Honda Element 2007

• Recall 141844 [USA]: If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
  Dorman products, inc. (dorman) is recalling certain accelerator pedal assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 acura mdx, 2004-2008 acura tl and tsx, 2003-2007 honda accord, 2005-2006 honda cr-v, 2007-2011 honda element, 2005-2008 honda pilot and 2006-2014 honda ridgeline vehicles. The rotating portion of the accelerator pedal assembly may bind. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 124, "accelerator control systems."
  dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began december 9, 2019. Owners may contact dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is as1019xxxx.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 141618 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain 2003-2006 acura mdx, 2005-2012 rl, 2003-2007 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2006 cr-v, 2003-2011 element, 2007-2008 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began august 12, 2019. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are e5d and x5c.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 140833 [USA]: An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling specific 2003 acura 3.2cl, 2013-2016 ilx, 2013-2014 ilx hybrid, 2003-2006 mdx, 2007-2016 rdx, 2002-2003 3.2tl, 2004-2006, and 2009-2014 tl, 2010-2013 zdx and 2001-2007 and 2009 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2007 and 2010-2011 cr-v, 2003-2011 element, 2007 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
  honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began april 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is o41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is u40.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 128663 [USA]: An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
  Honda (american honda motor co.) is recalling certain 2003-2012 honda accord and pilot, 2010 accord crosstour, 2001-2011 civic, 2002-2011 cr-v, 2003-2004, 2006-2008 and 2011 element, 2007 and 2009-2013 fit, 2010-2012 insight, 2002-2004 odyssey, and 2012 ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
  honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began june 22, 2018. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are k1p, and m1o.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 123640 [USA]: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain 2005-2006 acura mdx and honda cr-v vehicles, 2005-2011 honda element vehicles, 2005-2012 acura rl vehicles, 2006-2012 honda ridgeline vehicles, 2007-2008 honda fit vehicles and 2005-2008 honda pilot vehicles originally sold, or ever registered, in alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, if not included in "zone a" above, honda is recalling certain 2005-2006 acura mdx and honda cr-v vehicles, 2005-2009 acura rl and honda element vehicles, 2007-2008 honda fit vehicles, 2005-2008 honda pilot vehicles and 2006-2009 honda ridgeline vehicles originally sold, or ever registered, in arizona, arkansas, delaware, district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, and west virginia, or "zone b." additionally, if not included in "zone a" or "zone b" above, honda is recalling certain 2005-2006 acura mdx and honda cr-v vehicles, 2005-2008 acura rl, honda element and honda pilot vehicles, 2007-2008 honda fit vehicles and 2006-2008 honda ridgeline vehicles originally sold, or ever registered in alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin, and wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
  honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan march 2017. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are kd9 and ke0.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 111887 [USA]: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2003-2006 acura mdx, 2005-2011 acura rl, 2005-2006 honda cr-v, 2003-2011 element, 2007-2008 fit, 2003-2008 pilot, 2002-2004 odyssey, and 2006-2011 ridgeline vehicles originally sold, or that have ever been registered, in alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.S. Virgin islands, or "zone a." additionally, unless included in "zone a" above, honda is recalling certain model year 2003-2006 acura mdx, 2005-2008 acura rl, 2005-2006 honda cr-v, 2003-2008 element, 2007-2008 fit, 2003-2008 pilot, 2002-2004 odyssey, and 2006-2008 ridgeline vehicles originally sold, or that have ever been registered, in arizona, arkansas, delaware, district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, and west virginia, or "zone b." lastly, unless included in "zone a" or "zone b" above, honda is recalling model year 2002-2004 odyssey and model year 2003-2004 acura mdx, honda element, and honda pilot vehicles originally sold, or registered, in alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin, and wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
  honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began june 27, 2016. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are ka0, ka1, ka2, and ka3.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 107196 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2001-2007 accord, 2001-2005 civic, 2001-2004 honda civic gx, 2003-2005 honda civic hybrid, 2002-2006 cr-v, 2003-2011 element, 2002-2004 odyssey, 2003-2008 pilot, 2006 ridgeline, 2003 acura 3.2cl, 2003-2006 acura mdx, and 2002-2003 acura 3.2tl vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
  honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on july 1, 2015. Owners may contact honda customer service at 1-888-234-2138. Owners may contact acura customer service at 1-800-382-2238, select option 4. Note: vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to september 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after september 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: this recall fully supersedes recalls 08v-593, 09v-259, 10v-041, 11v-260, 14v-351 and 15v-153. Honda's numbers for this recall are jq9, jr0, jr1, jr2, jr3, jr4, jr5, jr6, jr7, and jr8.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 90642 [USA]: Without trailer turn signal illumination, the driver's intent is not communicated, potentially increasing the risk of a crash.
  Honda is recalling certain model year 2007 through 2011 element passenger vehicles equipped with an accessory trailer hitch wiring harness. The wire that supplies power to the trailer turn signal lights was inadvertently switched with the stop lamp wire. As a result the turn signals only illuminate when the brake lamps are illuminated. This does not comply with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
  honda will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on september 20, 2012. Owners may contact honda at 1-800-999-1009.
  honda's recall campaign number is s53.Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 76363 [USA]: This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.
  Honda is recalling certain model year 2005-2010 accord, 2007-2010 cr-v, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. The outer race of the secondary shaft bearing may be broken during certain driving styles. A broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission.
  honda will notify owners and dealers will update the automatic transmission control module software free of charge. The safety recall began on august 27, 2011. Owners may contact honda automobile customer service at 1-800-999-1009.
  honda's recall campaign number is r89.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 86941 [USA]: If the owner does not have any brake service or maintenance performed over a period of months or years, the system can continue to accumulate enough air to affect braking performance, increasing the risk of a crash.
  Honda has notified nhtsa of a defect in certain model year 2007 and 2008 odyssey and element passenger vehicles manufactured between july 28, 2006 and august 21, 2008. Air can enter the vsa modular pump during an initial self-check process that occurs shortly after each time the engine is started. It is possible for enough air to enter the system to result in a brake pedal that feels soft or lower to the floor.
  honda will notify owner and honda dealers will repair the vsa modulator by removing any existing air in the brake system then apply sealant and caps to prevent air from entering the brake system free of charge. The safety recall began on may 3, 2010. Owners may contact honda at 1-800-999-1009.
  honda's recall no. R30.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 85846 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by dope, inc.The list can be found under "document search" located at the bottom of your screen. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 2021024 [Canada]: Structure
  Issue: on certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (ontario, quebec, new brunswick, nova scotia, prince edward island, and newfoundland & labrador). Safety risk: a rear trailing arm that separates could cause a loss of control and increase the risk of a crash. Corrective actions: honda will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection of the rear trailing arm front mount bolts. If the vehicle passes the inspection, the dealer will apply corrosion protection and install support braces. Honda will offer to repurchase vehicles that do not pass the inspection. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.

  Show Content

• Recall 2019117 [Canada]: Airbag
  Issue: on certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: this recall only affects certain vehicles that had a takata airbag inflator installed during a previous airbag recall or collision repair. Safety risk: in a crash where the airbag deploys, there could be an increased risk of injury. Corrective action: the company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.

  Show Content

• Recall 2017009 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the passenger frontal airbag inflator. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

  Show Content

• Recall 2015225 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes special service campaign 2014567. Correction: dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2014567 [Canada]: Airbag
  Honda canada is conducting a voluntary safety improvement campaign concerning the driver's airbag inflator on certain vehicles equipped with takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the motor vehicle safety act. Note: this special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: click here for more information

  Show Content

• Recall 2011286 [Canada]: Powertrain
  On certain vehicles, the secondary shaft bearing in the automatic transmission may fail. This could cause abnormal noise, the malfunction indicator lamp to turn on, and allow contact between the transmission idle gear and an electronic sensor housing within the transmission, resulting in a short circuit that causes the engine to stall. Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Additionally, broken pieces may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. These issues could result in property damage and/or personal injury. Correction: dealers will update the automatic transmission control module software.

  Show Content

• Recall 2010079 [Canada]: Brakes
  On certain vehicles, during the self-check process that occurs shortly after each time the engine is started, the self-diagnostic software for the vehicle stability assist (vsa) brake modulator causes a condition that can allow air to enter the modulator pump. Over time, and after starting the engine numerous times, it is possible for enough air to enter the system to change the brake pedal feel and affect braking performance. Reduced braking performance could lead to a crash causing property damage, personal injury or death. Correction: dealers will remove existing air in the brake system then apply sealant and caps to the vsa modulator to prevent air from entering the brake system.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Honda Element 2007 as well as their FCC IDs if available

• R-HON-S5T3: 2002-2011 Honda Civic Element / 3-Button Keyless Entry Remote / OUCG8D-344H-A (AFTERMARKET)
  FCC ID: OUCG8D-344H-A OUCG8D344HA
• OR-HON005: 2002-2011 Honda Civic Element / 3-Button Keyless Entry Remote / PN: 72147-S5T-A01 / OUCG8D-344H-A (OEM Refurb)
  FCC ID: OUCG8D-344H-A

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag inflator rupture investigation # EA15001

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.Odis investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

• Air in brake system investigation # EA09014

  By letter dated march 15, 2010, american honda motor corp. (hmc) notified the national highway traffic safety administration (nhtsa) that it will conduct a safety recall (nhtsa recall no. 10v-098) to address a defect in approximately 412,000 model year (my) 2007 and 2008 honda odyssey and element vehicles equipped with an abs/vsa/tcs modulator. The recalled odyssey vehicles were built from august 2006 august 2008.The recalled element vehicles were built from july 2006 to july 2008. According to honda, during an initial self-check process that occurs shortly after each engine ignition cycle, the self-diagnostic software for the vsa modulator allows a vacuum condition that can exist for several hours, allowing air to enter the vsa modulator pump.Over time, and thousands of engine ignition cycles, it is possible for enough air to enter the system to result in a brake pedal that feels soft or lower to the floor.If the customer does not have any brake service or maintenance performed over a period of months or years, the system can continue to accumulate enough air to affect braking performance.To correct the safety defect, honda dealers will remove existing air in the brake system then apply sealant and caps to the vsa modulator to prevent air from entering the brake system, free of charge. The action taken by honda is sufficient to resolve the issues raised by this investigation. The agency will continue to monitor this issue and reserves the right to take further action if warranted by the circumstances.Accordingly, this investigation is closed.
  

  Show Content

During normal driving, no hard braking involved, the passenger seatbelt consistently locks up - causing my passengers to be locked in place. It locks if a passenger leans forward to remove something from the dash cubbies (which are just outside of arms reach but well within normal range reach). It locks if the passenger leans to reach behind the driver's seat. It seems as if the belt has been designed too short or the locking mechanism overly sensitive. Should a collision happen while locked, there would be absolutely no give and could cause them significant harm.

During normal driving, no hard braking involved, the passenger seatbelt consistently locks up - causing my passengers to be locked in place. It locks if a passenger leans forward to remove something from the dash cubbies (which are just outside of arms reach but well within normal range reach). It locks if the passenger leans to reach behind the driver's seat. It seems as if the belt has been designed too short or the locking mechanism overly sensitive. Should a collision happen while locked, there would be absolutely no give and could cause them significant harm.

The srs sensor is bad due to air bag steering wheel being recalled and replaced is part of the system that air bag functions by. I believe the or all parts should recalled

The srs sensor is bad due to air bag steering wheel being recalled and replaced is part of the system that air bag functions by. I believe the or all parts should recalled

Vsa light comes on and turns off intermittently..And at times it happens on the highway which causes the car to jerk and not run right when going above 2500rpm..Then the light will go away but the cel indicator will stay on ...At my wits end and dont know what to do

Vsa light comes on and turns off intermittently..And at times it happens on the highway which causes the car to jerk and not run right when going above 2500rpm..Then the light will go away but the cel indicator will stay on ...At my wits end and dont know what to do

The indicators on my odometer and speedometer fell off into my dash, emitting the background light. I was driving the car home and parked it .When i stopped both indicators fell. I did not hit any pot holes or bumps. I have read in your complaints that this has happened before, the light is very bright and i had to place tape over it to avoid the glare very dangerous otherwise.. I can no longer tell my speed. My gas indicator does not seem to be accurate either as it falls below the empty line.

The indicators on my odometer and speedometer fell off into my dash, emitting the background light. I was driving the car home and parked it .When i stopped both indicators fell. I did not hit any pot holes or bumps. I have read in your complaints that this has happened before, the light is very bright and i had to place tape over it to avoid the glare very dangerous otherwise.. I can no longer tell my speed. My gas indicator does not seem to be accurate either as it falls below the empty line.

Tl* the contact owned a 2007 honda element. While driving approximately 35-40 mph, the contact crashed into the rear of another vehicle, which caused a chain reaction. The contact stated that the air bags failed to deploy. The contact later experienced pain in the left arm. Medical attention was not received. A police report was filed. The contact was able to drive the vehicle home. The vehicle was towed to the insurance company's lot to be inspected. The vehicle was not diagnosed and was deemed destroyed. A dealer was not contacted. The manufacturer was contacted and provided case number: 09915922. The approximate failure mileage was 310,000.

Common OBD-II Error Codes

• P2271 [1] O2 Sensor Signal Biased/Stuck Rich Bank 1 Sensor 2
• P2646 [2] A Rocker Arm Actuator System Performance/Stuck Off Bank 1
• P2647 [2] A Rocker Arm Actuator System Stuck On Bank 1
• P2651 [2] B Rocker Arm Actuator System Performance/Stuck Off Bank 1
• P2652 [1] B Rocker Arm Actuator System Stuck On Bank 1