Mack Cf 1985
Vehicle Details: Recalls, Investigations, Decoded VIN Details, Service Bulletins
Use the box here to look up VINs from MACK as well as other manufacturers
Sub-models: - Cf Aerialscope - Cf Fire Chassis -
-
Where is the 1985 MACK Cf produced?
- The 1985 MACK Cf is produced in Macungie Pennsylvania, United States (usa).
-
Are there recalls for the 1985 MACK Cf?
- There are 8 recall(s) for the 1985 MACK Cf, additional information is below.
-
What is the GVWR of a 1985 MACK Cf?
- The 1985 MACK Cf has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
Recall 20928 [USA]: A broken steering lever will cause loss of steeringcontrol without prior warning which may result in a vehicle crash.
Recall 24940 [USA]: This could result in loss of steering control, withoutprior warning, and a vehicle crash.
Recall 29761 [USA]: System: steering wheel retaining nut. vehicle description: cf model fire apparatus.
Recall 1988118 [Canada]: Brakes
Recall 1985139 [Canada]: Steering
Recall 1991079 [Canada]: Steering
Recall 1990092 [Canada]: Steering
Recall 1986058 [Canada]: Steering
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- KC-2112 - ENGINE AND ENGINE COOLING: Programming failure - chassis with cummins engine and an allison transmission
- KC-2143 - VEHICLE SPEED CONTROL: (back office) - cruise control inoperative after updating software vecu5 without esp package (uesp).
- KC-745 - POWER TRAIN: Automated manual transmission ( amt ) i-shift / mdrive - ribbon harness replacement - speed sensor bolts, possible fault codes P1058 - 21 or mid 130 pid 161 fmi 1
- KC-750 - ENGINE AND ENGINE COOLING: Us10 emission engines - diagnostic trouble code ( dtc ) spn 1231 fmi 9 troubleshooting.
- KC-663 - ENGINE AND ENGINE COOLING: Emcon (spark assist) engine aftertreatment system troubleshooting check sheet - us07 emissions
- KC-653 - ENGINE AND ENGINE COOLING: Low oil pressure diagnostic process for 11 liter engines
- KC-627 - EQUIPMENT: Premium tech tool ( ptt ) training materials and support tools
- KC-2172 - ELECTRICAL SYSTEM: No start condition after over the air programing - vecu5 no start "safe state"
- KC-2171 - ENGINE AND ENGINE COOLING: Temperature sensor troubleshooting guide - us10+obd13 and newer
- KC-2170 - SUSPENSION: Electronically controlled suspension (ecs) losing air pressure
- KC-2169 - ELECTRICAL SYSTEM: Low voltage disconnect (lvd), function description
- KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions
- KC-2161 - ENGINE AND ENGINE COOLING: Def pump cycling periodically hours after key off
- KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
- KC-2131 - ENGINE AND ENGINE COOLING: Use for new vehicles (us21+obd22 emissions) - intermittent diagnostic trouble codes U02A3, U029D, U029E
- KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions
- KC-626 - POWER TRAIN: Mack chassis - vehicles equipped with an automated manual transmission model f ( amt-f, mdrive ), premium tech tool ( ptt ) gearbox calibration failure; gearbox calibration operation stops and fails at 33% when run with transmission removed
- KC-648 - POWER TRAIN: Mack - pto pump speed calculator
- KC-686 - VEHICLE SPEED CONTROL: (back office only) mack chassis - cruise control inoperative after disabling the electronic stability program (esp)
- KC-698 - ENGINE AND ENGINE COOLING: Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after def pump failure or system contamination
- KC-699 - ELECTRICAL SYSTEM: Mack chassis - bendix vendor configuration program ( vcp ) software download information
- KC-714 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble codes ( dtc's ) - P020113, P020213, P020313, P020413, P020513, P020613, cylinders 1 through 6 injector a open circuit
Steering boost cylinder investigation # PE90108
There is no summary currently available
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Cab Type | MDHD: CAE (Cab Above Engine) |
Body Class | Truck-Tractor |
Brake System Type | Air |
DisplacementCC | 11000 |
DisplacementCI | 672 |
DisplacementL | 11 |
Engine Cylinders | 6 |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
GVWR | Class 8: 33,001 lb and above (14,969 kg and above) |
Make | MACK |
MakeID | 490 |
Manufacturer | MACK TRUCKS INC. |
Manufacturer Id | 1027 |
Model | CF |
ModelID | 15301 |
Model Year | 1985 |
NCSA Body Type | Truck-tractor (Cab only, or with any number of trailing unit; any weight) |
NCSA Make | Mack |
NCSA Model | Medium/Heavy – COE entry position unknown |
Plant City | MACUNGIE |
Plant Country | UNITED STATES (USA) |
Plant State | PENNSYLVANIA |
Series | 600 |
VIN | 1M1A209Y4FM048660 |
Vehicle Descriptor | 1M1A209Y*FM |
Vehicle Type | TRUCK |
VIN | Year | Model | Manufactured In |
---|---|---|---|
1M1A209Y4FM048660 | 1985 | CF | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |
1M1A209YXFM052566 | 1985 | CF | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |