Mcneilus Contender Front Loader 2017

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 143192 [USA]: If the prd does not activate in the event of a buildup of pressure, the cng tank may explode, increasing the risk of fire and injury.
    Mcneilus truck & manufacturing, inc. (mcneilus) is recalling certain 2013-2018 bridgemaster mixer, standard mixer, model 49 autoreach side loader, model 48 zero radius side loader, model 78 meridian front loader, model 29 atlantic front loader, model 87 contender front loader, model 42 manual automated side loader, model 16 3.5 yard tg rear loader, model 11 heavy duty rear loader, model 66 40.60 split body rear loader, model 10 standard rear loader, model 12 tailgate tag axle rear loader, and model 13 high compaction rear loader vehicles. The vehicles are powered with compressed natural gas (cng) and are equipped with pressure relief devices (prd) that may not function as designed, failing to vent a buildup of pressure, such as could occur if the cng tank was exposed to fire.
    mcneilus will notify owners, and dealers will inspect and replace the prd's, as necessary, free of charge. The recall began october 30, 2019. Owners may contact mcneilus customer service at 1-888-686-7278.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • MISC-TSIB-081 - FUEL SYSTEM, GASOLINE: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • MISC-TSIB-081 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: According to an amended ruling in the visual inspection labeling requirement in federal motor vehicle safety standard (fmvss) no. 304, the periodic inspection interval for compressed natural gas (cng) fuel containers has been modified to
  • MISC-TSIB-079 - EQUIPMENT: Mcneilus truck and manufacturing provides these instructions for installing a hydraulic reservoir cork gasket. The installation of this gasket will repair leaks coming from the gasket between the in-tank filter and the reservoir.
  • MISC-TSIB-075-A - EQUIPMENT:MECHANICAL: The following information describes how to purge air and release stored hydraulic energy from a hydraulic system. All manual override features are intended for emergency use, not for continuous-duty operation.
  • FEL-TSIB-061 - STRUCTURE: This repair procedure describes how to reinforce the rear inner radius of the arm, the arm base, and the top arm fork lug on all pacific (model 85), pacific ultra (model 76), and contender (model 87) front end loaders. Perform this repair
  • MISC-TSIB-078 - EQUIPMENT: Mcneilus truck and manufacturing offers these instructions for ejector cylinder bypass testing.
  • No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for mcneilus truck & manufacturing, inc.
  • FEL-TSIB-053-A - EQUIPMENT: This bulletin, previously released in october 2017, has been updated to correct the affected model years. This technical service information bulletin describes the replacement of a refuse deflector with a cover system that provides enhance
  • FEL-TSIB-052-A - EQUIPMENT: This bulletin, previously released in october 2017, has been updated to correct the affected model years. This technical service information bulletin describes the replacement of a refuse deflector with a cover system that provides enhance
  • FEL-TSIB-052 - STRUCTURE: This technical service information bulletin describes the replacement of a refuse deflector with a cover system that provides enhanced refuse deflection. The refuse deflector system is designed to sweep refuse off of the hopper cover and in
  • FEL-TSIB-053 - STRUCTURE: This technical service information bulletin describes the replacement of a refuse deflector with a cover system that provides enhanced refuse deflection. The refuse deflector system is designed to sweep refuse off of the hopper cover and in
  • MISC-TSIB-072 - - STRUCTURE: This technical service information bulletin describes the replacement of a snapper pin with a bolted joint in the body service lift pin assembly. The body service lift is used to raise the refuse collection body during maintenance operation

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.