Mack Mr 1994
Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins
MACK VIN Decoder
Use the box here to look up VINs from MACK as well as other manufacturers
Frequently Asked Questions
-
Where is the 1994 MACK Mr produced?
- The 1994 MACK Mr is produced in Macungie Pennsylvania, United States (usa).
-
Are there recalls for the 1994 MACK Mr?
- There are 3 recall(s) for the 1994 MACK Mr, additional information is below.
-
What is the GVWR of a 1994 MACK Mr?
- The 1994 MACK Mr has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
-
How much horsepower does the 1994 MACK Mr have?
- The 1994 MACK Mr has 350 horsepower.
NHTSA Mandated Recalls
Recall 15233 [USA]: If the air dryer separates from the base, the cartridge can separate sufficiently enough to cause personal injury or property damage.
Recall 1995126 [Canada]: Brakes
Recall 1995210 [Canada]: Other
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- KC-2112 - ENGINE AND ENGINE COOLING: Programming failure - chassis with cummins engine and an allison transmission
- KC-2143 - VEHICLE SPEED CONTROL: (back office) - cruise control inoperative after updating software vecu5 without esp package (uesp).
- KC-745 - POWER TRAIN: Automated manual transmission ( amt ) i-shift / mdrive - ribbon harness replacement - speed sensor bolts, possible fault codes P1058 - 21 or mid 130 pid 161 fmi 1
- KC-750 - ENGINE AND ENGINE COOLING: Us10 emission engines - diagnostic trouble code ( dtc ) spn 1231 fmi 9 troubleshooting.
- KC-663 - ENGINE AND ENGINE COOLING: Emcon (spark assist) engine aftertreatment system troubleshooting check sheet - us07 emissions
- KC-653 - ENGINE AND ENGINE COOLING: Low oil pressure diagnostic process for 11 liter engines
- KC-627 - EQUIPMENT: Premium tech tool ( ptt ) training materials and support tools
- KC-2172 - ELECTRICAL SYSTEM: No start condition after over the air programing - vecu5 no start "safe state"
- KC-2171 - ENGINE AND ENGINE COOLING: Temperature sensor troubleshooting guide - us10+obd13 and newer
- KC-2170 - SUSPENSION: Electronically controlled suspension (ecs) losing air pressure
- KC-2169 - ELECTRICAL SYSTEM: Low voltage disconnect (lvd), function description
- KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions
- KC-2161 - ENGINE AND ENGINE COOLING: Def pump cycling periodically hours after key off
- KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
- KC-2131 - ENGINE AND ENGINE COOLING: Use for new vehicles (us21+obd22 emissions) - intermittent diagnostic trouble codes U02A3, U029D, U029E
- KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions
- KC-626 - POWER TRAIN: Mack chassis - vehicles equipped with an automated manual transmission model f ( amt-f, mdrive ), premium tech tool ( ptt ) gearbox calibration failure; gearbox calibration operation stops and fails at 33% when run with transmission removed
- KC-648 - POWER TRAIN: Mack - pto pump speed calculator
- KC-686 - VEHICLE SPEED CONTROL: (back office only) mack chassis - cruise control inoperative after disabling the electronic stability program (esp)
- KC-698 - ENGINE AND ENGINE COOLING: Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after def pump failure or system contamination
- KC-699 - ELECTRICAL SYSTEM: Mack chassis - bendix vendor configuration program ( vcp ) software download information
- KC-714 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble codes ( dtc's ) - P020113, P020213, P020313, P020413, P020513, P020613, cylinders 1 through 6 injector a open circuit
NHTSA decoded information from VIN
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
| Variable | Value |
|---|---|
| Body Cab Type | MDHD: LCF (Low Cab Forward) |
| Body Class | Truck |
| Brake System Type | Air |
| DisplacementCC | 11929.782592 |
| DisplacementCI | 728 |
| DisplacementL | 12 |
| Engine Cylinders | 6 |
| EngineHP | 350 |
| EngineKW | 260.9950 |
| Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
| GVWR | Class 8: 33,001 lb and above (14,969 kg and above) |
| Make | MACK |
| MakeID | 490 |
| Manufacturer | MACK TRUCKS INC. |
| Manufacturer Id | 1027 |
| Model | MR |
| ModelID | 9431 |
| Model Year | 1994 |
| NCSA Body Type | Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.) |
| NCSA Make | Mack |
| NCSA Model | Medium/Heavy – Unknown engine location |
| Plant City | MACUNGIE |
| Plant Country | UNITED STATES (USA) |
| Plant State | PENNSYLVANIA |
| Series | 600 |
| Trim | MR688S |
| VIN | 1M2K189C1RM005341 |
| Vehicle Descriptor | 1M2K189C*RM |
| Vehicle Type | INCOMPLETE VEHICLE |
Latest VINs Decoded for this Manufacturer
| VIN | Year | Model | Manufactured In |
|---|---|---|---|
| 1M2K189C1RM005341 | 1994 | MR | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |
| 1M2K195C9RM004773 | 1994 | MR | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |
| 1M2K195C6RM005444 | 1994 | MR | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |