2014 PETERBILT 567Peterbilt 567 2014

Vehicle Details: Recalls, Investigations, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2014 PETERBILT 567, manufacturered by Peterbilt Motors Company.
The vehicle is described as a 6x4 Truck-tractor (Cab only, or with any number of trailing unit; any weight).

ManufacturerKnown WMI(s)Fuel Type
PETERBILT3BP 1XP 3WP Diesel
PETERBILT VIN Decoder

Use the box here to look up VINs from PETERBILT as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2014 PETERBILT 567 produced?
     - The 2014 PETERBILT 567 is produced in Denton Texas, United States (usa).
  • Are there recalls for the 2014 PETERBILT 567?
     - There are 18 recall(s) for the 2014 PETERBILT 567, additional information is below.
  • What is the GVWR of a 2014 PETERBILT 567?
     - The 2014 PETERBILT 567 has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
NHTSA Mandated Recalls
  • Recall 146602 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.

  • Recall 122894 [USA]: A short in the spotlight circuitry may increase the risk of a fire at the cab fuse block.

  • Recall 117974 [USA]: If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.

  • Recall 117240 [USA]: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (gvwr) load listed without experiencing tire failure which would increase the risk of a crash.

  • Recall 100872 [USA]: Without the transmission shifter being illuminated, the driver may not be able to easily identify what gear the vehicle is in, which could result in cause unintentional vehicle movement, increasing the risk of a crash.

  • Recall 101061 [USA]: If the door latch assembly becomes permanently locked while closed occupants could be prevented from exiting the vehicle in the event of a crash or fire, increasing the risk of injury.

  • Recall 96484 [USA]: Unintended engine startup could cause injury to a person working in the engine compartment. vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.

  • Recall 93372 [USA]: In the event of a crash, a frayed seat belt could cause the belt to separate from the seat, increasing the risk of injury to the seat occupant.

  • Recall 93708 [USA]: An unexpected loss of lighting during vehicle operation may reduce the driver's ability to see other vehicles, pedestrians, or objects, as well as reduce the truck's visibility to other drivers or pedestrians, increasing the risk of crash.

  • Recall 2020148 [Canada]: Lights and instruments

  • Recall 2017374 [Canada]: Electrical

  • Recall 2015317 [Canada]: Electrical

  • Recall 2015189 [Canada]: Electrical

  • Recall 2015095 [Canada]: Label

  • Recall 2014018 [Canada]: Other

  • Recall 2013178 [Canada]: Electrical

  • Recall 2013077 [Canada]: Seats and restraints

  • Recall 2013057 [Canada]: Lights and instruments

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 01-079 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: Fix-as-fail - hvac intermittently stops blowing cold air
  • 13-060 - BRAKES (PWS): The service information for bendix air dryer maintenance is being updated to include new procedures.
  • E271 - ENGINE AND ENGINE COOLING: An engine software update is required to resolve obd system readiness, def doser diagnostics, and otherobd system software related issues.
  • 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only ⿿ windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 32-018 - ENGINE AND ENGINE COOLING: Non-safety campaign a?? Chassis with the city horn option may generate unexpected alerts. A vecu software update is available to resolve the issue.
  • 32-017 - ELECTRICAL SYSTEM: Non-safety campaign a?? The batteries may drain quickly due to the vecu not going to sleep. Updated vecu software is available to resolve the issue.
  • 116-1 - EQUIPMENT: Smartnav 2.0 hardware retrofit for quality validation and vehicle validation units.
  • 01-079 - ELECTRICAL SYSTEM: Fix as fail the hvac system, on model 579 and 567 vehicles manufactured since 1/20/2012 may have inadequate temperature control. The hvac may intermittently stop blowing cold air, typically after a truck restart. Driver may notice the syst
  • 02-158 - STRUCTURE: Fix as fail: peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that co
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-067 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (a??Soca??) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
  • 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
  • 18PBB - EQUIPMENT ADAPTIVE/MOBILITY: Safety recall bulletin: updated with permanent repair path for phase 1 vehicles. The tractor abs lamp may not illuminate when abs controller loses battery and/or ignition power. Nhtsa recall number is 18v368. Non compliance to fmvss and
  • 20 PBC - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Safety recall interim bulletin: the tractor abs lamp may not illuminate when abs controller loses battery and/or ignition power. Nhtsa recall number is 20v199 non compliance to fmvss and cmvss 121 and 136. Resolution is to reflash softwa
  • 34-085 - ELECTRICAL SYSTEM: Information only a?? Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 34-086 - ELECTRICAL SYSTEM: Fix as fail: peterbilt has determined in model 567 and 579 vehicles built after 2011, the door harnesses may fail due to repeated door open and close cycles. Resolution is to replace the door harness with a more robust designed harness if
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 34-085 - VEHICLE SPEED CONTROL: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
  • 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
  • 01-078 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Fix as fail: peterbilt has determined that certain models 567 and 579 vehicles built after january 01, 2013 with an espar fuel fire heater and smartair may have an auto on/off malfunction at lower temperatures. User may experience lack of
  • 01-077 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Fix as fail: peterbilt has determined that model 567 and 579 vehicles built after january 01, 2013 and equipped with espar fuel fire heater and smartair may have temperature overshoot issue. User may experience higher sleeper interior temp
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • TIB43-062 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Information only ??A?A? This bulletin provides information about the california air resources board (carb) periodic smoke inspection program (psip) and heavy duty vehicle inspection program (hdvip).
  • 42-058 - ENGINE AND ENGINE COOLING: Fix-as-fail: two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
  • 01-073 - EQUIPMENT: Fix as fail hvac system may demonstrate inadequate temperature control, be stuck in defrost mode, or have intermittent changes in fan speed that can be remedied with an updated hvac software.
  • 34-066 - ELECTRICAL SYSTEM: Information only - quick reference guide for electric harness damage repairs.
  • 34-077 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Information only: proper instructions for closure of power distribution box cover to prevent corrosion.
  • 13-049 - ELECTRICAL SYSTEM:SOFTWARE: Information: bendix acom software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until bendix introduces new version.
  • 03-064 - ELECTRICAL SYSTEM: Information - recommended practices for updating esa software
  • 32-010 - ELECTRICAL SYSTEM: Information only - customer installed inverters may be wired incorrectly.
  • TT8136 - POWER TRAIN: Tip for technicians to avoid a conflict with the engine controller when re-programming the transmission
  • 7-17 - WHEELS: Fix-as-fail ? There is an updated plug to fix leaking steer axle hubcaps.
  • 817-1 - TRAILER HITCHES: Non safety campaign: the circuit for the trailer hotline/trailer power may not be properly protected on model 567/579 vehicles equipped with this option.
  • 15-16 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Fix-as-fail: repair for horizontal exhaust diffuser configurations with broken brackets or cracked diffuser.
  • 20-16 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Fix-as-fail: hvac panel and temperature mode doors are failing for certain 579 and 567 models.
  • 20-16 - EQUIPMENT:MECHANICAL: Fix-as-fail: peterbilt 567/579 hvac panel and temperature mode doors not functioning properly
  • 19-16 - ENGINE (PWS): Fix-as-fail: molded air intake pipe may crack allowing dust to intrude into engine. Procedure is provided for inspecting and replacing the air intake pipe.
  • 816-2 - EQUIPMENT:MECHANICAL: Non-safety campaign: replace the molded air intake pipe, which can crack and allow road debris into the engine. Debris entering through the intake may cause severe engine damage.
  • 18-16 - EQUIPMENT: Fix-as-fail: an internal issue may cause some hvac mode door actuators to fail. This will cause the hvac system to act erratically or constantly turn on and off.
  • 716-1 - POWER TRAIN:AXLE ASSEMBLY: Non-safety campaign: watson & chalin lift axle frame brackets with slotted lower mounting holes may exhibit cracking when fasteners are positioned at the upper portion of the slot. Installing a doubler plate may prevent cracks from developi
  • RN-714-1 - POWER TRAIN:MANUAL TRANSMISSION: Peterbilt: see document search button for owner letter. Certain trucks, at time of assembly, may not have a properly seated upper reverse idler feed tube (oil supply line), resulting in bearings having reduced oil pressure. *pe
  • SB-E-097 - ENGINE (PWS): Peterbilt: the malfunction indicator lamp (mil) illuminates due to an engine control unit (ecu) software issue, rear nox sensor, operating correctly. *pe
  • SB-114 - EQUIPMENT: Peterbilt: instruction information is being provided regarding the shipping of sleeper roof fairing (72" and 80"), with vehicle, from factory. Model 579, 567. No years listed. *pe
  • FRN-413-9 - LIGHTING (PWS): Peterbilt: see document search button for owner letter. While truck is moving, and exterior light switch is activated, will cause lights to go out and switch plug needs replacing and software updated. Models 567, 579. No model years li
Known Recall Investigations
  • Intermittent loss of power steering assist investigation # PE20006

    On may 1, 2020, the office of defects investigation (odi) opened pe20006 to investigate complaints of intermittent loss of power steering assist in daimler truck north america (dtna), volvo trucks of north america (volvo) and paccar vehicles equipped with a zf/trw (trw) thp60 steering gear.  the investigation focused on 2010-2020 dtna freightliner cascadia, m2 and wst; volvo vn, vah and vhd and paccar 337, 365, 389, 567, 579 model vehicles.Field reports and interviews with fleet drivers allege that high power steering fluid temperatures could result in internal seal and bearing failures causing pressure fluctuation, affecting left and right-hand turns.  the inability of the driver to steer the vehicle as intended can increase the risk of a crash and injury. Odi analyzed data provided by trw, dtna, volvo, and paccar in response to individual information request letters.Odi found that most failures occurred within the first two years and/or 50,000 miles of service.  the claim rate decreased with time and miles in service and remained less than 0.5%. Odi normalized data from each of the manufacturers and determined that there was not a substantial difference in the failures.Additionally, trw improved a seal in the steering gear in december 2015.Trucks built on or after 2016 (as 2017 and newer model years) show a decreasing trend of failures. In view of the overall low failure rate, the nature of early-life failure, and failure rate trending downward for model years 2017 and newer, this preliminary evaluation (pe) is closed.  the closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist.The agency reserves the right to take additional action if warranted by future circumstances. To review the odi reports cited in the closing resume odi report identification number document, go to nhtsa.Gov.

NHTSA decoded information from VIN

140 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Body Cab TypeMDHD: Conventional
Body ClassTruck-Tractor
Brake System TypeAir
DisplacementCC15000
DisplacementCI915.3561614209
DisplacementL15
Drive Type6x4
Engine ConfigurationIn-Line
Engine Cylinders6
Engine ManufacturerCummins
Engine ModelISX
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
GVWRClass 8: 33,001 lb and above (14,969 kg and above)
MakePETERBILT
MakeID495
ManufacturerPETERBILT MOTORS COMPANY
Manufacturer Id1033
Model567
ModelID2788
Model Year2014
NCSA Body TypeTruck-tractor (Cab only, or with any number of trailing unit; any weight)
NCSA MakePeterbilt
NCSA ModelMedium/Heavy - CBE
Plant CityDENTON
Plant Company NamePeterbilt
Plant CountryUNITED STATES (USA)
Plant StateTEXAS
VIN1XPCD40XXED251161
Vehicle Descriptor1XPCD40X*ED
Vehicle TypeTRUCK
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
1XPCDP9XXED2496422014567DENTON TEXAS, UNITED STATES (USA)
1XPCDP0X9ED2463562014567DENTON TEXAS, UNITED STATES (USA)
1XPCD40XXED2511612014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X5ED2496752014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X3ED2496882014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X7ED2496762014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X9ED2496802014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X4ED2496832014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X2ED2496822014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X8ED2496852014567DENTON TEXAS, UNITED STATES (USA)
1XPCPPEXXED2524422014567DENTON TEXAS, UNITED STATES (USA)
1NPCLP0X3ED2489732014567DENTON TEXAS, UNITED STATES (USA)
1XPCPPEXXED2524392014567DENTON TEXAS, UNITED STATES (USA)
1XPCD40X1ED2511622014567DENTON TEXAS, UNITED STATES (USA)
1XPCD40X8ED2511572014567DENTON TEXAS, UNITED STATES (USA)
1XPCDP0X1ED2469652014567DENTON TEXAS, UNITED STATES (USA)
1NPCXPEX5ED2466102014567DENTON TEXAS, UNITED STATES (USA)
1NPCLP0X7ED2471772014567DENTON TEXAS, UNITED STATES (USA)
1XPCD40X3ED2511632014567DENTON TEXAS, UNITED STATES (USA)
1NPCL40X3ED2352042014567DENTON TEXAS, UNITED STATES (USA)
1XPCD49X0ED2469432014567DENTON TEXAS, UNITED STATES (USA)
1XPCDP9X6ED2496402014567DENTON TEXAS, UNITED STATES (USA)
1NPCXPEX7ED2227622014567DENTON TEXAS, UNITED STATES (USA)
1XPCD40X2ED2511542014567DENTON TEXAS, UNITED STATES (USA)

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.