2015 HINO 338Hino 338 2015

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2015 HINO 338.

ManufacturerKnown WMI(s)Fuel Type
HINO
HINO VIN Decoder

Use the box here to look up VINs from HINO as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2015 HINO 338?
     - There are 2 recall(s) for the 2015 HINO 338, additional information is below.
NHTSA Mandated Recalls

  • Recall 123686 [USA]: Incorrect final stage manufacturer information on the certification label may hinder owner awareness of safety recalls, increasing the risk of a fire or a crash.

  • Recall 113510 [USA]: If the u-bolt was overtightened, the bolt may stretch resulting in it loosening or failing. either result may cause a loss of steering ability, increasing the risk of a vehicle crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 167-T2301-2 - EQUIPMENT ADAPTIVE/MOBILITY: Dx3 vehicle speed and cruise settings. Tt-23-006
  • SB-14-029 - EQUIPMENT: Correction of workshop manual for 2011 - 2015 my (revision of troubleshooting procedure for the dtc P2201 & P2214)
  • SB-14-028 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.
  • SB-15-030 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Dtc U02A2 def sensor communication error. On subject vehicles, the mil (malfunction indicator lamp) may illuminate with dtc (diagnostic trouble code) U02A2 stored in the engine ecu. This may be due to a malfunction of the def (diese exhaus
  • SB-15-029 - POWER TRAIN:CLUTCH ASSEMBLY: Correction of workshop manual for hino 300 series. The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing. Hino 300 s
  • SB.15.021 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.. Hino 155, 155h, 195, 238, 258, 268,338, 358
  • SB-15-007 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing. Hino 300 series with transmission (mzz6f) from june 2011 production.
  • SB-15-005 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing. Hino 300 series with engine. Hino 300 series with transmission
  • PA-2014-073 - EQUIPMENT: 2015 all-makes marketing and advertising support package
  • DOR-K2T5D-01 - FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS: This sku is a def injector. The customer communication requested return of unsold inventory to inspect the sealing. The injector sealing may have an issue which will cause a slow leak. A slow leak of the def injector can lead to crystal
  • 167-T1609-12 - SUSPENSION: Tt-16-010 air spring shield
  • 167-T1606-12 - EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH: Tt-16-005 the purpose of the tech tip is to provide information for a low power concern possibly relating to the brake switch. Hino trucks are equipped with two brake switches. First, a stop lamp switch that is designed to activate stop lam
  • 167-T1602-12 - VEHICLE SPEED CONTROL: Tt-15-031 the tech tip below is to set or change road speed on a hino conventional or coe truck. The below procedure and screen shots were taken from a conventional truck. Make sure to select 600 series for a conventional and 300 series for
  • 167-T1601-12 - EQUIPMENT: Tt-15-013 to provide a better determination of a dpf?S internal condition, a special service tool (sst) has been developed. An explanation of sst-hdt-650590 and a brief dpf inspection follows below.
  • 167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
  • 167-T1513-12 - POWER TRAIN: Tt-15-014 the transmission dtc?S P0974 and P0986, may be found on 12my-15my coe models. There could also be a complaint of low power and erratic shifting. These diagnostic codes may be set due to low voltage between the transmission case an
  • 167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
  • 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
  • 167-A1501-12 - STRUCTURE:BODY:HOOD: Sb-15-045 fiberglass repair methods have been made available to address hood crack concerns. In the event a subject vehicle experiences cracking of the hood near the hinges, this repair procedure should be used to address this condition. Wh
  • 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
  • 167-B1534-12 - POWER TRAIN: Sb-15-037 correction of cam height standard value.
  • 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
  • 167-B1527-12 - EQUIPMENT:ELECTRICAL: Sb-15-030 on subject vehicles, the mil (malfunction indicator lamp) may illuminate with dtc (diagnostic trouble code) U02A2 stored in the engine ecu. This may be due to a malfunction of the def (diesel exhaust fluid) tank sensor assembly. P
  • 167-B1523-12 - ENGINE AND ENGINE COOLING: Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
  • 167-B1515-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Sb-15-016 new parts are available to prevent repeat exhaust manifold stud failures on the j05 engine. This bulletin provides instructions for installing longer manifold studs at the #4 cylinder location.
  • 167-B1511-12 - STEERING: STEERING WHEEL/HANDLE BAR: Sb-15-011 the following tsb (technical service bulletin) outlines the inspection method for steering wheel free play and the adjustment procedure of the steering gear.
  • 167-B1510-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat P1604 dtc (diagnostic trouble code) stored in the engine ecu. A heated e
  • 167-B1426-12 - STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS: Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
  • 167-B1423-12 - EQUIPMENT:ELECTRICAL: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-B1423-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-T0610-12 - ELECTRICAL SYSTEM: 06 - 002 no throttle response. Once a burnt out tail lamp filament touches a stop lamp filament, the current goes thru the stop lamp circuit causing the ecu to think that the brakes are applied. Therefore stopping acceleration control.
  • 167-R1701-03 - ELECTRICAL SYSTEM:SOFTWARE: 17my vehicles contain the function to monitor pm sensor performance, however because the threshold for detection logic is not appropriate, the engine ecu may not detect a malfunction of the pm sensor. The following procedure provides direct
  • 167-T1701-03 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Beginning with the 2017 model year, hino changed the standard battery from a group 27 to a group 31. In the event that a group 27 battery must be replaced, it is recommended to use the group 31 as the service replacement for 2014my and newe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.