Hino Nd8j 2015
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2015 HINO Nd8j.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| HINO |
HINO VIN Decoder
Use the box here to look up VINs from HINO as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2015 HINO Nd8j?
- There are 1 recall(s) for the 2015 HINO Nd8j, additional information is below.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SB-09-001 - FUEL SYSTEM, GASOLINE: This bulletin provides diagnostic information for monitoring the engine running data to determine if the suction control valve is defective, and a service procedure for replacing the suction control valve when necessary. The scv should be t
- PA-2014-073 - EQUIPMENT: 2015 all-makes marketing and advertising support package
- SB-09-001 - BRAKES (PWS): This bulletin provides diagnostic information for monitoring the engine running data to determine if the suction control valve is defective, and a service procedure for replacing the suction control valve when necessary. The scv should be t
- 167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
- 167-T1513-12 - POWER TRAIN: Tt-15-014 the transmission dtc?S P0974 and P0986, may be found on 12my-15my coe models. There could also be a complaint of low power and erratic shifting. These diagnostic codes may be set due to low voltage between the transmission case an
- 167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
- 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
- 167-R1603-12 - ELECTRICAL SYSTEM: Scb-001-16 a subject vehicle may exhibit an illuminated check engine lamp with dtc (diagnostic trouble code) P14BF ?Egr (exhaust gas recirculation) valve controller temperature sensor 1, 2 rationality. The egr valve may falsely detect this
- 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
- 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
- 167-B1527-12 - EQUIPMENT:ELECTRICAL: Sb-15-030 on subject vehicles, the mil (malfunction indicator lamp) may illuminate with dtc (diagnostic trouble code) U02A2 stored in the engine ecu. This may be due to a malfunction of the def (diesel exhaust fluid) tank sensor assembly. P
- 167-B1523-12 - ENGINE AND ENGINE COOLING: Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
- 167-B1515-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Sb-15-016 new parts are available to prevent repeat exhaust manifold stud failures on the j05 engine. This bulletin provides instructions for installing longer manifold studs at the #4 cylinder location.
- 167-B1511-12 - STEERING: STEERING WHEEL/HANDLE BAR: Sb-15-011 the following tsb (technical service bulletin) outlines the inspection method for steering wheel free play and the adjustment procedure of the steering gear.
- 167-B1510-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat P1604 dtc (diagnostic trouble code) stored in the engine ecu. A heated e
- 167-B1426-12 - STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS: Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
- 167-B1423-12 - EQUIPMENT:ELECTRICAL: Sb-14-005 2011my-2015my conventional keyless entry programming
- 167-B1423-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-005 2011my-2015my conventional keyless entry programming
- 167-T0610-12 - ELECTRICAL SYSTEM: 06 - 002 no throttle response. Once a burnt out tail lamp filament touches a stop lamp filament, the current goes thru the stop lamp circuit causing the ecu to think that the brakes are applied. Therefore stopping acceleration control.
- 167-B0803-12 - WHEELS:LUGS/NUTS/BOLTS/STUDS: Sb - 08 - 005 this document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
- 167-B0602-12 - ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER: Sb ? 06 - 002 fuel filter usage. This bulletin provides technical information for proper fuel filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
- 167-B0601-12 - ENGINE AND ENGINE COOLING: Sb ? 06 - 001 design change of engine oil cooler housing. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
- 167-B0508-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb - 05 - 005 proper maintenance procedures for grease lubricated front axles
- 167-B0506-12 - ENGINE (PWS): Sb ? 05 - 008 this document is to inform the dealers about the addition of the pressure sensor cover and related part for the j08e engine.
- 167-B0505-12 - EQUIPMENT ADAPTIVE/MOBILITY: Sb ? 05 - 007 design change of water pipe for j08e
- 167-B0504-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Sb - 05 - 003 this document is to inform dealers and workshops on procedures to activate exhaust brake operation.
- 167-B0503-12 - ENGINE (PWS): Sb ? 05 - 010 correction to workshop manuals for the j08e engine. A) resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 ohms b) illustration of the air intake pre-heater terminal should be revised. C) r
- 167-B0502-12 - EQUIPMENT: Sb - 05 - 004 speedometer recalibration. This document is to inform of the procedure to calibrate the pulse adjust module whenneeded (ex. Tire size change, rear carrier ratio change).
- 167-B0501-12 - ENGINE (PWS): 05 - 011 corrections to workshop manuals for j08 engines. The standard gap between ends of the second piston ring and the oil ring.
- 167-R1503-12 - ELECTRICAL SYSTEM:SOFTWARE: Aa0h0 a subject vehicle may exhibit an illuminated mil (malfunction indicator lamp) with dtc (diagnostic trouble code) P0421 (atc deterioration monitoring). The engine ecu may falsely detect an issue with the atc (after turbo catalyst). Enh
- 167-R1701-03 - ELECTRICAL SYSTEM:SOFTWARE: 17my vehicles contain the function to monitor pm sensor performance, however because the threshold for detection logic is not appropriate, the engine ecu may not detect a malfunction of the pm sensor. The following procedure provides direct
- 167-T1701-03 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Beginning with the 2017 model year, hino changed the standard battery from a group 27 to a group 31. In the event that a group 27 battery must be replaced, it is recommended to use the group 31 as the service replacement for 2014my and newe