Temsa Ts-35c-ts-35e 2019

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 190374 [USA]: A fuel leak in the presence of an ignition source increases the risk of a fire.
    Temsa is recalling certain 2018-2021 ts35 and 2018-2020 ts45 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
    cummins will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owner notification letters were mailed on july 30, 2021. Owners may contact temsa customer service at 1-800-625-9319.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.

  • Recall 145885 [USA]: Delays in opening emergency exits can increase the risk of an injury in the event of an emergency.
    Temsa global sanayi ve ticaret a.S. (temsa) is recalling 2013-2020 certain ts35c, ts35e and ts45 buses. The instruction label of the emergency exit windows may be inadequate to clearly describe how to open the push out windows quickly. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 217, "bus emergency exits and window retention and release."
    temsa will notify owners, and dealers will inspect and replace the labels, as necessary, free of charge. The recall began october 16, 2019. Owners may contact temsa customer service at 1-407-271-8935.
    owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2023-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2023 for temsa.
  • TS35-FC-2105 - ELECTRICAL SYSTEM:STARTER ASSEMBLY: Explanation how the insulation layer are assembled into the battery lid to avoid the freezing of the relay in the vehicle
  • TS35-FC-2102 - FUEL SYSTEM, DIESEL: Ts35 fuel neck improvement
  • No comms 2021-01 - EQUIPMENT: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for january 2021 for temsa.
  • TS-C109 - POWER TRAIN: For ease of access to oil dipstick of the transmission, filling rod has been rerouted. Relocating transmission oil dipstick.
  • TS35E - EQUIPMENT: The lift
  • TEMSA GLOBAL-1 - EQUIPMENT: Temsa non exclusive authorised service center agreement
  • TEMSA GLOBAL - EQUIPMENT: This booklet is published for serila production vehicles refer to e-doc online to access the most up-to-date booklets by entering vehicle vin number.
  • Temsa Posta 25oc - EQUIPMENT:RECREATIONAL VEHICLE/TRAILER: Bathroom lock latch bolt
  • TS-35 9033-20Y - EQUIPMENT: Fire instructions: actions to be taken in the event of a fire.
  • TS-U111 - FUEL SYSTEM, GASOLINE: New flap is to be installed in fuel tank filler cap
  • TS-U107 - FUEL SYSTEM, GASOLINE: New flap is to be installed in fuel tank filler cap
  • TS-C105 - POWER TRAIN: Relocating transmission oil dipstick
  • RAS SYSTEM BLEED - STEERING: Following document shows how to set tag axle steering system cylinders and bleeding the tag axle steering system
  • Information Docu - POWER TRAIN:AUTOMATIC TRANSMISSION: Information document sheet.
  • TS-U111 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
  • TS-U107 - FUEL SYSTEM, GASOLINE: Preventing fuel leaking out
  • TS-C105 - POWER TRAIN: Relocating transmission oil dipstick.
  • RAS SYSTEM BLEED - STEERING: Instructions on how to set tag axle steering system cylinders and bleeding the axle steering system.
  • TS35E w Lift (1) - EQUIPMENT: Vehicle schematics
  • Temsa Authorised - EQUIPMENT: Temsa non exclusive authorised service center agreement
  • 9020-230Y - ELECTRICAL SYSTEM: Ts 35 epa13 wiring. Refer to section 6 and section for hardware pin-out of moki, zr32, multiplexers, and can lines. As the multiplex unites are controlled by special algorithm, in case needed, the latest vehicle program should be downloade

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.