Mercedes-benz Glc 2018

• Recall R/2020/243 [UK]: Engine control unit software to be updated
  Improve the vehicle emissions via software updates.
  update the relevant control unit?S software and if necessary replace the nox sensors.

  Show Content

• Recall R/2018/266 [UK]: To improve emissions of the affected vehicles.certain calibrations of functionalities must be changed in the engine management
  Improve the vehicle emissions via software updates.
  update the diesel engine control unit software and add a supplementary booklet for the operator's manual

  Show Content

• Recall R/2021/274 [UK]: Vehicles with a panoramic sunroof the polycarbonate panel may not have been bonded correctly during a prior service repair
  The polycarbonate panel located between the windshield and the panoramic sunroof may not have been bonded correctly during a prior service repair.
  remove the bonded panel and install a new polycarbonate panel if required.

  Show Content

• Recall R/2021/082 [UK]: The communication module may be deactivated
  The communication module may be deactivated
  carry out a check of the configuration of the communication module on affected vehicles and if necessary activate the communication module.

  Show Content

• Recall R/2021/121 [UK]: The connection of the gas lines of the inertisation system might not meet specifications
  The connection of the gas lines of the inertisation system might not meet specifications.
  check and if necessary rework the gas lines of the inertisation system.

  Show Content

• Recall R/2021/106 [UK]: The behaviour of the emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/129 [UK]: The emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/130 [UK]: The behaviour of the emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/133 [UK]: The emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2021/134 [UK]: The behaviour of the emergency call system might not meet specifications
  The behaviour of the emergency call system might not meet specifications.
  update the software of the communication module for the emergency call system.

  Show Content

• Recall R/2019/007 [UK]: The status of the front passenger airbags displayed in the centre console might not be indicated correctly
  The status of the front passenger airbags displayed in the centre console might not be indicated correctly.
  the affected vehicles head unit software will be updated

  Show Content

• Recall R/2020/236 [UK]: The emergency call system (ecall) does not meet the specification
  On affected vehicles the software of the communication module for the emergency call system does not meet the specification
  update the software of the communication module for the emergency call system

  Show Content

• Recall R/2021/083 [UK]: The software of certain communication modules may not meet specifications
  The software of certain communication modules may not meet specifications.
  carry out an update to the software of the communication module on affected vehicles.

  Show Content

• Recall R/2018/168 [UK]: Driver's airbag gas generator housing failure during deployment
  On affected vehicles it has been determined that drivers airbags with potentially faulty gas generator housing material may have been installed in vehicles of model series 156 176 246 205 238 & 253. If the material of the gas generator housing fails during airbag deployment in the event of a crash the airbag system would possibly no longer have a restraint effect. In addition separating parts could enter the passenger compartment. This could lead to an increased risk of injury.
  on affected vehicles replace the driver?S airbag

  Show Content

• Recall R/2019/043 [UK]: An internal sensor within the electric power steering unit may not have been manufactured to specifications
  An internal sensor within the electric power steering unit might not have been manufactured according to specifications.
  the affected vehicles are to have the steering unit replaced.

  Show Content

• Recall R/2019/372 [UK]: Certain front seat belt buckles may not have been manufactured according to specification
  A correctly fastened seat belt could be detected as not fastened impairing the restraint system
  check the relevant seat belt buckles in the affected vehicles and replace if necessary

  Show Content

• Recall R/2019/337 [UK]: The four locknuts securing the air bag might be missing
  Certain driver airbag modules might not be bolted onto the base plate.
  check the driver airbag on the affected vehicles and replace it if necessary.

  Show Content

• Recall R/2020/239 [UK]: The software of the esp control unit may not meet the specifications
  The software of the esp control unit might not meet the specifications.
  update the software for the esp control unit on the affected vehicles.

  Show Content

• Recall R/2020/225 [UK]: The data documenting the correct mounting of the turbocharger oil feed as well as the oil return line may be missing
  The hv battery pack can overheat and result in the venting of hot gas which can ignite vehicle components or in extreme cases the entire vehicle.
  to prevent a vehicle fire the vehicles should not be charged using the external charging cable and the vehicles should only be driven using the default auto ev mode only

  Show Content

• Recall R/2020/334 [UK]: The high voltage wiring harness shield may not permanently withstand the electrical loads that are induced under certain driving profiles
  The shield for the high-voltage wiring harness may not permanently withstand the electrical loads that are induced under certain driving profiles
  replace the high-voltage wiring harness on the affected vehicles

  Show Content

• Recall R/2021/027 [UK]: The screw connection of the power supply on the starter may not have been installed according to specification
  The screw connection of the power supply on the starter might not have been installed according to specification.
  check the screw connections of the starter on the affected vehicles and correct them if necessary.

  Show Content

• Recall 2021291 [Canada]: Visual system
  Issue: on certain vehicles, a software problem could cause the rearview camera image not to appear on the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety risk: a rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective actions: mercedes-benz will notify owners by mail and send a wireless over-the-air software update to each vehicle. If the update cannot be completed successfully, you will be notified to schedule an appointment to have the update performed by a dealer.

  Show Content

• Recall 2021170 [Canada]: Structure
  Issue: on certain vehicles, the plastic panel located between the windshield and the panoramic sunroof may not have been attached correctly during a prior service repair. Over time, the panel could loosen and separate from the vehicle. Safety risk: a panel that detaches from a moving vehicle could create a road hazard for others and increase the risk of a crash. Corrective actions: mercedes-benz will notify owners by mail and instruct you to take your vehicle to a dealer to replace the front roof panel.

  Show Content

• Recall 2021041 [Canada]: Accessories
  Issue: on certain vehicles, a software problem could cause the rearview camera image not to appear on the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety risk: a rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective actions: mercedes-benz will notify owners by mail and instruct you to take your vehicle to a dealer to update the head unit software.

  Show Content

• Recall 2020614 [Canada]: Electrical
  Issue: on certain vehicles, the power supply cable to the starter may have been attached incorrectly. As a result, the power cable could contact the starter housing. This can damage the cable, and could result in a short circuit. Safety risk: a short circuit could cause the vehicle to stall and create the risk of a fire. Corrective actions: mercedes-benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the cable connections to the starter and correct them, if necessary.

  Show Content

• Recall 2019554 [Canada]: Seats and restraints
  Issue: on certain vehicles, there may be a problem with the front seat belt buckles. This could cause the seat belt warnings to turn on, even if the front seat belts are buckled. If the driver ignores these warnings, the pre-safe and airbag systems may not function properly. Safety risk: a seat belt pretensioner or airbag system that does not work properly in a crash could increase the risk of injury. Corrective actions: mercedes-benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the front seat belt buckles and replace them if necessary.

  Show Content

• Recall 2018723 [Canada]: Airbag
  Certain amg glc 63 s vehicles may not comply with the requirements of canada motor vehicle safety standard (cmvss) 208 - occupant protection in frontal impacts. The airbag control unit software may not meet specifications, which could lead to delayed deployment of the passenger front airbag in certain crashes. This could increase the risk of injury to the front passenger. Correction: dealers will update airbag control unit software.

  Show Content

• Recall 2018656 [Canada]: Airbag
  On certain vehicles equipped with an audio 20 head unit and automatic child seat recognition, the status of the passenger airbag may not be displayed correctly. For example, the display may indicate that an airbag is turned off when it is not. This could create a situation where a child or small-statured occupant is inadvertently placed in front of an active airbag. This could increase the risk of injury in a crash. Correction: dealers will update the audio head unit software.

  Show Content

• Recall 2018541 [Canada]: Seats and restraints
  On certain vehicles, the seat belt latch plate in the second seating row outboard seats might retract into the area between the c-pillar paneling and the rear side paneling. This could hinder the access to the seat belt latch plate for the outboard seat occupants. If a rear seat passenger does not fasten the seat belt, the risk of injury in the event of a crash could increase. Correction: dealers will add a buffer element to the c-pillar paneling. Note: this is an expansion of recall 2018-136.

  Show Content

• Recall 2018491 [Canada]: Lights and instruments
  Certain vehicles equipped with led headlamps may not meet the requirements of canada motor vehicle safety standard (cmvss) 108 - lighting system and retroreflective devices. A production problem may cause the front turn signal lamps to produce pink or violet light, instead of amber, which is contrary to requirements of the standard. This could result in nearby road users being confused by the turn signal lamps flashing a different colour than normal, which could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will inspect the colour of the front turn signals, and replace the led module if necessary.

  Show Content

• Recall 2018160 [Canada]: Airbag
  Certain vehicles may have been equipped with driver airbag modules containing defective inflator housing material. This could cause the inflator housing to rupture in the event of an airbag deployment, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. Correction: dealers will replace the driver airbag.

  Show Content

• Recall 2018136 [Canada]: Seats and restraints
  On certain vehicles, the seat belt latch plate in the second seating row outboard seats might retract into the area between the c-pillar paneling and the rear side paneling. This could hinder the access to the seat belt latch plate for the outboard seat occupants. If a rear seat passenger does not fasten the seat belt, the risk of injury in the event of a crash could increase. Correction: dealers will add a buffer element to the c-pillar paneling.

  Show Content

• Recall 2017556 [Canada]: Accessories
  On certain vehicles, the panoramic sunroof frontal and side panels may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: dealers will inspect bonding and repair as necessary.

  Show Content

• Recall 2017490 [Canada]: Airbag
  On certain vehicles, electrostatic discharge, when combined with a broken clock spring and insufficient grounding of the steering components, could lead to an inadvertent deployment of the driver's frontal airbag. Unintended airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a crash causing injury and/or property damage. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: dealers will add sufficient grounding to the steering components. Note: a broken clock spring would result in a driver airbag warning message appearing in the instrument cluster, as well as a red airbag warning lamp illuminating.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

A few weeks after i bought my vehicle the brakes started squeaking. I mentioned this to one of the service people and she suggested it might be a small stone. It continued to squeak and then it started screeching. People in the parking lot and at home asked me if i was really driving a mercedes-benz. The brakes were changed eventually and the service gentleman said it wouldn't help as it would start again. True to his word. They are screeching again. It's embarrassing to say the least and it definitively hurts our ears. I have had 4 mb's and i have to say i have never had this problem. Shame on you!

Common OBD-II Error Codes

• P0339 [1] Crankshaft Position Sensor A Circuit Intermittent