Genesis G80 2024
Vehicle Details: Decoded VIN Details, Service Bulletins
GENESIS VIN Decoder
Use the box here to look up VINs from GENESIS as well as other manufacturers
Frequently Asked Questions
-
Where is the 2024 GENESIS G80 produced?
- The 2024 GENESIS G80 is produced in Ul-san, South Korea.
-
How much horsepower does the 2024 GENESIS G80 have?
- The 2024 GENESIS G80 has 375 horsepower.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 21-BD-001G - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Genesis applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can bec
- 21-AT-015G - POWER TRAIN: This tsb provides a procedure to diagnose and repair a transmission for the following incorrect ratio dtc (transmission clutch slipping more than 200 rpm in gear).
- 19-AT-014G - POWER TRAIN:AUTOMATIC TRANSMISSION: This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift.
- 19-AT-007G - POWER TRAIN:AUTOMATIC TRANSMISSION: This bulletin provides a procedure to transfer oil pressure data to the tcu using gds mobile. This procedure is necessary to reduce the tcu learning time and improve the shift quality. I?? Before replacing an automatic transmission: input t
- 19-BE-017G - VISIBILITY:REARVIEW MIRRORS/DEVICES: Certain vehicles (listed below) equipped with the homelink5 (two way communication) mirror may experience programming and operating difficulties with the home garage system. This bulletin provides information related to some of the possible
- 19-AT-023G - POWER TRAIN:AUTOMATIC TRANSMISSION: If you are servicing a vehicle with a transmission slipping concern, follow the service procedure shown below and perform a stall test. This tsb provides a procedure to test each clutch in the transmission. If the vehicle fails the stall te
- 19-AT-012G - POWER TRAIN:AUTOMATIC TRANSMISSION: This tsb provides a procedure to diagnose and repair a transaxle for the following incorrect ratio dtc (transaxle clutch slipping more than 200 rpm in gear).
- 19-AT-008G - POWER TRAIN:AUTOMATIC TRANSMISSION: When servicing a vehicle with a a??Check engine lighta?? And any of the dtcs listed below, follow the service procedure to replace the related solenoid and e-module or park position switch.
- 24-01-011G - POWER TRAIN: Certain 2024my g80 (rg3) and 2024my g90 (rs4) vehicles may have a missing mounting bolt on the transfer case assembly. Follow the procedures listed below to inspect, and if necessary, replace the missing bolt.
- 23-DS-004G-1 - POWER TRAIN: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
- 23-EE-013G - ELECTRICAL SYSTEM: This bulletin is issued to provide the extended battery diagnosis procedure using gds. This battery diagnosis function displays the various battery-related faults such as: a?? Internal short circuit a?? Battery deterioration a?? Malfunct
- 23-DS-004G-1 - SUSPENSION: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
- 23-ST-004G-1 - STEERING: This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain genesis vehicles.
NHTSA decoded information from VIN
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Air Bag Loc Curtain | 1st and 2nd Rows |
Air Bag Loc Front | 1st Row (Driver and Passenger) |
Air Bag Loc Knee | Driver Seat Only |
Air Bag Loc Side | 1st and 2nd Rows |
Body Class | Sedan/Saloon |
DisplacementCC | 3500.0 |
DisplacementCI | 213.58310433156 |
DisplacementL | 3.5 |
Doors | 4 |
Engine Cylinders | 6 |
EngineHP | 375 |
EngineKW | 279.6375 |
Engine Manufacturer | HMC |
Engine Model | T-GDI LAMDA III |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
Fuel Type Primary | Gasoline |
Make | GENESIS |
MakeID | 5083 |
Manufacturer | HYUNDAI MOTOR CO |
Manufacturer Id | 15984 |
Model | G80 |
ModelID | 12579 |
Model Year | 2024 |
NCSA Body Type | 4-door sedan, hardtop |
NCSA Make | Hyundai |
NCSA Model | Genesis (G80) |
Plant City | UL-SAN |
Plant Country | SOUTH KOREA |
Seat Belts All | Manual |
Series | 2.5T, 2.5T Advanced, 3.5T Sport, 3.5T Sport Advanced, 3.5T Sport Prestige |
TPMS | Direct |
Turbo | Yes |
VIN | KMTGB4SD3RU210390 |
Valve Train Design | Dual Overhead Cam (DOHC) |
Vehicle Descriptor | KMTGB4SD*RU |
Vehicle Type | PASSENGER CAR |
Vehicle Documentation
[pdf]
User Manual Owner's Manual Specifications
2024 G80 OM OWNER S MANUAL 8 days ago — air bag OFF lamp is located on the overhead console The SRSCM Supplemental Apple does not assist any of NFC services Services are expected to be owners genesis us mygenesis manuals glovebox manual g80 ||| OWNER S MANUAL Operation Maintenance Specifications All information in this Owner s Manual is current at the time of publication. However, Genesis reserves the right to make changes at any time so that our policy of continual product improvement may be carried out. This manual applies to all Genesis... lang:en score:60 filesize: 14.5 M page_count: 658 document date: 2023-10-10 |
Latest VINs Decoded for this Manufacturer
VIN | Year | Model | Manufactured In |
---|---|---|---|
KMTGB4SD3RU210390 | 2024 | G80 | UL-SAN , SOUTH KOREA |