2016 ISUZU ReachIsuzu Reach 2016

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2016 ISUZU Reach, manufacturered by Isuzu Motors Limited, Japan.
The vehicle is described as a 4x2 Single-unit straight truck or Cab-Chassis (GVWR range 10,001 to 19,500 lbs.).

ManufacturerKnown WMI(s)Fuel Type
ISUZUJAL Diesel
ISUZU VIN Decoder

Use the box here to look up VINs from ISUZU as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2016 ISUZU Reach produced?
     - The 2016 ISUZU Reach is produced in Fujisawa Tokyo, Japan.
  • Are there recalls for the 2016 ISUZU Reach?
     - There are 3 recall(s) for the 2016 ISUZU Reach, additional information is below.
  • What is the GVWR of a 2016 ISUZU Reach?
     - The 2016 ISUZU Reach has a GVWR of Class 3: 10,001 - 14,000 lb (4,536 - 6,350 kg) lbs.
  • How much horsepower does the 2016 ISUZU Reach have?
     - The 2016 ISUZU Reach has 150 horsepower.
NHTSA Mandated Recalls
  • Recall 195542 [USA]: The misalignment may cause the propeller shaft to separate, causing a loss of power to the rear wheels and a stall, increasing the risk of a crash.

  • Recall 141076 [USA]: If the front driveshaft detaches from the vehicle, drive power will be lost, increasing the risk of a crash. the detached driveshaft may also create a road hazard, increasing the risk of a crash for following traffic.

  • Recall 122056 [USA]: The loose bolts can allow the wheel assembly to move outward from the axle housing, affecting the control of the vehicle and reducing braking performance, thereby increasing a risk of a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
  • WB23-X-001 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: This bulletin provides information with regards to the isuzu commercial vehicle (cv) service policies and procedures manual (sppm). The isuzu cv sppm (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to an
  • IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
  • WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • IB09-X-004C - ENGINE AND ENGINE COOLING: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
  • IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
  • IB10X004L - EQUIPMENT: In an effort for continuous improvement, isuzu has a need to obtain mimamori ecu
  • ON_V1605_2016052 - SUSPENSION:FRONT:WHEEL BEARING: In some 2012-2016my isuzu stripped chassis (reach vans) and 2011-2016my npr-hd diesel trucks, the original factory-installed grease in the front wheel bearings may degrade under certain circumstances. If left unattended, the front wheel bea
  • CB16-E-001 - WHEELS: In some 2012-2016my isuzu stripped chassis (reach vans) and 2011-2016my npr-hd diesel trucks, the original factory-installed grease in the front wheel bearings may degrade under certain circumstances. If left unattended, the front wheel bea
  • DN_V1605_2016052 - SUSPENSION:FRONT:WHEEL BEARING: In some 2012-2016my isuzu stripped chassis (reach vans) and 2011-2016my npr-hd diesel trucks, the original factory-installed grease in the front wheel bearings may degrade under certain circumstances. If left unattended, the front wheel bea
  • IN_V1605_2016051 - SUSPENSION:FRONT:WHEEL BEARING: In some 2012-2016my isuzu stripped chassis (reach vans) and 2011-2016my npr-hd diesel trucks, the original factory-installed grease in the front wheel bearings may degrade under certain circumstances. If left unattended, the front wheel bea
  • IB08-X-002 - FUEL SYSTEM, DIESEL: Isuzu diesel engines available in the above affected vehicles meet the california air resource board's (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regu
  • XLF-SFT01-12 - POWER TRAIN: Technical service bulletin informing only customer of xl hybrid isuzu reach vehicles that the front drive shaft of vehicles should be regularly lubricated every 10,000 miles.
  • WB12-X-001D - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The reach van is assembled from a chassis supplied by isuzu commercial truck of america, inc., which is responsible for warrantying the engine and chassis, and a body supplied by utilimaster corporation, which is responsible for warrantying
  • ONV1605_20160527 - STEERING: In some 2012-2016my isuzu stripped chassis (reach vans) and 2011-2016my npr-hd diesel trucks, the original factory-installed grease in the front wheel bearings may degrade under certain circumstances. If left unattended, the front wheel bea
NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Axles2
Body ClassIncomplete - Stripped Chassis
Brake System TypeHydraulic
DisplacementCC3000
DisplacementCI183.0712322841
DisplacementL3
Drive Type4x2
Engine ConfigurationIn-Line
Engine Cylinders4
EngineHP150
EngineKW111.8550
Engine ManufacturerIsuzu
Engine ModelIZ3 - 4JJ1-TC
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
GVWRClass 3: 10,001 - 14,000 lb (4,536 - 6,350 kg)
MakeISUZU
MakeID542
ManufacturerISUZU MOTORS LIMITED, JAPAN
Manufacturer Id1171
ModelREACH
ModelID30819
Model Year2016
NCSA Body TypeSingle-unit straight truck or Cab-Chassis (GVWR range 10,001 to 19,500 lbs.)
NCSA MakeIsuzu
NCSA ModelMedium/Heavy – COE, low entry
NoteAxles: 1 Driving, Cab Type: Stripped Chassis (WIV), GVWR: 12,000 lbs.
Plant CityFUJISAWA
Plant Company NameIsuzu Motors Ltd.
Plant CountryJAPAN
SeriesWalk-in Van built up by Utilimaster
TurboYes
VINJALB4T172G7W00206
Vehicle DescriptorJALB4T17*G7
Vehicle TypeINCOMPLETE VEHICLE
Vehicle Documentation
[pdf] User Manual Instructions Parts List
2016 Reach Body Parts Manual This manual covers only those assemblies manufactured by or installed Utilimaster® Corporation Items such as chassis and drive train components certain 03103361 PY16EN utilimaster 2018 08
Body Parts Manual 2016 NOTE: V1 represents options that were installed earlier in 2016 and V2 ar ... ery vehicle. The most common body options are described here. Use this information as a guideline. 2016 Reach--Body Parts Manual 2 Contents Introduction...............................................
lang:en score:23 filesize: 11.06 M page_count: 160 document date: 2016-10-20
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
JALB4T177G7W014812016REACHFUJISAWA , JAPAN
JALB4T177G7W016572016REACHFUJISAWA , JAPAN
JALB4T173G7W007642016REACHFUJISAWA , JAPAN
JALB4T172G7W002062016REACHFUJISAWA , JAPAN
JALB4T17XG7W001292016REACHFUJISAWA , JAPAN
JALB4T177G7W003772016REACHFUJISAWA , JAPAN
JALB4T173G7W013022016REACHFUJISAWA , JAPAN
JALB4T172G7W009512016REACHFUJISAWA , JAPAN
JALB4T179G7W013532016REACHFUJISAWA , JAPAN
JALB4T175G7W01312016REACHFUJISAWA , JAPAN
JALB4T179G7W006382016REACHFUJISAWA , JAPAN
JALB4T175G7W012982016REACHFUJISAWA , JAPAN
JALB4T171G7W010862016REACHFUJISAWA , JAPAN
JALB4T179G7W010622016REACHFUJISAWA , JAPAN
JALB4T176G7W004662016REACHFUJISAWA , JAPAN
JALB4T178G7W003722016REACHFUJISAWA , JAPAN
JALB4T171G7W016542016REACHFUJISAWA , JAPAN
JALB4T170G7W016312016REACHFUJISAWA , JAPAN
JALB4T172G7W011762016REACHFUJISAWA , JAPAN
JALB4T171G7W001162016REACHFUJISAWA , JAPAN
JALB4T175G7W015272016REACHFUJISAWA , JAPAN
JALB4T176G7W009222016REACHFUJISAWA , JAPAN
JALB4T177G7W006372016REACHFUJISAWA , JAPAN
JALB4T176G7W012452016REACHFUJISAWA , JAPAN

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.