Mercedes Benz C320 2007
Vehicle Details: Consumer Complaints, Service Bulletins
Below you will find all available information on the 2007 MERCEDES BENZ C320.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| MERCEDES BENZ |
MERCEDES BENZ VIN Decoder
Use the box here to look up VINs from MERCEDES BENZ as well as other manufacturers
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- NCU - 24240304 - STRUCTURE:BODY: As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, mercedes-benz usa, llc (mbusa) has entered into a settlement regarding claims relating to alleg
- LI91.18-P-077075 - SEATS: Crease formation on genuine leather seat covers in vehicles with low mileage ??A?A? Objects left on the seats for extended periods of time (pressure marks). ??A?A? Objects wedged between the seat backrest and seat cushion (e.G. Seat bel
- RecallUpdate - AIR BAGS: Recall campaign announcement for takata driver airbags.
- LI8270P055572 - ELECTRICAL SYSTEM:SOFTWARE: Mobile phone cotacts are not transferred completely.
- LI54.30-P-072145 - ELECTRICAL SYSTEM: Ntg5.5: incorrect time shown on instrument cluster, comand display, and analog clock
- LI42.47-P-067502 - ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC): If the customer brakes sharply from a speed of > 30mph, without abs intervention, there is a single cracking noise from the area of the esp hydraulic unit
- LI27.50-P-071658 - POWER TRAIN: Harsh engagement when changing gear range from p to d or r
- LI82.85-P-055695 - ELECTRICAL SYSTEM: The comand unit does not start or the comand display remains dark. The comand unit cannot be operated. Note: the problem disappears after a lengthy idle period (>6h) or after interrupting the power supply (circuit 30).
- LI47.20-P-054958 - FUEL SYSTEM, GASOLINE: Combination message: "clean fuel filter" is displayed. The fault code 162500 (water level message - bosch) or P226997 (water level message - delphi) or 171600 (filter load - bosch) is stored in the engine control unit.
- LI05.10-P-058758 - ENGINE AND ENGINE COOLING: Noise: a rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: fault code entries in engine control unit: sim271de20: P001177 the position of the intake camshaft (cylinder bank
- LI35.30-P-058566 - POWER TRAIN: Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). Heard once when changing from forward to reverse (and vice versa)
- C1A140101 - EQUIPMENT:ELECTRICAL: This customer 1 action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the verizon
- LI91.25-P-059380 - SEATS: Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
- LI91.10-P-059391 - SEATS: Noise from the front seats during load change.
- LI91.10-P-049799 - ELECTRICAL SYSTEM: The presence of a quiescent current can have several causes. These are not always recognized and lead to an increased number of ok components being removed. Possible hall sensor faults or normalization faults can exist which can be elimin
- LI91.10-P-048503 - SEATS: Grunting noise or ripping noise at seat-back lining
- LI91.10-P-048498 - SEATS: Noises from area of seat adjuster or cushion frame.
- LI91.10-P-048497 - STRUCTURE: Noise complaints when load on backrest frame changes. Affects the driver and front passenger seats. Also perform the remedial action if you are performing work on: - backrest frame - backrest cover or - guide rail of head restraint. I
- LI33 30-P-056665 - SUSPENSION: Throttle lift-off clunking noises at drive shafts of front axle
- P-SC-2017030011 - AIR BAGS: Replace driver-side and (if applicable) front passenger air bag
- LI91 45-P-066075 - SEAT BELTS: Seat belt extender toothed rack sluggish or makes noises
- LI05.10-P-049909 - ENGINE AND ENGINE COOLING: Engine noises after engine start
- LI32.25-P-061137 - SUSPENSION:REAR:SHOCK ABSORBER: Clunking noise from front axle suspension strut or rear axle shock absorber on short strokes of the damper
- SC-2012070002 - ELECTRICAL SYSTEM:WIRING: Mercedes: camshaft adjustment solenoid may leak oil due to settling properties of seal and the engine wiring harness will be retrofitted with four adapter harnesses as a precautionary measure. Models 2005-2011 164, 171, 203, 204, 207, 209
- LI-03-30 - ENGINE AND ENGINE COOLING:ENGINE: Mercedes benz: engine light is on with stored trouble codes. *rm
- LI-88-70 - EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT: Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences. *rm
- SB-32-25-82 - SUSPENSION:REAR:SHOCK ABSORBER: Mercedes-benz: shock absorber procedure. *rm
- LI-82-10/598B - EXTERIOR LIGHTING: Xentry (mercedes benz): replacing exterior light bulbs. Exterior lights. Li did not match dtb from which it was created. (main remedy for repair was missing.) *pe
- LI-43-10 - SERVICE BRAKES, ELECTRIC: Mercedes benz (daimler): unsatisfactory brake servo assistance after a cold start, primarily when maneuvering. Low vacuum in the intake manifold due to wide open throttle valve. Retrofit electric brake booster vacuum pump (m56). Model 20
- LI03-20-P-048278 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Mercedes (xentry): engine makes noise, ticking/crackling at idle speeds up to approx. 1500 rpm. Run in effect of 1st crankshaft main bearing. Models 211, 219, 164, 251, 203, 204, 209, 221, 461 and 463. No model years listed. *pe
- SB-91-60-193 - AIR BAGS: Mercedes: airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset
- RB-2009060005 - ELECTRICAL SYSTEM:SOFTWARE: Mercedes benz service campaign: see document search button for owner letter. Software calibration number (scn) coding; engine control module. The vehicles fuel tank leak diagnosis system may have been inadvertently deactivated during a vi
- SB-2008120008 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes benz: models 203, 209, 211, 219,230, and 463; model years 2005-2007. Replace pilot bushing at electrohydraulic unit. Daimler ag has determined that on affected vehicles the transmission pilot bushing may leak. Dealer will repla
- SC-2007100004 - POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE): Mercedes: replace transfer case on affected vehicles optimized transfer cases will reduce vibrations when cornering or when parking. Models 203, 211, 220. *pe
- PB-42-30-103 - SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE: Mercedes vehicle: the anti-lock brake system (abs) return flow pump running without control with corresponding fault code C1401, clean and insulated the connector for the return flow pump relay. Models 202 and 208. Model years unknown.
- PB-91-60-53A - AIR BAGS: Mercedes vehicle: the srs indicator lamp is illuminated and code B1058 and b2dbo are stored, replace the srs control unit. Models 203 and model 209. Model years unknown. *pe
- PB-82-10-376F - EXTERIOR LIGHTING:HEADLIGHTS: Mercedes vehicles: the xenon or bi-xenon headlamp not functioning. A function description can be found in wis document gf8s.10-p-20010 (203), gf82.10-p-0003q (209); gf82.10-p-3002r (230). Model years uknown. *pe
- SB-2008070002 - ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS: Mercedes: replace v belt upper guide pulley. The v belt upper guide pulley optimized for noise reduction is available. The dealer will replace upper guide pulley at the next workshop visit. *pe
- 424586 - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: All model 171, 203 and 209 vehicles equipped with sales code 477 - tire loss warning system (indirect esp based) with run flat tires. [tire pressure monitoring inactive] displayed instrument cluster. Model year 2005-2007. *nj
- 2007100004 - POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE): Models e320, e500, e55, e350, e550, e63 and s430 4matic, s500 4matic. My 2005-2006 -- replace transfer case. *nj updated 5/13/09. Models c280, c350, c320 and c240. My 2005-2007. *pe
- 2007010010 - ENGINE AND ENGINE COOLING:ENGINE: Replace engine oil dipstick. *kb updated 10/18/07. *nj
- 2006110005 - UNKNOWN OR OTHER: Install software for navigation system. *kb updated 3/5/09. *pe
- 462046 - STEERING:RACK AND PINION: Play in the rack and pinion steering system. Models 203, 209, 210, 211, 215, 220, 230. Mercedes benz. *kb updated 5/13/09. *pe
- 470036 - FUEL SYSTEM, OTHER: Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. This may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or in
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20140325 |
Tl* the contact owns a 2007 mercedes benz c320. The contact stated that gasoline fumes were emitted into the vehicle. The contact inspected the vehicle and noticed that fuel was leaking from under the vehicle. The vehicle was taken to an independent mechanic where the technician diagnosed that the fuel pump and seal were defective and needed to be replaced. The manufacturer was made aware of the failure. The vehicle was repaired. The failure mileage was 55,600 and the current mileage was 55,610.
| No | No | N | None | None | 20130208 |
Tl* the contact owns a 2007 mercedes benz c230. The contact stated that while driving 55 mph the vehicle began to decelerate despite the contact applying pressure to the accelerator pedal. The vehicle was stopped, shut off and restarted. The vehicle then resumed normal operation. The failure recurred three times. The vehicle was taken to a dealer for diagnosis and the contact was informed that the transmission electrical plate internal speed sensor would need to be replaced, which would require the entire transmission being replaced. The manufacturer was notified but offered no assistance. The vehicle was not repaired. The failure and current mileage was 64,000.