Mack Rw 1992
Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins
Use the box here to look up VINs from MACK as well as other manufacturers
-
Where is the 1992 MACK Rw produced?
- The 1992 MACK Rw is produced in Macungie Pennsylvania, United States (usa).
-
Are there recalls for the 1992 MACK Rw?
- There are 1 recall(s) for the 1992 MACK Rw, additional information is below.
-
What is the GVWR of a 1992 MACK Rw?
- The 1992 MACK Rw has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
-
How much horsepower does the 1992 MACK Rw have?
- The 1992 MACK Rw has 400 horsepower.
Recall 19528 [USA]: In the event the primary throttle return fails, failure of the secondary throttle return system would not provide protection against loss of throttle control.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- KC-2112 - ENGINE AND ENGINE COOLING: Programming failure - chassis with cummins engine and an allison transmission
- KC-2143 - VEHICLE SPEED CONTROL: (back office) - cruise control inoperative after updating software vecu5 without esp package (uesp).
- KC-745 - POWER TRAIN: Automated manual transmission ( amt ) i-shift / mdrive - ribbon harness replacement - speed sensor bolts, possible fault codes P1058 - 21 or mid 130 pid 161 fmi 1
- KC-750 - ENGINE AND ENGINE COOLING: Us10 emission engines - diagnostic trouble code ( dtc ) spn 1231 fmi 9 troubleshooting.
- KC-663 - ENGINE AND ENGINE COOLING: Emcon (spark assist) engine aftertreatment system troubleshooting check sheet - us07 emissions
- KC-653 - ENGINE AND ENGINE COOLING: Low oil pressure diagnostic process for 11 liter engines
- KC-627 - EQUIPMENT: Premium tech tool ( ptt ) training materials and support tools
- KC-2172 - UNKNOWN OR OTHER: No start condition after over the air programing - vecu5 no start "safe state"
- KC-2171 - ENGINE AND ENGINE COOLING: Temperature sensor troubleshooting guide - us10+obd13 and newer
- KC-2170 - SUSPENSION: Electronically controlled suspension (ecs) losing air pressure
- KC-2169 - ELECTRICAL SYSTEM: Low voltage disconnect (lvd), function description
- KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions
- KC-2161 - ENGINE AND ENGINE COOLING: Def pump cycling periodically hours after key off
- KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
- KC-2131 - ENGINE AND ENGINE COOLING: Use for new vehicles (us21+obd22 emissions) - intermittent diagnostic trouble codes U02A3, U029D, U029E
- KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions
- KC-626 - POWER TRAIN: Mack chassis - vehicles equipped with an automated manual transmission model f ( amt-f, mdrive ), premium tech tool ( ptt ) gearbox calibration failure; gearbox calibration operation stops and fails at 33% when run with transmission removed
- KC-648 - POWER TRAIN: Mack - pto pump speed calculator
- KC-686 - VEHICLE SPEED CONTROL: (back office only) mack chassis - cruise control inoperative after disabling the electronic stability program (esp)
- KC-698 - ENGINE AND ENGINE COOLING: Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after def pump failure or system contamination
- KC-699 - ELECTRICAL SYSTEM: Mack chassis - bendix vendor configuration program ( vcp ) software download information
- KC-714 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble codes ( dtc's ) - P020113, P020213, P020313, P020413, P020513, P020613, cylinders 1 through 6 injector a open circuit
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Cab Type | MDHD: CBE (Cab Behind Engine) |
Body Class | Truck-Tractor |
Brake System Type | Air |
DisplacementCC | 14633.648152 |
DisplacementCI | 893 |
DisplacementL | 14.6 |
Engine Cylinders | 6 |
EngineHP | 400.00 |
EngineKW | 298.280000 |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
GVWR | Class 8: 33,001 lb and above (14,969 kg and above) |
Make | MACK |
MakeID | 490 |
Manufacturer | MACK TRUCKS INC. |
Manufacturer Id | 1027 |
Model | RW |
ModelID | 15302 |
Model Year | 1992 |
NCSA Body Type | Truck-tractor (Cab only, or with any number of trailing unit; any weight) |
NCSA Make | Mack |
NCSA Model | Medium/Heavy - CBE |
Plant City | MACUNGIE |
Plant Country | UNITED STATES (USA) |
Plant State | PENNSYLVANIA |
Series | 700 |
Trim | RW753 |
VIN | 1M2AY38Y7NM001781 |
Vehicle Descriptor | 1M2AY38Y*NM |
Vehicle Type | INCOMPLETE VEHICLE |
VIN | Year | Model | Manufactured In |
---|---|---|---|
1M2AY38Y7NM001781 | 1992 | RW | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |
1M2AY82YXNM005930 | 1992 | RW | MACUNGIE PENNSYLVANIA, UNITED STATES (USA) |