International 9400i 2000

• Recall 2001124 [Canada]: Brakes
  On certain vehicles, the automatic slack adjuster anchor brackets can fail due to fatigue fracture and completely separate, causing the slack adjusters to function as manual slack adjusters. If the support bracket for an automatic slack adjuster fails, the brakes at that wheel end will not automatically adjust. As the brake linings wear, the vehicle will have reduced braking capacity, increasing the risk of a crash. Correction: dealers will install a new bracket on each suspect slack adjuster.

  Show Content

• Recall 2000130 [Canada]: Seats and restraints
  On certain vehicles, the four bolts that hold the bunk webbing restraint latch brackets to the bunk base may be of an incorrect grade. Grade 5 bolts were used in lieu of the required grade 8 bolts. Grade 5 bolts do not meet the original design intent of the restraint. Correction: vehicles will be inspected and all grade 5 bolts will be replaced with grade 8 bolts.

  Show Content

• Recall 2004049 [Canada]: Other
  On certain vehicles, a defect in the front wheel hub bearings will result in premature spalling which will lead to eventual breakdown of the bearing. An early breakdown of the wheel hub bearing system, when undetected, can possibly cause a wheel fire, wheel separation, loss of vehicle control, or vehicle fire. Correction: dealer will inspect the front axle hubs, and replace if necessary. This is an expansion of recall 03-134.

  Show Content

• Recall 2004074 [Canada]: Electrical
  On certain vehicles, water intrusion into the sleeper berth's bunk control panel area may pool in the tops of the dome light, tv/vcr, and/or refrigerator power switches. The led circuit boards in these switches may begin to heat up and possibly produce a flame or fire, without warning, that could cause property damage, personal injury, or death. Correction: dealer will install a water shield over the back of the entire bunk control panel.

  Show Content

• Recall 2003134 [Canada]: Other
  On certain vehicles, a defect in the front wheel hub bearings will result in premature spalling which will lead to eventual breakdown of the bearing. An early breakdown of the wheel hub bearing system, when undetected, can possibly cause a wheel fire, wheel separation, loss of vehicle control, or vehicle fire. Correction: dealer will replace front axle hubs.

  Show Content

• Recall 2000145 [Canada]: Powertrain
  On certain vehicles equipped with eaton autoshift transmissions, incorrect software in these transmissions could cause a condition whereby in certain circumstances, when reverse is selected the transmission engages 2nd gear. Incorrect gear engagement can result in a crash without prior warning. Correction: suspect software will be reprogrammed.

  Show Content

• Recall 2004074 [Canada]: Electrical
  On certain vehicles, water intrusion into the sleeper berth's bunk control panel area may pool in the tops of the dome light, tv/vcr, and/or refrigerator power switches. The led circuit boards in these switches may begin to heat up and possibly produce a flame or fire, without warning, that could cause property damage, personal injury, or death. Correction: dealer will install a water shield over the back of the entire bunk control panel.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.