is parked or in motion. Even with the door cracked openas far as the belt will allow the belt will not release the handle and allow the door to open more then a few inches. If this was an accident a person could be trapped in the vehicle and not be able to get out without requiring additional equipment to cut the seatbelt or break a window. So far this has not been corrected on my vehicle we will take the truck to the dodge dealer tomorrow for now no one rides in the passenger seat. I suspect the seatbelt will need to be unbolted from the floor to unhook the belt off the door handle. I do have photos available and the issue can be replicated on the drivers and passengers doors. *tr

Tl*the contact owns a 2009 dodge ram. The contact stated that the fuel line was defective. While driving approximately 3 mph the fuel line caught fire underneath the vehicle. The contact did not state if anyone was injured. A fire report was not filed. The vehicle was taken to an authorized dealer, but was not repaired. The vin was unavailable. The failure mileage was 8000. The current mileage was 8000.

Common OBD-II Error Codes

• P0201 [1] Injector Circuit Malfunction - Cylinder 1
• P0202 [1] Injector Circuit Malfunction - Cylinder 2
• P0203 [1] Injector Circuit Malfunction - Cylinder 3
• P0204 [1] Injector Circuit Malfunction - Cylinder 4
• P0205 [1] Injector Circuit Malfunction - Cylinder 5
• P0206 [1] Injector Circuit Malfunction - Cylinder 6
• P0251 [1] Injection Pump Fuel Metering Control A Malfunction (Cam/Rotor/Injector)
• P2262 [1] Turbocharger/Supercharger Boost Pressure Not Detected - Mechanical
• C2200 [1] C2200