Mack Cl 1998

• Recall 4548 [USA]: The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
  On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning.
  the dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. Owner notification began april 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
  mack truck recall no. Sco273. Consumers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-327-4236.

  Show Content

• Recall 11631 [USA]: If the spindle fails, a loss of driver control could occur, increasing the risk of a vehicle crash.
  Vehicle description: class 8 heavy duty truck chassis equipped with mack 16,000 lb., 18,000 lb., or 20,000 lb. Heavy duty steering axles. The inner wheel bearing cone for the steering axle wheel hub assembly does not properly fit onto the mack steering axle spindle assembly. Improper fit of the bearing to the spindle increases the stress levels to the steering axle spindle which could cause spindle failure.
  dealers will remove the left and right hub/drum assemblies from the steering axles and replace the inner wheel bearing cones and cups.
  owner notification began april 26, 1999. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011. Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2002189 [Canada]: Brakes
  On certain vehicles, additional axles were installed to increase the gross vehicle weight capacity but the parking brake capacity was not increased accordingly therefore not complying with cmvss 121 regulations. Correction: the dealer will perform repairs as necessary.

  Show Content

• Recall 1999042 [Canada]: Suspension
  On certain vehicles, an improperly machined steering axle wheel hub inner wheel bearing cone can result in an improper fit onto the steering axle spindle assembly, which can eventually cause spindle failure. If the spindle fails there could be a loss of driver control and a crash without prior warning. Correction: inner wheel bearing cones and cups will be replaced on affected vehicles.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Consumer who wrote this complaint, german sanchez po box 7264 caguas pr 00726 787-413-4631 or 787-745-0613, was parked on the side of the road in his 1993 mitsubishi mirage when the left rear wheel of mack truck came loose and hit the vehicle, sanchez sustained head trauma, injury to the right shoulder, lower back and emotional damages. *tt

Common OBD-II Error Codes

• P1058 [1] P1058
• U029D [1] Lost Communication With NOX Sensor "A"
• U029E [1] Lost Communication With NOX Sensor "B"
• U02A3 [1] U02A3
• P0201 [1] Injector Circuit Malfunction - Cylinder 1
• P0202 [1] Injector Circuit Malfunction - Cylinder 2
• P0203 [1] Injector Circuit Malfunction - Cylinder 3
• P0204 [1] Injector Circuit Malfunction - Cylinder 4
• P0205 [1] Injector Circuit Malfunction - Cylinder 5
• P0206 [1] Injector Circuit Malfunction - Cylinder 6