Ford Explorer Sport Trac 2010

• Recall 68782 [USA]: An improperly deployed airbag could result in serious injury.
  Marathon is recalling certain seat covers, brand superhides with part numbers 593, 594, 578, 960, 228, 228-09, 267-08, 333, 625, and 630, sold for use as aftermarket equipment for various passenger vehicles. These seat covers are made of heavier thread and are not compatible with seats containing side airbags. The heavier seat cover could interfere with full deployment of the airbag in the event of a crash.
  marathon will notify owners of record and replace the seat cover free of charge. The safety recall began on september 14, 2010. Owners may contact marathon at 1-800-735-2769.
  this recall only pertains to aftermarket marathon seat covers and has no relation to any original equipment installed on general motors, ford, chrysler, toyota, or nissan vehicles.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 74467 [USA]: In the event of a crash, the seatback and head restraint may move rearward, increasing the risk of injury.
  Ford is recalling certain model year 2010 fusion, explorer, explorer sport trac, and mercury milan and mountaineer vehicles manufactured between december 15, 2009 through february 3, 2010 equipped with front seat manual recliners. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 202, "head restraint." the recliner gear plate teeth may be out of dimension specification which could result in limited pawl to gear plate tooth engagement.
  dealers will replace the manual recliners for both power and manual seats free of charge. The safety recall is expected to begin on or before april 30, 2010. Owners may contact ford at 1-866-436-7332.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2010122 [Canada]: Seats and restraints
  On certain vehicles, the manual recliner mechanisms may have a gear plate teeth out of dimensional specifications, which could result in limited pawl to gear plate tooth engagement and create additional movement to the seat back. Correction: dealers will replace the front seat manual recliner mechanism(s).

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Fleet vehicle recall completion audit investigation # AQ10001

  On november 18, 2010, nhtsas recall management division (rmd) opened an audit query (aq10-001) to investigate recall remedy completion by rental car companies on safety recall campaigns.It was expected to provide the agency an indication of how completely and how quickly rental car fleets perform necessary recall-related remedies on the vehicles owned and then rented/leased for use on the roadways.Rmd queried three (3) major motor vehicle manufacturers (ford, chrysler, and general motors) and requested data regarding completion figures for fifteen (15) discreet safety recalls.Analysis of this data demonstrated that rental car recalls completion was neither complete nor consistent.The rental car companies representing the largest market share in the industry were then queried as to their respective policies for the rental, lease, and sale of vehicles with open recalls.The data and responses from the manufacturers and the rental car companies can be found in the document repository by accessing the “"associated documents" link above.In december 2015, congress enacted the fixing americas surface transportation (fast) act.One section of the act prohibits rental car companies from renting, leasing, or selling motor vehicles subject to open safety recalls.With the passage of the fast act and its prohibition, there is no continuing need for the agency to investigate rental car recall completions.Accordingly, this investigation is closed.The agency reserves the right to open any future investigations, including audits of individual recalls, or groups of recalls, or rental car companies, to examine more closely safety recalls performance and completion issues in this area.
  

  Show Content

When the brakes are engaged, that accelerator also engages causing the vehicle to not stop. Which caused a serious wreck. This has been checked out by the ford dealer on multiple occasions. Several others have also reported this issue. Truck is totaled and airbags did not deploy with direct front end impact.*dt*jb*dt*jb*dt*jb

When the brakes are engaged, that accelerator also engages causing the vehicle to not stop. Which caused a serious wreck. This has been checked out by the ford dealer on multiple occasions. Several others have also reported this issue. Truck is totaled and airbags did not deploy with direct front end impact.*dt*jb*dt*jb*dt*jb

Service rsc light comes on with the wrench light when driving the vehicle. Replaced the tcm and the problem did not go away. Codes U0101 and U1900 are popping up. Vehicle goes into limp mode. Replaced ignition coils on the left bank and it did not go away.

Service rsc light comes on with the wrench light when driving the vehicle. Replaced the tcm and the problem did not go away. Codes U0101 and U1900 are popping up. Vehicle goes into limp mode. Replaced ignition coils on the left bank and it did not go away.

The transmission will not upshift from low gear, from take off for awhile and give me the wrench sign, also will cut off the cruse control if being used or will not allow me to use it. After taking the vehicle to a transmission shop it was diagnosed to a faulty speed sensor, and was told that ford put out a safety recall on this problem because the speed sensor has down shifted to low at highway speeds locking the rear drive up and causing accidents. I have check my vehicle recalls and did not find this recall on this. I have investigated this on the internet and found that there was indeed a recall on this problem. Why would my vehicle not be recalled to replace this defective speed sensor? Before a major accident happens.

The transmission will not upshift from low gear, from take off for awhile and give me the wrench sign, also will cut off the cruse control if being used or will not allow me to use it. After taking the vehicle to a transmission shop it was diagnosed to a faulty speed sensor, and was told that ford put out a safety recall on this problem because the speed sensor has down shifted to low at highway speeds locking the rear drive up and causing accidents. I have check my vehicle recalls and did not find this recall on this. I have investigated this on the internet and found that there was indeed a recall on this problem. Why would my vehicle not be recalled to replace this defective speed sensor? Before a major accident happens.

Back hatch window intermittently opens without using remote had the actuator replaced did not fix the problem leaves my vehicle vulnerable to thieves!

Back hatch window intermittently opens without using remote had the actuator replaced did not fix the problem leaves my vehicle vulnerable to thieves!

My vehicle has been suffering a radek transmission and power train issues and i am i am told that i will need to replace it. As well when i looked up the recall for this vehicle under general year and model it does come up that the transmission is up for recall however when i typed the particular van and at stated on your website there are no outstanding recalls again conflicting with the fact that the recalls on transmissions have been noted and noteworthy in previous c 2011 explorers such as my own. Please advise and let me know if it is covered before my transmission gives up completely thank you so much for your attention. My vehicle both has a tendency to jump yours as well as idle high and transmission fluid is proper and in good condition please help me.

Common OBD-II Error Codes

• U0101 [2] Lost Communication with TCM
• U1900 [2] CAN Communication Bus Fault
• P0401 [1] Exhaust Gas Recirculation Flow Insufficient Detected
• P0106 [1] Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem
• B2292 [1] B2292