Mazda Mx-6 1992
Vehicle Details: Recalls, Consumer Complaints, Service Bulletins
Use the box here to look up VINs from MAZDA as well as other manufacturers
-
Where is the 1992 MAZDA Mx-6 produced?
- The 1992 MAZDA Mx-6 is produced in Wasington Dc, United States (usa).
-
Are there recalls for the 1992 MAZDA Mx-6?
- There are 2 recall(s) for the 1992 MAZDA Mx-6, additional information is below.
Recall 21134 [USA]: If the retaining ring does not sit correctly in thegroove, the axle lug nuts will break, causing the brake drum, wheel, and tireassembly to separate from the vehicle.
Recall R/2016/210 [UK]: Fire may occur
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 0900716 - ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER: Speedometer replacement procedure
- MT-002-22 - ELECTRICAL SYSTEM: Radio unlocking codes.
- 00-003-19-3583 - ENGINE AND ENGINE COOLING: In support of the new mrt distribution, mazda will ship to dealers a new dual purpose diagnostic leak detector beginning march, 2019. Training videos will be posted to mgss shortly and workshop manual procedures will be revised gradually.
- 09-009-19-3566 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer's responsibility to co
- 09-034-18-3430a - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer's responsibility to co
- 09-034-18-3430 - VEHICLE SPEED CONTROL: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer's responsibility to co
- 09-035-17-3080 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealer?S responsibility to co
- 09-034-14-2956 - EQUIPMENT ADAPTIVE/MOBILITY: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.Note:?Mazda vehicles are manufactured with tamper-proof speedometers.?When a speedometer is replaced, the new speedometer will read zero
- 0102504 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Battery test procedure requirements. *tt
- 0902604 - EQUIPMENT:ELECTRICAL: Speedometer replacement procedure. *tt
- 97102302097 - STRUCTURE:BODY:BUMPERS: Pre-painting preparations for front and rear bumpers. *yc
- 007/97T - AIR BAGS: Parts replacement after airbag deployment. *tw
- 001/97G - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Maintenance free battery - diagnostic and charging procedure. *tw
- 008/97 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Use of a/c tracer dye. *tw
- 003/97G - ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS: Wiper motor inoperative - circuit breaker activation. *tw
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
No | No | N | None | None | 20011028 |
While driving vehicle at operating temp, car will die and have to wait about three minutes before restarting.
No | No | N | None | None | 19981021 |
Recall # 97v211000 mazda/automatic shoulder belt rail; dealer did not expect shoudler belt rail as stated in recall notice. Consumer was told that system did not need to be inspected unless it was not working. *ak
No | No | N | None | None | 19960310 |
Buckle on motorized cable on left driver side sticks in resume position. *ak
No | No | N | None | None | 19950204 |
Rear window shattered. Tt
No | No | N | None | None | 19930905 |
Mechanic stated that the mounting ofthe struts was defective in the early 1992 models and the cause of failure is bumps in the road. Also stated that it would probably happen again and it did. Mazda would only pay for parts this time since the warranty (time not mileage) had expired.
No | No | N | None | None | 19930830 |
Right andleft upper struts in front end.Mechanic said it was an inherent defect and would probably happen again. The problem was corrected on later models.
No | No | N | None | None |
Selector lever was replaced, it would not operate correctly. *slc