Jeep Wrangler 2003

• Recall 60838 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  pro-a motors will notify owners and offer to repurchase the lamps. The recall began on april 3, 2006. Owners may contact pro-a motors at 323-838-2988.
  this recall only pertains to pro-a motors aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 59333 [USA]: Loss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash.
  Certain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. These brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. Only products that were manufactured from july 27, 2005 through january 17, 2006 (date codes 0529 through 0602) are subject to this recall. When subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak.
  affinia (brake parts, inc.) will replace the subject brake hydraulic master cylinders free of charge. The recall began on march 20, 2006. Owners can contact affina group customer service at 1-800-323-0354.
  this recall only pertains to aftermarket napa, raybestos, ac delco, aimco, carquest, and bendix brake hydraulic master cylinders and has no relation to any original equipment installed on daimlerchrysler or ford vehicles.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 34172 [USA]: In the presence of an ignition source, a fuel leak could result in a fire.
  Certain aftermarket airtex electric fuel pumps installed for use as replacement equipment for certain 1997-2004 jeep wrangler; 1997-2001 jeep cherokee; 1997-2004 jeep grand cherokee; and 2000-2003 dodge dakota vehicles. The plastic electrical grommet connectors at the top of the fuel pump module are not compatible with automotive fuels and may degrade causing a potential leak path for fuel.
  airtex will notify its customers and will replace the affected fuel pumps free of charge. The recall began on january 25, 2006. Owners may contact airtex customer service department at 1-800-880-3056.
  this recall only pertains to aftermarket airtex electric fuel pumps and has no relation to any original equipment installed on jeep grand cherokee, cherokee, wrangler, or dodge dakota vehicles manufactured by daimlerchrysler.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 35476 [USA]: Should this occur, the cockpit could cause injury by striking persons outside the vehicle or could become a distraction or an obstacle to other drivers, possibly resulting in a vehicle crash.
  Bestop aftermarket rear shell roof racks,manufactured between april 27 and may 20, 2004, designed for use with the bestop hardtop made for the 1986-1995 and 1997-2003 jeep wrangler. The cockpit cover may not stay latched to the roof rack because the latch bracket mispositions the rotary latch to the cockpit cover. As a result, the cockpit cover may not stay latched to the roof rack and could separate from the roof rack. This recall only pertains to aftermarket rear shell roof racks and has no relation to any original equipment installed on jeep wrangler vehicles by daimlerchrysler.
  bestop will notify its customers and provide a repair kit and installation instructions free of charge. Owner notification began june 16, 2004. Owners who do not receive the free remedy within a reasonable time should contact bestop customer service department at (800) 845-3567.
  also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

2013 jeep wrangler. Consumer writes in regards to intermittent engine problems, while driving up hills acceleration speeds decrease. *smd the consumer stated upon driving up hills, the check engine light illuminated. The consumer stated after doing some research online, it appeared that another model was recalled for the same problem. Owners indicated the cam shaft sensors and dynamic sensor control needed a tcm update. *jb

My jeep wrangler has have the passenger safety airbag alarming since about a year ago. I contact the manufacturer and i was told that because there is not a recall for my car model, they cannot repair it and that i have to pay out of my pocket. This is an issue out of the manufacturer. Jeep must correct these safety concerns from the owners!

Airbag cover plastic on steering wheel was breaking down. The plastic became very sticky, as if someone poured a soda on it. It would not clean off with cleaners or plastic preservers. I was not confident it would work as designed if airbag deployed so i bought new airbag unit for the steering wheel. Parking brake will not hold vehicle on minor grade. It always worked until the last 2-3 years. I have had it adjusted, the cables replaced, and the brake pads replaced. It does not matter whether my brake pads are new or old. If i do not park the vehicle with the manual transmission in gear, it will move on its own, or if it does not roll backwards, it will, if any light force is applied to it. I had to install install a hydraulic brake line lock on the rear brakes to make sure my vehicle will not move on a grade i know it is an 'old' vehicle, but i like it a lot, it is well maintained and looks new. It is mechanically simple to and inexpensive to maintain. However i should not be having to buy things like airbags who's plastic degrades. I and my mechanic have no idea why the parking brake stopped working as it had before. He is a master mechanic and an expert machinist.

Tl* the contact owns a 2003 jeep wrangler. When attempting to start the vehicle, it would hesitate to start. Several attempts had to be made in order to start the vehicle. Once the vehicle was able to start, the radio would fail. When the brakes were applied, the vehicle would stall without warning. The check engine warning light was illuminated. The contact stated that the failure only occurred when operating the vehicle in the rain. The contact had not notified a dealer. The manufacturer was not made aware of the failure. The approximate failure mileage was 38,425.

The jeep was involved in a wreck - hit a power pole at around 50 mph knocked it down and the flipped the air bags never deployed - the police officer who worked the wreck said the airbags should have deployed after the type of hit the jeep took

Terrible wobble at 45-55 mph. Tires and front end wobble until i stop or slow below 40 mph. It causes driver to slow at highway speed causing near rear end collisions when other drivers are following. At times wobbles so violently have to exit freeway in order to get it to stop.

There is no low, med or high fan settings on my heater fan. Replaced heater resistor, and wiring harness due to melted harness. Still no heater fan. So as the local jeep dealership parts department had advised that there was an on going issue the heater fan switch. Replaced the switch, fan worked for about 2 hours during my mail route... After the over whelming smell of burning wires coming from inside the dash the fan quit working. So i continued to freeze the rest of my route and hoping that the jeep was not going to catch fire. I had contacted jeep's customer service line to voice my concerns, the lady told me that there was not much they could do for me where my vehicle was out of warranty. I have done some research online and there seems to be quite an issue... I believe that jeep should address the issue even though some jeeps are out of the "factory warranty". This is a huge safety problem, as to all of the wires are factory installed and should be changed and addressed quickly. *tr

At 55 mph the jeep shakes violently, from side to side, until vehicle is slowed to 35mph.

About 5 years ago i took my jeep in because when i hit bumps my radio would go off and on, when i would shake the ignition keys the radio goes on and off. Took it to the shop once they said they fixed it, did it again and i took it a second time, they charge me for new ignition switch and said my keys were to heavy causing wear tear. A few days later it was happening again and i gave up with my dealer in chicago 60660. When i heard of the recent recalls i e-mailed my local dealer and told them the issue and that now i can turn off my jeep take out the keys and radio will not shut off and i fear my safety of the ignition turning off while i am on the highway, at 70 mph. I was told i could bring it in but not covered in recall. I can not afford to pay more money to chrysler for this on going issue and will take a chance of possible death should it stall. *tr

Common OBD-II Error Codes

• P0407 [1] Exhaust Gas Recirculation Sensor B Circuit Low
• P0408 [1] Exhaust Gas Recirculation Sensor B Circuit High
• P1776 [2] Torque Converter Clutch Circuit Malfunction
• P0841 [1] Transmission Fluid Pressure Sensor/Switch "A" Circuit Range/Performance
• P0846 [1] Transmission Fluid Pressure Sensor/Switch "B" Circuit Range/Performance
• P0871 [1] Transmission Fluid Pressure Sensor/Switch "C" Circuit Range/Performance
• P0750 [1] Shift Solenoid A Malfunction
• P0755 [1] Shift Solenoid B Malfunction
• P0760 [1] Shift Solenoid C Malfunction
• P0765 [1] Shift Solenoid D Malfunction