23-016-13
Service Bulletin Details
Public Details for: 23-016-13
Summary to be provided on a future date.
Models from 2013
2013 CHRYSLER 300 |
2013 DODGE CHALLENGER |
2013 DODGE CHARGER |
Models from 2012
2012 CHRYSLER 300 |
2012 DODGE CHALLENGER |
2012 DODGE CHARGER |
Models from 2011
2011 CHRYSLER 300 |
2011 DODGE CHALLENGER |
2011 DODGE CHARGER |
NUMBER: GROUP: DATE: 23-016-13 Body April 20 , 2013 This bulletin is supplied es technical information only end is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmffted, In eny form or by any means, electronic, mechanical, photocopying, or otherwise, wfthout written permission of Chrysler Group LLC. SUBJECT: Driver And/Or Passenger Seat Fore/Aft Movement During Acceleration And/ Or Braking OVERVIEW: This bulletin involves replacing the power seat track drive block bolts on front driver and/or passenger seat. MODELS: 2011- 2013 (LC) Challenger 201 1- 2013 (LO) Charger 201 1- 2013 (LX) 300 NOTE: This bulletin applies to vehicles built prior to February 26, 2012 (MOH 0226XX) equipped with power driver and/or passenger seat (sales codes JPS, JPR, JPT). SYMPTOM/CONDITION: The customer may experience up to 1mm(1 /32") fore/aft movement of the driver and/or passenger seat during acceleration and/or braking. DIAGNOSIS: Sit in the suspect seat and subjectively evaluate the customer concern . If the customer complaint can be confirmed as fore/aft looseness or rough trave l during seat adjuster operation, perform the Repair Procedure . PARTS REQUIRED: Qty. Part No. Description 8 (AR) 68203613AA Bolt SPECIAL TOOLS/EQUIPMENT REQUIRED: ITorque Wrench REPAIR PROCEDURE: 1. Remove the suspect seat(s). Refer to the detailed procedures available in Oea lerConnect> TechCONNECT under: Service info> 23-Body> Seats, Front> SEAT, Front> Removal. -2- 23-016-13 NOTE: The seat(s) do not need to be fully removed fro m the vehicle to complete the repair. Lift seat so that the rear locating pins clear the body and lean seat back in vehicle. 2. Remove one of the drive block bolts (1) from the bottom of the seat frame at a time and remove the plastic spacer (2) from the old bolt and reinstall it on the new bolt p/n 68203613AA. 3. Reinstall the new bolt into the bottom of the seat frame (3) and tighten it to 15Nm( 11 ft/lbs.). Repeat for the remaining bolts and/or seat. Fig. 1 Replace Drive Block Bolts 1 • Drive Block Bolts (bottom of seat frame) 2 - Plastic Drive Block Spacer (transfer from old to new bolt) 3 - Seat Frame (view from bottom) 4. Re install th e suspect seat(s). Refer to the detailed procedures available in DealerConnect> TechCONN ECT under: Service info> 23-Body> Seats, Front> SEAT, Front> Installation. POLICY: Reimbursable within the provisions of the warranty. TIME ALLOWANCE: Labor Operation No: Description Amount 23-13-60-9A Replace Power Seat Track Drive Block Bolts (Drivers Seat Only) (1 - Semi-Skilled) 0.3 Hrs. 23-13-60-9B Replace Power Seat Track Drive Block Bolts (Both Front Seats) 0.5 Hrs. I -3- I(1 - Semi-Skilled) FAILURE CODE: lzz IService Action 23-016-13