Where is the 2011 HINO CONVENTIONAL-MODELS produced?

The 2011 HINO CONVENTIONAL-MODELS is produced in, Canada.

Hino Conventional-models 2011

Vehicle Details: Service Bulletins

Below you will find all available information on the 2011 HINO CONVENTIONAL-MODELS, manufacturered by Hino Motors Canada, Ltd.

Manufacturer	Known WMI(s)	Fuel Type
HINO	2AY 5PV JHA JHB

HINO VIN Decoder

Use the box here to look up VINs from HINO as well as other manufacturers

Frequently Asked Questions

Where is the 2011 HINO CONVENTIONAL-MODELS produced?
- The 2011 HINO CONVENTIONAL-MODELS is produced in, Canada.

NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

167-T2304-1 - ELECTRICAL SYSTEM: The purpose of this procedure is to provide instructions in how to properly record nox sensors using dx3
167-W2301-3 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: Conventional diesel particulate filter (dpf) a?? Aasw0
167-W2301-1 - FUEL SYSTEM, DIESEL: Conventional nitrogen oxide (nox) sensor a?? Aapd0
167-T2301-4 - FUEL SYSTEM, DIESEL: Dx3 burner control unit (bcu) programming. Tt-23-008
167-B2212-2 - VISIBILITY: 2011my-2021my conventional exterior mirror stay. The subject vehicle may experience an exterior mirror stay that is loose or drifts slightly from its position. An enhanced mirror stay, mirror stay mount, related fasteners and revised
167-T2211-6 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: The purpose of this procedure is to provide instructions in how to properly record nox sensors using dx3.
167-T2211-5 - ENGINE AND ENGINE COOLING: The purpose of this procedure is to provide instructions in performing an injection quantity test on 2011 and newer conventional or coe series trucks with dx3.
167-T2211-3 - FUEL SYSTEM, DIESEL: The purpose of this procedure is to provide instructions in performing dcu programming on 2011 and newer conventional or coe series trucks.
167-T2211-1 - FUEL SYSTEM, DIESEL: The purpose of this procedure is to provide instructions in how to perform a burner regen recording on conventional trucks equipped with a burner style exhaust system with dx3.
167-B2206-1 - STRUCTURE: Conventional cab structure front mount repair
167-T2203-1 - EQUIPMENT: Diesel nitrogen oxide (nox) sensor part number change tech tip tt-22-004
167-B2112-1 - FUEL SYSTEM, DIESEL: Sb-21-002 conventional fuel sender leak. Certain vehicles may exhibit fuel residue accumulation around the fuel level sensor or cover plate in certain conditions, including if the vehicle is equipped with dual fuel tanks. Updated fuel
167-E2105-1 - FUEL SYSTEM, DIESEL: Deterioration of the fuel regulator piston seals due to high concentrations of biofuels or poor fuels may cause fuel to leak from the burner atomizer in the after treatment system.
167-T1001-12 - STRUCTURE: Improper body u-bolt installation on right side, near fuel lines.
167-E2103 - FUEL SYSTEM, DIESEL: Warranty enhancement program conventional burner atomizer. Deterioration of the fuel regulator piston seals due to high concentrations of biofuels or poor fuels may cause fuel to leak from the burner atomizer in the after treatment system.
PA-2016-022 - SEATS: Bostrom - ltss (light truck suspension seat) designed to fit the hino 155 & 195 coe ? Proven to reduce vibration to the occupant compared to the conventional static seat = less fatigue ? The suspension system can easily be adjusted to the
PA-2016-002 - EQUIPMENT: Hino trucks floor mats. Black durable rubber floor mats with the red hino trucks emblem. Easy to shake out the dirt and debris or clean it with soapy water.
Hino Conventiona - EQUIPMENT: Hino reference guide for conventional, my2011-2014
Floor Mats Flyer - EQUIPMENT: Floor mats sale for hino conventional (my 2005-2017) & coe (my 2012-2017)
TT-14-033 - EQUIPMENT: When replacing an engine block with service part no., 11401e0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 o
TT-14-032 - EQUIPMENT: During diagnosis of the exhaust aftertreatment system, the technician may find that the combustion chamber igniter plugs are covered in soot or appear to be excessively worn. If the igniters are dirty or have some wear, this alone does not
TT-14-031 - ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER: The tech tip below is to reset the speedometer after a tire size change or rear end gear change.
TT-14-030 - EQUIPMENT: The following procedure is for resetting the engine hour meter display showing total running time, driving time, and idling time of the vehicle in minutes and seconds. Total shows the time from engine start to engine stop. Drive or idle sho
TT-14-027 - EQUIPMENT: When replacing an audio unit for a cd player issue, the cd may not eject properly from the unit. Do not disassemble the audio unit to remove the cd. This will void any applicable warranty coverage for this repair. If the customer wishes to
TT-14-026 - EQUIPMENT: When diagnosing a concern with the scr system, the technician may notice crystallized def (diesel exhaust fluid) on the tip of the def injector. Crystallized def on the tip of the injector is a normal occurrence and does not indicate that t
TT-14-019 - BRAKES (PWS): The following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2008my-2015my hino trucks. This application only applies to brake controllers which operate us
TT-14-017 - EQUIPMENT: Bendix air dryer service
TT-14-016 - PARKING BRAKE: Exhaust combustion chamber with loose insulation
TT-14-015 - FUEL SYSTEM, GASOLINE: Def pump backflow connector change
TT-14-013 - FUEL SYSTEM, OTHER: Some customer?S may request to enable to idle shutdown to save on fuel costs and idling time. The procedure below will detail how to enable the idle shutdown timer.
TT-14-011 - BACK OVER PREVENTION: The burner control module (bcu) judges dtc?S P2441 (cav stuck), P2300 (ignition coil failure) and P060C (bcu temp sensor failure) on burner start up, if one of the fault conditions is met the bcu can go into a temporary stop mode. If this m
TT-14-004 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Exhaust control valve adjustment procedure
SB-15-014 - EQUIPMENT: Correction of workshop manual for 2011my-2014my (addition and correction of burner system)
SB-14-029 - EQUIPMENT: Correction of workshop manual for 2011 - 2015 my (revision of troubleshooting procedure for the dtc P2201 & P2214)
SB-14-028 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.
SB-14-020 - VEHICLE SPEED CONTROL: When replacing a broken hood grille, an enhanced replacement hood grille is available. This procedure should be used when installing this enhanced grille to make certain that the hood grille is correctly installed.
SB-14-016 - LANE DEPARTURE: In the event that one of the subject vehicles is driven while the abs warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an abs warning lamp illuminated can lead to overheating
SB-14-014 - EQUIPMENT: Subject vehicles may exhibit a concern where manual regeneration does not complete within one hour of depressing the manual regeneration button. In these cases, there will be no indicators showing why manual regeneration will not complete.
SB-14-013 - FUEL SYSTEM, GASOLINE: Dpr damage, "burner misfire due to excessive soot on the burner igniter surface", and "dpr push out" may occur due to the increase in the amount of soot in exhaust gas as a result of engine component degradation. In order to reduce the soot
SB-14-007 - EQUIPMENT: Addition of the troubleshooting procedure for the inspection procedure for auto regeneration is possible but not manual regeneration.
SB-14-005 - ELECTRICAL SYSTEM: The following procedure is for programming the keyless entry remote control(s) for trucks that are equipped with keyless entry system.
SB-14-003 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the revision of the inspection procedure for the dtc?S P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for serv
SA-14-026 - WHEELS: The broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised procedure h
AA0M0 - EQUIPMENT: 1) dpr system (diesel particulate regeneration) manual regeneration may not complete; this occurs when the bcu temporally detects sticking of the cav (combustion air valve). This mis-detection will cause regeneration to be suspended. In ord
TT-16-010 - SUSPENSION:REAR: Suspension - air spring shield - conventional trucks equipped with a comfort ride rear air suspension.
TT-16-007 - FUEL SYSTEM, GASOLINE: Hino conventional trucks 2013-17 model year coe truck. The vehicle may exhibit a mil lamp illuminated with dtc's P20DE, p2df, P0087, or P016F, present in the engine ecu due to fuel system contamination. Fuel contalmination can be defined as
TT-16-005 - BACK OVER PREVENTION: General - brake switch low power diagnosis. Conventionnal trucks or 2013 - 16 (155, 195) coe trucks. The purpose of the tech tip is to provide information for a low power concern possibly relating to the brake switch. Hino trucks are equipp
A-15-013 - EQUIPMENT: Conventional air horn installation.
A-15-008 - POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:FILTER/SCREEN: Diesel particulate reduction (dpr) burner fuel filter heater. A subject vehicle may experience dpr system related issues in ex treme cold weather conditions. If a good fuel quality is being used and persistent fuel gelling has been confirme
SB-16-015 - EQUIPMENT: Conventional trucks (238, 258, 268, or 338) if dtc (diagnostic trouble code) P0611: fuel injector driver charge circuit - circuit low has set in the engine ecu (electronic control unit) and the workshop manual diagnostic procedure has led t
SB-15-045 - VEHICLE SPEED CONTROL: Hino conventional trucks (238, 258, 268 or 338) equipped with a snow plow specification stationary grille. Fiberglass repair methods have been made available to address hood cra ck concerns. In the event a subject vehicle experiences cra ck
TT-15-030 - EQUIPMENT: Conventional with burner system, for trucks equipped with the burner system, certain environmental and unit applications have been foiund to cause unreliable operation of the system. Collected technical data indicates that decreasing the ma
TT-15-027 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 2011-16 hino conventional trucks equipped with an allison transmission. The information contained to be outlines scenarios that may not account for all configura tions and should be utilized as a general guideline to assist in the integrati
TT-15-026 - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER: Turbocharger diagnoslis when an exhaust restrictioin is present. Conventional trucks equipped with a j08 engine.
TT-15-025 - EQUIPMENT ADAPTIVE/MOBILITY: Def pump diagnostic tips - hino conventional trucks equipped with a j08 engine and 2013my - 2016my hino coe trucks equipped with a j05 engine.
TT-15-023 - ENGINE AND ENGINE COOLING: Hino conventional models. The long life coolant and extended long life coolant in hino conventional models differ greatly in formula and should never be mixed with other brands of coolant. The differences and information on both formulas wi
TT-15-020 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Year 2011-17 injection quantity test. Supersedes tt-13-003 dated 06/21/2013
TT-15-008 - ENGINE (PWS): Year 2011-14 conventional trucks with a j08e engine. During engine performance diagnostics, comparative readings from a like engine can be useful. Bewlow are data points from a known good engine to use for comparisions.
TT-15-002 - EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES: 2008 - 2016 headlamp condensation or water intrusion. The customer may complain of water or condensation within the headlamp assembly. If the vehicle exhibits this condition, it is necessary to first verify that all of the protective covers
HINO QR 2011-201 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Hino trucks quick reference 2011-2013 vin setup chart.
PA-2011-31 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Hino trucks offers three clarion radio options available for purchase which are detailed below.
SB-11-005 - FUEL SYSTEM, GASOLINE: The breather hose can clog up with crystallized def, which can cause the def to overflow from the tank when filling and not allow the tank to be completely filled. In this case, clean the breather hose in accordance with the following proce
SB-11-002 - FUEL SYSTEM, OTHER: Requirements of biofuel usage for 2008my thru 2012my vehicles.
10-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the correction made to the workshop manuals listed below. Please add this bulletin to the relevant pages (listed below) within your workshop manuals.
SB-11-002 - EQUIPMENT ADAPTIVE/MOBILITY: Requirements of biofuel usage for 2008my thru 2012my vehicles.
10-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the correction made to the workshop manuals listed below. Please add this bulletin to the relevant pages (listed below) within your workshop manuals.
08-003 - ENGINE (PWS): Injector clamp bolt tightening torque and procedure
SB-05-006 - EQUIPMENT: This document is to inform of the following information regarding the replacement and installation of the aisin 450-43 le automatic transmissions.
464239 - EQUIPMENT: Material safety data sheet
SB 05-004 - ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER: This document is to inform of the procedure to calibrate the pulse adjust module when needed (ex. Tire size change, rear carrier ratio change) .
167-E2010-5 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP: Residual def inside the pump may freeze and crack the pump housing. In some case def may leak on the pump connector and cause a circuit failure. This failure will cause the mil to illuminate.
167-E2010-4 - EQUIPMENT ADAPTIVE/MOBILITY: May cause the mil to illuminate due to the following: def quality misdetection, internal temp sensor failure, operating voltage misdetection, or failure of the internal power supply circuit capacitor.
167-R2010-2 - FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:INJECTORS: The seal structure of the dosing valve of the def injector may be inadequate. With an inadequate seal, water or def may enter inside the coil of the dosing valve from the seal, causing the def injector to be inoperative.
167-B2004-1 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: Sa-20-002 atomizer investigation service alert. Hino engineers are currently studying the failure mechanisms of the air/fuel atomization module (atomizer) included within the burner system of all 2011-2014 model year conventional hino truc
167-T1910-01 - ENGINE AND ENGINE COOLING: This design change of the idler gear case and idler gear bolt is to address the idler gear bolt loosening under abnormal loading from fuel supply pump and the gear train. The redesigned idler gear case and idler gear bolt are designed to
167-T1908-01 - STEERING:ELECTRIC POWER ASSIST SYSTEM: The following tech tip is for fixing hard steering or power steering pump noise on a hino conventional truck.
167-b1903-02 - FUEL SYSTEM, DIESEL: Sb-19-009 P204B dtc workshop manual correction. Workshop manual correction of diagnostic trouble code (dtc) P204B.
167-B1811-01 - SUSPENSION: Sb-18-030 air spring shield
167-B1808-02 - EQUIPMENT ADAPTIVE/MOBILITY: Sa-18-018 hino xl series parts and service support
167-B1802-02 - ELECTRICAL SYSTEM: A subject vehicle may experience a reoccurring complaint where excessive diesel fuel residue develops around the fuel level sender and/or auxiliary hole plug on factory installed single or dual fuel tank configurations. An enhanced gasket,
167-B1802-01 - SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES: The subject vehicle may experience low power and/or an uncommanded stop lamp illumination. An enhanced brake pedal return sping is available to maintain the brake pedal static position. This procedure provides direction for installation o
167-T1616-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Tt-14-031 the tech tip below is to reset the speedometer after a tire size change or rear end gear change.
167-T1613-12 - ENGINE AND ENGINE COOLING: Tt-16-014 coolant cutoff valve diag tip
167-T1609-12 - SUSPENSION: Tt-16-010 air spring shield
167-T1608-12 - FUEL SYSTEM, DIESEL: Tt16-009 current production def injectors contain enhancements including improvements to the aluminum housing. When replacing the def injector, it is necessary to install the complete def injector assembly (part no. S17j0-e0020) onto the v
167-T1607-12 - FUEL SYSTEM, GASOLINE: Tt-16-007 the vehicle may exhibit a mil lamp illuminated with dtc's P20DE, P20DF, P0087, or P016F present in the engine ecu due to fuel system contamination. Fuel contamination can be defined as the presence of water, rust, algae, bacteria
167-T1602-12 - EQUIPMENT: Tt-15-031 the tech tip below is to set or change road speed on a hino conventional or coe truck. The below procedure and screen shots were taken from a conventional truck. Make sure to select 600 series for a conventional and 300 series for
167-T1601-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Tt-15-013 to provide a better determination of a dpf?S internal condition, a special service tool (sst) has been developed. An explanation of sst-hdt-650590 and a brief dpf inspection follows below.
167-T1519-12 - ENGINE AND ENGINE COOLING: Tt-15-023 the long life coolant and extended long life coolant in hino conventional models differ greatly in formula and should never be mixed with other brands of coolant. The differences and information on both formulas will be explained
167-T1517-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Tt-15-020 the purpose of this procedure is to provide instructions in performing an injection quantity test on 2011 and newer hino conventional series trucks.
167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
167-B1101-12 - FUEL SYSTEM, OTHER: Sb-11-002 requirements of biofuel usage for 2008my thru 2012my vehicles all applied models
167-B1627-12 - POWER TRAIN: Sb-16-025 addition of vehicle condition to confirm at the time of clutch learning.
167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
167-T1506-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Tt-15-006 the following diagnostic procedure should be followed for a unit with dtc P200C. This procedure will check the integrity of the doc and the scr catalysts. If the P200C is set, the following diagnostics will need to be performed.
167-T1501-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Tt-15-027 the information contained below outlines scenarios that may not account for all configurations and should be utilized as a general guideline to assist in the integration of interfaces to hino vehicles prior to assembly and is not
167-T1428-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Tt-14-032 during diagnosis of the exhaust aftertreatment system, the technician may find that the combustion chamber igniter plugs are covered in soot or appear to be excessively worn. If the igniters are dirty or have some wear, this alone
167-T1426-12 - ENGINE (PWS): Tt-14-030 the following procedure is for resetting the engine hour meter display showing total running time, driving time, and idling time of the vehicle in minutes and seconds. Total shows the time from engine start to engine stop. Drive o
167-T1424-12 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: Tt-14-027 when replacing an audio unit for a cd player issue, the cd may not eject properly from the unit. Do not disassemble the audio unit to remove the cd. This will void any applicable warranty coverage for this repair. If the customer
167-T1423-12 - FUEL SYSTEM, DIESEL: Tt-14-026 when diagnosing a concern with the scr system, the technician may notice crystallized def (diesel exhaust fluid) on the tip of the def injector. Crystallized def on the tip of the injector is a normal occurrence and does not indi
167-T1422-12 - ELECTRICAL SYSTEM: Tt-14-025 a subject vehicle may exhibit an illuminated check engine lamp with dtc (diagnostic trouble code) P204F (malfunction of urea scr system). The dtc P204F cannot be cleared until the dcu codes have been repaired, cleared and the scr
167-T1418-12 - BRAKES (PWS): Tt-14-019 the following information applies to the installation of a customer supplied and commercially available electric trailer brake controller for all 2008my-2015my hino trucks. This application only applies to brake controllers which
167-T1413-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Tt-14-015 2011my - 2014my def pump backflow connector change. The backflow connector style on the def pumps (s17h0-e0012) and newer has changed. Existing service stock of def pumps may have the old style backflow connector installed on th
167-B1612-12 - ENGINE (PWS): The following service alert is to advise about sb-16-022 (burner atomizer repair procedure) which was released on 8/16/16 and discussed on the tech cast webinar.If the atomizer is only leaking fuel, you need to follow sb-16-022 repair proc
167-B1529-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-032 troubleshooting information and inspection procedure of the dtc/P2030 were revised.
167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
167-B1523-12 - ENGINE AND ENGINE COOLING: Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
167-B1521-12 - SUSPENSION: Sb-15-022 in the rare event that a subject vehicle equipped with the 23k comfort ride air suspension experiences a premature main leaf failure, a 23k hd comfort ride air suspension may be installed with prior approval from hmm qa.
167-B1518-12 - STRUCTURE:BODY: Sb-15-019 reinforcement brackets and fiberglass repair methods have been made available to address hood crack concerns. In the event a subject vehicle experiences cracking of the hood near the hinges, this repair procedure should be used
167-B1510-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat P1604 dtc (diagnostic trouble code) stored in the engine ecu. A heated e
167-B1415-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-14-003 the following is to inform you of the revision of the inspection procedure for the dtc?S P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
167-B1426-12 - STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS: Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
167-B1423-12 - EQUIPMENT:ELECTRICAL: Sb-14-005 2011my-2015my conventional keyless entry programming
167-B1423-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-005 2011my-2015my conventional keyless entry programming
167-T1303-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 13-003 injection quantity test 11 thru 14my
167-T1202-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 12-001 recording the burner event log (bel) on 11-13my trucks
167-P1602-12 - ENGINE (PWS): 13-008 injection pump drive case. Please note the following part number changes to the injection pump bearing case. Not replacing the correct replacement parts will result in major engine damage. The hino ordering system has been modified
167-B1704-02 - ELECTRICAL SYSTEM:SOFTWARE: Sb?17?004 enhanced engine ecu (electronic control unit) software has been made available to address the following conditions: engine torque reduction has been increased to 70%, from an original 50%, when the engine ecu detects a P244B ?