Mack Rd 1999

• Recall 1400 [USA]: If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
  On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
  dealers will replace the ball socket assemblies. This campaign will supersede nhtsa recall nos. 01v-140-005 (mack sC0270) and 00v-246-103 (mack sC0262). Owner notification began december 27, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
  mack truck recall no. Sco276.Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 4541 [USA]: The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control.
  On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning.
  the dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. Owner notification began april 22, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337.
  mack truck recall no. Sco273. Consumers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-327-4236.

  Show Content

• Recall 5324 [USA]: This condition could cause the pedal to go to full throttle if both return springs break, increasing the risk of a crash.
  Vehicle description: class 8 trucks equipped with felsted electronic accelerator pedals. The return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated wire return springs.
  replacement accelerator pedals equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating will be installed.
  owner notification began december 13, 2000.Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011. Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 5804 [USA]: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
  Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
  dealers will remove and replace all affected tie rods and drag links with different designed ends.
  owner notification began december 13, 2000.Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011. Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2002057 [Canada]: Suspension
  On certain heavy-duty trucks equipped with dana spacer tandem drive axle models ds463 an undersized attachment weld may fracture without warning. The loss of this attachment to the vehicle chassis can adversely affect vehicle or driver control. Correction:

  Show Content

• Recall 2002059 [Canada]: Steering
  Certain heavy-duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness. This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle. Correction: dealers will remove and replace all affected tie rods and drag links with different designed ends. Trucks that have been repaired under recall 00v246103/sC0262 will not be re-recalled. Trucks only inspected and determined to have an acceptable date code under sC0262 will be recalled under this campaign.

  Show Content

• Recall 2002132 [Canada]: Steering
  Certain heavy-duty trucks equipped with trw 20-edl ball sockets were manufactured with a case depth and/or hardness that were below specifications. A bearing that is below specification may prematurely wear-out the ball socket, which, in turn, may lead to a separation of the tie rod. Correction: dealers will replace the tie rods.

  Show Content

• Recall 2002189 [Canada]: Brakes
  On certain vehicles, additional axles were installed to increase the gross vehicle weight capacity but the parking brake capacity was not increased accordingly therefore not complying with cmvss 121 regulations. Correction: the dealer will perform repairs as necessary.

  Show Content

• Recall 2000248 [Canada]: Engine
  On certain vehicles, the return springs on the accelerator pedals are made of stainless steel or electroplated music wire. The design fatigue stress of the stainless steel springs is in a range that would predict that some failures would occur. The music wire springs can fail due to stress risers created by electrical arcing during electroplating. Correction: accelerator pedals will be replaced with ones equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.