2018 PETERBILT 325Peterbilt 325 2018

Vehicle Details: Investigations, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2018 PETERBILT 325, manufacturered by Peterbilt Motors Company.
The vehicle is described as a 6x4 Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.).

ManufacturerKnown WMI(s)Fuel Type
PETERBILT1NP 1XP 2NP 2XP 3BP 3WP Diesel
PETERBILT VIN Decoder

Use the box here to look up VINs from PETERBILT as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2018 PETERBILT 325 produced?
     - The 2018 PETERBILT 325 is produced in Denton Texas, United States (usa).
  • What is the GVWR of a 2018 PETERBILT 325?
     - The 2018 PETERBILT 325 has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
  • How much horsepower does the 2018 PETERBILT 325 have?
     - The 2018 PETERBILT 325 has 380 horsepower.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 45-064 - ENGINE AND ENGINE COOLING: Info only - paccar is introducing over-the-air (ota) software updates for engine my17 and newer chassis equipped with cummins x15, x12, isx12, isx12n, l9n, px-7, and px-9 engines the technology will leverage the existing remote diagnostic c
  • 13-060 - BRAKES (PWS): The service information for bendix air dryer maintenance is being updated to include new procedures.
  • 51-013 - EQUIPMENT: Due to major data carriers phasing out 3g networks, chassis currently utilizing first generation peoplenet mobile gateway (pmg001) will experience severe 3g service degradation as early as january of 2022. Chassis currently utilizing 3g ant
  • 43-071 - FUEL SYSTEM, DIESEL: Fix-as-fail a?? Due to undersupply issues, only a limited supply of diesel exhaust fluid (def) sensors are available. As a temporary solution, after paccar confirms a def sensor is not available, a temporary software update will allow a veh
  • 02-160 - VISIBILITY: Information only ⿿ windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 13-055 - SERVICE BRAKES, AIR: Fix as fail: peterbilt has introduced an improved mounting bracket for low mount air tanks for vehicles built between january 01, 2017 and july 06, 2020. Torsional vibration may stress the currently-installed brackets and cause them to fai
  • 13-054 - BRAKES (PWS): Fix-as-fail - bendix new-gen lightweight steer axle drum brake spider cracking
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-067 - STRUCTURE: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (⿿soc⿝) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
  • 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
  • 43-066 - STRUCTURE: Def tank covers may become loose and potentially crack on vehicles built before october 2019 with def tank part number m86-6221-003**(tank-def medium assy) and m86-6222-003**(tank-def large, assy). Resolution is to resolve the vibration on
  • 34-085 - ELECTRICAL SYSTEM: Information only a?? Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
  • 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • PB 13-050 - SERVICE BRAKES, AIR: Information: chassis built after 01/11/2016 with hydraulic brakes were provided with a jumper harness in the glove box or tool box that is required when programming the abs. If this harness is no longer in the vehicle, order from paccar pa
Known Recall Investigations
  • Quarter fender failures investigation # PE20015

    The office of defects investigation (odi) is opening this preliminary evaluation (pe) on model year (my) 2017 - 2019 peterbilt and kenworth vehicles equipped with quarter fenders. Odi has received reports with allegations of quarter fender failures resulting in road debris or collateral damage to the subject vehicle. Peterbilt and kenworth vehicles are highly customizable, with several options for fenders.Quarter fenders are approximately two feet by two feet square and can be made of either plastic or metal.N some events the plastic fenders have fractured leaving only the mounting tube. The separated pieces of plastic or metal fenders pose a safety risk to both the subject vehicle and other motorists and pedestrians who may be struck by the separated fender.Odi is aware of one (1) consumer complaint alleging multiple separations. One such separation reportedly damaged the air brake system. Odi is aware of additional fleet reports of quarter fender failures.During complainant interviews, odi learned that the alleged defect in the plastic fenders may be limited to a specific production period. Fleet interviews indicated that only factory equipment fenders fractured, and replacements performed better.A preliminary evaluation has been opened to determine the frequency and severity of this failure mechanism and understand the conditions that might influence this failure on the subject vehicles.The odi report cited above can be reviewed at: http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid using complaint identification number 11349017.

NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Additional Error TextUnused position(s): 8; The Model Year decoded for this VIN may be incorrect. If you know the Model year, please enter it and decode again to get more accurate information.
Body Cab TypeMDHD: COE (Cab Over Engine)
Body ClassTruck
DisplacementCC12900.0
DisplacementCI787.20629882204
DisplacementL12.9
Drive Type6x4
Engine ConfigurationIn-Line
Engine Cycles4
Engine Cylinders6
EngineHP380
EngineHP_to510
EngineKW283.3660
Engine ManufacturerPACCAR
Engine ModelMX/MX-13
Error Code3,14
Error Text3 - VIN corrected, error in one position (assuming Check Digit is correct); 14 - Unable to provide information for some of the characters in the VIN, based on the manufacturer submission.
Fuel Type PrimaryDiesel
GVWRClass 8: 33,001 lb and above (14,969 kg and above)
MakePETERBILT
MakeID495
ManufacturerPETERBILT MOTORS COMPANY
Manufacturer Id1033
Model325
ModelID2795
Model Year2018
NCSA Body TypeSingle-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.)
NCSA MakePeterbilt
NCSA ModelMedium/Heavy – Unknown engine location
Plant CityDENTON
Plant Company NamePeterbilt
Plant CountryUNITED STATES (USA)
Plant StateTEXAS
Possible Values(8:A)
SuggestedVIN1NPYLP9A4JD481288
VIN1NPYLP914JD481288
Vehicle Descriptor1NPYLP91*JD
Vehicle TypeINCOMPLETE VEHICLE
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
1NPYLP9V4JD4812882018325DENTON TEXAS, UNITED STATES (USA)
1XPYDP9X6JJ1866442018325 ,
1NPYLP914JD4812882018325DENTON TEXAS, UNITED STATES (USA)
1NPYLP9A4JD4812882018325DENTON TEXAS, UNITED STATES (USA)
1NPYLP9J4JD4812882018325DENTON TEXAS, UNITED STATES (USA)

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.