REVISION 1-PC451

QUALITY ACTION
CAMPAIGN BULLETIN
2G Telematics Hardware Replacement
Client Satisfaction Initiative
Reference: PC451, PC452, PC454
Date: November 3, 2016
Attention: Retailer Principal, Sales, Parts and Service Managers
UPDATE November 3, 2016
The announcement from September 2, 2016 has been revised to include:
 The telematics upgrade for 2014-15 Q50 is now available. The procedure and part
information has been added to this announcement..
 Second page of Service Comm is not VIN specific, service personnel should check vehicle repair

history prior to offering clients an opportunity to upgrade
In lieu of repair history, TCU version can be checked on the information screen (see page 2)
Please discard previous versions of this announcement.
Affected Models/Years:
Affected
Retailer
Population:
Inventory:
Please discard earlier versions of this bulletin.
2013 M37, M56, JX35, QX56
2014-15 & certain 2016 Q70,
NA
NA
QX60, & QX80
2014-15 Q50
SERVICE COMM
Activation date:
Stop Sale
In Effect
September 2, 2016
NO
November 3,2016
***** Client Satisfaction Initiative Summary *****
On February 26, 2016 Infiniti announced that it was sending a reminder notification to clients affected
by AT&T’s planned discontinuation of the 2G cellular network. In June 2016, Infiniti communicated
instructions to retailers to update new vehicles in their inventory with 3G compatible telematics control
units.
At this time, Infiniti is beginning the process of making 3G compatible hardware available to owners of
affected vehicles as identified above. This upgrade may require an owner make a co-payment in order to
receive the 3G hardware update. Please refer to the chart provided on page 2 to determine if an owner
co-pay is required. This client satisfaction initiative includes both the hardware upgrade and a
complimentary one-year subscription to Infiniti Connection Plus telematics service; this does not apply to
PC454 (see page 2 for details).
Note: Vehicle eligibility will be viewed on the second page of Service Comm (except PC454). This activity
is not displayed on the main page of Service Comm because it is optional for clients to participate.
PC451, PC452, PC454 | Revision 1
***** What Retailers Should Do *****
1. Verify if vehicles are affected by this client satisfaction initiative using Service Comm I.D. PC451,
PC452, which can be found on the second page, or PC454 on the main page.
2. The PC451 and PC452 notice on page 2 of Service Comm is not VIN specific and does not disappear
after a vehicle has been upgraded. Service Consultants should verify if the vehicle is still eligible for an
upgrade before informing a client. Vehicles not equipped with NAVI are not eligible as they are not
equipped with TCUs.
Verify applicability using one of the following methods:
1. Check vehicle service history for previous repair (PC451, PC452, or PC454).
2. Check the TCU ID number on the vehicle information screen. If the TCU ID begins
with something other than 202**, it is a 3G TCU and does not require an update.
For the QX60, Q70, and QX80:
To identify if the vehicle has a 2G or a 3G TCU, complete the following steps
on the head unit:
1. Press the hard button labeled Setting/Info.
2. Press the “Others” soft button on the center display screen.
3. Press the “Infiniti Connection” soft button.
4. Press “Unit ID information”.
5. If TCUID starts with “ 2021-1” it is a 3G device.
6. If TCUID starts with “ 2021-0” it is a 2G device.
For the Q50:
To identify if the vehicle has a 2G or a 3G TCU, complete the following steps
on the head unit:
1. Press the soft (on-screen) button labeled Setting.
2. Press the “>” soft button on the center display screen.
3. Press the “In-Touch Services” soft button on the center display screen.
4. Press “Unit ID information”.
5. If TCUID starts with “ 2021-1” it is a 3G device
6. If TCUID starts with “ 2021-0” it is a 2G device
Note: As indicated above, TCU IDs that begin with something other than 202** are 3G TCUs and do
not require an update.
PC451, PC452, PC454 | Revision 1
3. If applicable, retailers should ensure clients are informed of this 3G upgrade option when bringing
their vehicle in for service and that clients understand a co-pay may be involved.
4. Retailers must obtain client approval in advance of the upgrade being performed. If client approves,
update the vehicle using the procedure included with this announcement.
M37, M56, JX35, QX56
MODEL YEAR
2013
Q50, Q70, QX60, QX80
2014
Q50, Q70, QX60, QX80
2015-2016*
MODEL
CO-PAY AMOUNT
PNC
$299
PC451
$149
$0
PC452
PC454**
*Only certain 2016 model year vehicles are affected (2016 Q50 are all equipped with 3G TCUs from
the factory)
** PC454 applies to new vehicle inventory service action released June 29, 2016
Please refer to the 3rd bullet (●) below for additional details

If a client elects to have a 3G compatible Telematics Control Unit installed, the retailer is
responsible for collecting the co-pay from the client

Upon completion of the installation of the 3G hardware, retailers will file a warranty claim for
the parts and labor

o
Retailers will initially be paid for the full amount of the claim
o
Infiniti will subsequently debit the retailers Non Vehicle Account for the amount of the
co-pay they collected from the client
o
Retailers will be able to view debits on their monthly Retailer Claims Status Reports
PC454 applies to vehicles that were subject to the retailer service action, but were retailed
before the update was performed. PC454 will display on the main page of Service Comm
o
These vehicles will not require a client co-pay nor will retailers receive a claims debit.
These owners will only receive a six (6) month Infiniti Connection Plus complimentary
trial upon installation of the 3G hardware; they will not receive the complimentary one
(1) year subscription to Infiniti Connection Plus telematics services included on PC451
& PC452.
o
Retailers should still acquire client approval to install the 3G compatible Telematics
Control Unit prior to performing the update
o
Retailers should continue to perform PC454 on applicable vehicles in their inventory
5. For PC451 and PC452, clients must confirm their participation in the complimentary one (1) year
Infiniti Connection Plus subscription on the Infiniti Owner Portal after installation of the 3G
compatible hardware. Please provide clients with a copy of the login instructions provided with this
announcement. If possible, retailers should assist clients with this process.
PC451, PC452, PC454 | Revision 1
***** Release Schedule *****

Parts


Infiniti provided an initial supply of non-Q50 parts to all retailers
o Parts began arriving on September 6, 2016
283B0-3JA5A is the part number being used for all vehicles, except Q50
283B0-3JA7A is used for Q50
o This parts are not restricted and can be ordered through normal
process
 There is no TSB for this upgrade
 Use the procedure included with this announcement after the FAQ
Infiniti began notifying owners of potentially affected vehicles in September, 2016
via U.S. Mail. Q50 Owners will begin being notified in November, 2016
Repair
Owner
Notification
***** Retailer’s Responsibility *****
It is the retailer’s responsibility to check SERVICE COMM using the appropriate Campaign I.D. for the
status on each vehicle falling within the range of this client satisfaction initiative which for any reason
enters the service department. If a VIN subject to this client satisfaction activity was part of a retailer
trade, the letter associated with that VIN should be forwarded to the appropriate retailer for upgrade
completion.
Frequently Asked Questions (FAQ):
Q.
What is the reason for this client satisfaction activity?
A.
AT&T will discontinue its 2G cellular network coverage on December 31, 2016. Like all
cellular-equipped devices designed to connect to the 2G cellular network, Infiniti models with
a 2G-compatible telematics control unit (TCU) will be unable to use or receive services from
that device after December 31, 2016. Without an upgrade to the TCU, Infiniti Connection™
features will not be available after that time and may be impacted prior to that date
depending upon AT&T’s proprietary decisions regarding discontinuing 2G network coverage.
Also, AT&T stopped accepting new enrollments on the 2G network on July 1, 2016. If an
affected vehicle has not had a hardware upgrade and was not enrolled in Infiniti Connection™
before June 30, 2016, then it will not have access to the available Infiniti Connection™
features, including Emergency Calling and Automatic Collision Notification, until the upgraded
hardware is installed.
Q:
What is 2G cellular network access?
A:
2G refers to “2nd Generation” digital cellular telephone technology; it is the name of a specific
network that mobile telephone equipment uses to provide connectivity.
Q.
Which vehicles have 2G compatible TCUs?
A.
The following models equipped with navigation have 2G-compatible TCUs:



2013 Infiniti M37/M56, JX35 and QX56
2014-15 Infiniti Q50
2014-15 and some 2016 Infiniti Q70, QX60 and QX80
PC451, PC452, PC454 | Revision 1
Q:
What happens if I do not replace the TCU?
A:
Once the 2G cellular network is discontinued, the TCU will no longer be able to access the
Infiniti Connection™ features, including Emergency Calling and Automatic Collision
Notification, without a hardware upgrade. New vehicles sold after June 30, 2016 will not be
able to be enrolled in the complimentary trial for Infiniti Connection™ until the hardware has
been upgraded to be compatible with the 3G cellular network.
Q:
Will the new TCU hardware work with the 4G cellular network?
A:
No. The new TCU hardware is designed to connect to the current AT&T 3G cellular network
technology.
Q.
Why is Infiniti using 3G technology rather than 4G?
A.
Infiniti has studied how to integrate newer technology into your vehicle and developed
solutions aimed at delivering a hardware update option with the least inconvenience to clients.
The 3G network is supported throughout the U.S. by AT&T. However, Infiniti has no control
over availability of any cellular network.
Q:
How much will the replacement TCU cost?
A.
Clients are asked to participate in the cost of the parts and labor to upgrade the TCU. The
client co-pay amount varies by model year and is listed in the chart below. Infiniti will cover
the balance of the upgrade cost and include a complimentary one (1) year subscription to
Infiniti Connection Plus telematics services (PC451 & PC452 only). PC454 will receive a
complimentary six (6) month trial to Infiniti Connection Plus telematics services. The Infiniti
Connection Plus telematics services subscription retail cost is $308/year.
MODEL
M37, M56, JX35, QX56
Q50, Q70, QX60, QX80
MODEL YEAR
2013
2014
CO-PAY AMOUNT
PNC
$299
PC451
$149
PC452
$0
PC454
*Only certain 2016 model year vehicles are affected (2016 Q50 are all equipped with 3G TCUs from
the factory)
Q50, Q70, QX60, QX80
2015-2016*
** PC454 applies to new vehicle inventory service action released June 29, 2016
Q:
A client has a 2G-equipped Infiniti and is enrolled in Infiniti Connection™. Why do they have to
pay for a replacement TCU (PC451 & PC452 only)?
A:
The discontinuation of the 2G cellular network is outside of Infiniti’s control. The Infiniti
Connection™ subscription agreement states that clients are responsible for any hardware
upgrades due to changes in telecommunication systems. However, Infiniti is including a
complimentary one (1) year subscription to Infiniti Connection Plus telematics service when an
owner elects to upgrade to a 3G compatible TCU. A one (1) year subscription to Infiniti
Connection Plus telematics service is currently valued at $308/year, which is more than the
owner co-pay for this client satisfaction initiative. The one (1) year subscription will be added
to any remaining time currently on an owner’s trial enrollment. If the client already has a paid
PC451, PC452, PC454 | Revision 1
subscription on their 2G equipped vehicle, the current subscription will be cancelled and a prorated refund will be sent to the owner after the new 3G compatible TCU upgrade is
completed.
Q:
Will the SOS button in the vehicle still work?
A:
If an owner of an affected vehicle enrolled in an Infiniti Connection service trial or subscription
prior to June 30, 2016, then the SOS button in the vehicle will work through the service trial
or subscription period as long as the vehicle’s telematics hardware is connected to the cellular
network. If an owner of an affected vehicle did not enroll in an Infiniti Connection™ service
trial or subscription prior to July 1, 2016, then the SOS button in the vehicle will not function
until the TCU is upgraded.
Q:
Will my vehicle's navigation system feature be affected by the discontinuation of the 2G
cellular network?
A:
No. If your vehicle is equipped with an Infiniti Navigation system, the navigation system is
unaffected by the discontinuation of AT&T's 2G cellular network.
Q.
What will be the service department action?
A.
If an owner elects to upgrade to a 3G compatible TCU and agrees to pay the applicable copay, the retailer’s service department should install the 3G hardware using the procedure
accompanying this announcement (see instructions after FAQ).
Q.
How long will the upgrade take?
A.
The upgrade will typically take under two (2) hours to complete.
Q.
When will vehicle owners be notified?
A.
Infiniti began notifying owners of potentially affected vehicles in September, 2016 via U.S.
Mail. Affected Q50 owners will be notified in November, 2016 via U.S. Mail. Owners may
contact Infiniti Owner Services at 855-444-7244 to verify if their vehicle is affected by this
issue.
Q.
Are parts readily available?
A.
Yes. Parts were automatically shipped to retailers and began arriving on September 6, 2016.
Q50 Owners will begin being notified in November, 2016. Retailers can order parts as needed
through the normal process; parts are not restricted.
Q.
Will a courtesy vehicle be provided while the retailer is servicing the vehicle?
A.
Infiniti may provide a courtesy vehicle for the client to use while their vehicle is being serviced.
Courtesy vehicles are subject to availability and not guaranteed. Please check with your
retailer for availability and further details.
PC451, PC452, PC454 | Revision 1
Q.
Will I have to take my vehicle back to the selling retailer to have this service performed?
A.
No, any authorized Infiniti retailer is able to perform this service.
For Consumer Affairs: Please inform us of the retailer where you would like to have the
upgrade completed.
Q.
Does this issue affect any other Infiniti (or Nissan) models?
A.
Model year 2011-2015 Nissan LEAF vehicles are also affected.
Q.
I did not receive a letter. How can I tell if my vehicle is affected?
A.
Please provide your vehicle identification number (VIN) to the retailer so that the retailer can
check if your vehicle is included in this campaign. Clients may also contact Infiniti Owner
Services at 855-444-7244 to verify if their vehicle is affected by this issue.
Retailer Service Questions:
Q.
What does Sirius XM need in order to complete a TCU Swap?
A.
The retailer should have the original (old) IMEI number, VIN, and the new TCU IMEI number
available when calling to activate the new TCU. Retailers will also need to have the model,
model year, sales country (i.e. USA), and marketing color name of the vehicle available.
Q.
Does an owner need to do anything after the TCU is swapped?
A.
Owner instructions are provided after these FAQ and before the technician procedure.
Owners must follow these instructions to confirm their participation in the complimentary trial
for Infiniti Connection Plus telematics service. If possible, we recommend retailers assist
clients with completing this confirmation process. The instructions are on their own page, so
they can be printed for the client to take with them for completion at a later time. Infiniti
Connection Plus telematics service will not begin until the confirmation process has been
completed.
Q.
Is it possible to identify if a vehicle has a 2G or 3G TCU without removing the TCU?
A.
For the QX60, Q70, and QX80:
To identify if the vehicle has a 2G or a 3G TCU, complete the following steps on the head
unit. If the TCU ID begins with something other than 202**, it is a 3G TCU and does not
require an update.
1.
2.
3.
4.
5.
6.
Press the hard button labeled Setting/Info.
Press the “Others” soft button on the center display screen.
Press the “Infiniti Connection” soft button.
Press “Unit ID information”.
If TCUID starts with “ 2021-1” it is a 3G device.
If TCUID starts with “ 2021-0” it is a 2G device.
PC451, PC452, PC454 | Revision 1
For the Q50:
To identify if the vehicle has a 2G or a 3G TCU, complete the following steps on the head
unit:
1. Press the soft (on-screen) button labeled Setting.
2. Press the “>” soft button on the center display screen.
3. Press the “In-Touch Services” soft button on the center display screen.
4. Press “Unit ID information”.
5. If TCUID starts with “ 2021-1” it is a 3G device
6. If TCUID starts with “ 2021-0” it is a 2G device
Note: As indicated above, TCU IDs that begin with something other than 202** are 3G TCUs
and do not require an update.
Q.
What if the 2G or 3G TCU part is missing the IMEI (International Mobile Equipment Identity)
number that is used to identify the TCU?
A.
The IMEI number can be found on the label adhered to the TCU part. If this label is missing or
is not legible, you can use the SIM ID/ICCID instead. The SIM ID/ICCID is located on the
head unit “Unit ID” screen, you can locate this screen by following the steps in the question
above. You will need to locate this number prior to calling the SiriusXM agent to deactivate
the 2G TCU and activate the 3G TCU.
Retailers will also need to have the model, model year, sales country (i.e. USA), marketing
color name of the vehicle and VIN available.
Q.
Is there a matrix for which vehicles are equipped with TCUs?
A.
Model
TCU Type by Model Year
2013
2014
2015
2016
2017
Q50
N/A
2G
2G
3G
3G
Q60
N/A
N/A
N/A
N/A
3G
M/Q70
2G
2G
2G
2G/3G
3G
QX30
N/A
N/A
N/A
N/A
3G
JX35/QX60
2G
2G
2G
2G/3G
3G
QX56/QX80
2G
2G
2G
2G/3G
3G
Q.
Who can I call with Telematics system specific questions?
A.
Contact the Infiniti Connection / Infiniti InTouch Services call center @ 855-444-7244. The
call center is operational between 8AM-12AM EST Monday through Saturday.
Q.
Can the 283B0-3JA5A part number be used on all Infiniti models?
A.
No. The 283B0-3JA5A part number can only be used on:
 2013 Infiniti M37/M56, JX35 and QX56
 2014-2016 Infiniti Q70, QX60 and QX80
PC451, PC452, PC454 | Revision 1
Q.
Which part should be used on Q50 models?
A.
The 283B0-3JA7A part number can only be used.
Q.
May a retailer offer retailer paid goodwill to cover the cost of a client’s co-pay for this
upgrade?
A.
The retailer is responsible for collecting the copay from an owner electing to upgrade to a 3G
compatible TCU and may choose to not collect co-pays as service to their clients. Infiniti will
debit a retailers non-vehicle account for each claim submitted when a co-pay applies.
Q.
Will Infiniti cover an owner’s co-pay using factory goodwill?
A.
No. Factory goodwill will not cover a co-pay for owner’s electing to upgrade to a 3G
compatible TCU.
Login instructions for the Infiniti Owner portal & installation
instructions follow.




M37, M56, & Q70 – pages 11 – 22
JX35 & QX60 – pages 23 – 48
QX56 & QX80 – pages 49 – 61
Q50 – pages 62 - 81
PC451, PC452, PC454 | Revision 1
Infiniti Owner Portal Login and Infiniti Connection Subscription Confirmation
Instructions:
Owners must follow these instructions to confirm their participation in the complimentary trial for
Infiniti Connection Plus telematics service.
1.
Log onto the Infiniti Owner Portal, if not already enrolled, the client will need to create an
account and add their vehicle to their personal garage, then click on the Infiniti Connection
button.
2. The client will be directed to the Infiniti Connection web portal where they should click the
“Enroll Now” button.
3. The primary subscriber tab will open and be pre-populated if the client was previously enrolled
in Infiniti Connection, otherwise, the client will need to enter their information and click “Next”.
4. The Package Selection page will appear where the complimentary 12-month Infiniti
Connection Plus package information will be pre-populated. No credit card is required to
continue, but the client may elect to automatically renew after the complimentary subscription
by providing payment information, then click “Next”.
5. The client will be presented with their selection summary and asked to confirm the Terms &
Conditions of participation. This will complete the confirmation and services will be active.
6. If the client has not already done so, assist the client in downloading the Infiniti Connection
companion app from either the App Store or Google Play.
7.
For assistance with this process, you and your clients can contact Infiniti Owner Services at 1855-444-7244.
PC451, PC452, PC454 | Revision 1
M37, M56, & Q70 Telematics Control Unit Replacement
IMPORTANT: Those steps in RED below, under Campaign Overview, MUST be performed in the
order listed for the new TCU to operate correctly.
Campaign Overview:
1. Turn OFF the original TCU using CONSULT-III plus (C-III plus) (page 2).
2. Save the VIN DATA using C-III plus (page 7).
3. Remove the original TCU from the vehicle (page 8).
4. Deactivate (unregister) the original TCU by calling INFINITI CONNECTION™ Call Center (page 9).
5. Activate (register) the replacement TCU by calling INFINITI CONNECTION™ Call Center (page 9).
6. Install the replacement TCU in the vehicle (page 10).
7. Turn ON the replacement TCU using C-III plus (page 10).
8. Write the VIN DATA using C-III plus (page 10).
1/12
SERVICE PROCEDURE
Turn OFF the TCU
1. Connect the C-III plus VI to the vehicle.
2. Set the parking brake.
3. Turn the Ignition ON, but do not start the vehicle.
4. Launch C-III plus on the CONSULT PC.
5. Select Diagnosis (One System).
Step
5
Figure 1
2/12
6. Select TELEMATICS on page 2 of the “All systems” list.
Step
6
Figure 2
7. Select Work support.
Step
7
Figure 3
3/12
8. Select TCU ACTIVATE SETTING.
9. Select Start.
Step
8
Step
9
Figure 4
10. Select Start.
Step
10
Figure 5
4/12
11. Select Off to turn OFF the TCU.
12. Select End.
Step
11
Step
12
Figure 6
13. Select Start.
Step
13
Figure 7
5/12
14. Select Start.
Step
14
Figure 8
15. Confirm “Off” is displayed in the Current status field.
Step
15
Figure 9
6/12
Save VIN Data
1. Select SAVE VIN DATA.
2. Select Start.
Step
1
Step
2
Figure 10
3. Select Start.
Step
3
Figure 11
7/12
4. Select End.
Step
4
Figure 12
Remove the TCU from the Vehicle.
1. Remove the instrument lower cover.
a. Pull downward and disengage fixing pawl and
metal clips.
b. Pull back instrument lower cover.
c. Disconnect foot lamp RH harness connector
and TCU harness connector.
Figure 13
2. Remove the mounting screw and disconnect the
connector, and then remove them together with
the bracket from instrument lower cover.
3. Remove the bracket mounting screw and remove
the bracket from TCU.
Figure 14
8/12
Deactivate the Old TCU and then Activate the new TCU
IMPORTANT: Steps 1 and 2 below must be performed AFTER the original TCU is removed from the vehicle
and BEFORE the replacement TCU is installed.
1. Collect and have ready the following information:
 VIN.
 International Mobile Equipment Identity Number (IMEI) of the original TCU. This
number is located on the TCU.
 IMEI Number of the replacement TCU. This number is located on the TCU.
 Serial Number of the replacement TCU. This number is located on the TCU.
LABEL ON TCU
Figure 15
2. Call the INFINITI CONNECTION™ Call Center at 1-800-334-7858, press “1” and listen for additional applicable
INFINITI retailer prompts to replace a TCU. (Hours of operation are listed at the bottom of the page.)
NOTE: The phone number shown above is for TCU activation and deactivation ONLY. The Support Center
agent is unable to assist with matters unrelated to TCU activation and deactivation.
During this call:
 You will be asked for your name, dealership name, and all of the information collected in step 1.
 The Support Center agent will deactivate the original TCU and activate the replacement TCU.
IMPORTANT: Step 2 MUST be performed to activate the replacement TCU. If it is not performed the TCU will not
be able to communicate with the Infiniti Connection Global Data Center.
Infiniti Connection Call Center – Hours of Operation (Central Time Zone)
Monday – Friday: 7AM – 10PM
Saturday: 8AM – 5PM
Special Holiday Hours:
Closed Thanksgiving, Christmas, and New Years Day
Christmas Eve: 7AM – 7PM
New Years Eve: 7AM – 7PM
9/12
Install Replacement TCU

Perform steps 1-3 of Remove the TCU from the Vehicle procedure on page 8, in reverse order, to install.
Turn TCU ON

Perform steps 1-15 of Turn OFF the TCU procedure, starting on page 2, to turn the TCU ON and then
confirm the Current status field shows “On”.
Write VIN Data
1. Select WRITE VIN (SAVED DATA).
2. Select Start.
Step
1
Step
2
Figure 16
10/12
3. Select Start.
Step
3
Figure 17
4. Select End.
Step
4
Figure 18
IMPORTANT:
 Wait at least 2 minutes after the ignition is turned ON before checking for DTCs. If DTCs are checked prior
to this a U1000 may be stored.
 After writing VIN to new TCU, confirm SOS light on overhead console is illuminated solid.
11/12
PARTS INFORMATION
Description
Telematics Control Unit
PART NUMBER
283B0-3JA5A
Quantity
1
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the following claims coding:
CAMPAIGN (“CM”) ID
DESCRIPTION
Replace Telematics Control Unit
PC451
($299 Co-Pay)
OP CODE
FRT
PC4511
0.6 hrs.
PC452
Replace Telematics Control Unit
($149 Co-Pay)
PC4521
0.6 hrs.
PC454
Replace Telematics Control Unit
(Dealer Action Unit – No Co-Pay)
PC4541
0.6 hrs.
12/12
JX35 & QX60 Telematics Control Unit Replacement
IMPORTANT: Those steps in RED below, under Campaign Overview, MUST be performed in
the order listed for the new TCU to operate correctly.
Campaign Overview:
1. Turn OFF the original TCU using CONSULT-III plus (C-III plus) (page 2).
2. Save the VIN DATA using C-III plus (page 7).
3. Remove the original TCU from the vehicle (page 9).
4. Deactivate (unregister) the original TCU by calling INFINITI CONNECTION™ Call Center (page 23).
5. Activate (register) the replacement TCU by calling INFINITI CONNECTION™ Call Center (page 23).
6. Install the replacement TCU into the vehicle (page 24).
7. Turn ON the replacement TCU using C-III plus (page 24).
8. Write the VIN DATA using C-III plus (page 24).
1/26
SERVICE PROCEDURE
Turn OFF the TCU
1. Connect the C-III plus VI to the vehicle.
2. Set the parking brake.
3. Turn the Ignition ON, but do not start the vehicle.
4. Launch C-III plus on the CONSULT PC.
5. Select Diagnosis (One System).
Step
5
Figure 1
2/26
6. Select TELEMATICS on page 2 of the “All systems” list.
Step
6
Figure 2
7. Select Work support.
Step
7
Figure 3
3/26
8. Select TCU ACTIVATE SETTING.
9. Select Start.
Step
8
Step
9
Figure 4
10. Select Start.
Step
10
Figure 5
4/26
11. Select Off to turn OFF the TCU.
12. Select End.
Step
11
Step
12
Figure 6
13. Select Start.
Step
13
Figure 7
5/26
14. Select Start.
Step
14
Figure 8
15. Confirm “Off” is displayed in the Current status field.
Step
15
Figure 9
6/26
Save VIN Data
1. Select SAVE VIN DATA.
2. Select Start.
Step
1
Step
2
Figure 10
3. Select Start.
Step
3
Figure 11
7/26
4. Select End.
Step
4
Figure 12
8/26
Remove the TCU from the Vehicle.
1. Remove both left and right center console upper
side finishers.
Center console
upper side finisher
NOTE: Driver side shown In Figure 13 and 14.
Passenger side similar.
Figure 13
2. Confirm that the metal clips for the left and right upper center console side finisher are in place.

If the clips were detached, remove them from the center console and reattach to the upper center
console side finishers.
Metal clips
Figure 14
9/26
Center console
side finisher
3. Remove both center console side finishers.
NOTE: Driver side shown in Figure 15.
Figure 15
4. Confirm that the plastic clips for the left and right center console side finisher are in place.

If the clips were detached, remove them from the center console and reattach to the center console
side finishers.
Driver side
Plastic clip
Plastic clip
Passenger side
Figure 16
10/26
Shift knob
5. Remove the shift knob:
Figure 17
Retaining clip
a. Pull shift boot collar down (Figure 18).
b. Remove retaining clip (Figure 18).
Shift boot
collar
Figure 18
Retaining clip
c. Replace retaining clip back onto shift knob
(Figure 19).
Figure 19
11/26
6.
Remove the left and right side screws that retain the shift selector finisher.

Four on driver’s side (Figure 20).

Five on Passenger side (Figure 21).
Shift selector finisher
Driver side screws
Passenger side screws
Figure 20
Figure 21
Front console tray
7. Remove one retaining screw and then unclip the
front console tray from the center console
(Figure 22).
Retaining screw
Figure 22
8. Disconnect the harness connector from the 12 volt
power receptacle (Figure 23).

Leave harness attached to the center console.
Harness connector
Figure 23
12/26
9. Remove the shift selector finisher:
a. Place a clean shop towel over the front of the
shift selector finisher (Figure 24).
Figure 24
b. Lift the shift selector finisher at the rear.
c. While lifting the shift selector finisher,
disconnect the four harness connectors
exposed at the rear of the center console
(Figure 25).
Harness connectors
d. Separate the shift selector finisher from the
center console.
Figure 25
13/26
10. Remove the center console rear finisher:

Six hidden clips (Figure 26).
Center console rear
finisher
Figure 26
Center console
rear finisher
Center console lid
a. Lift center console lid.
b. Release six clips by gently pulling at the top of
the center console rear finisher toward the
rear of the vehicle.
Figure 27
c. Lay the center console rear finisher on the
vehicle floor.
d. Disconnect the two attached harnesses
connectors (Figure 28).
Center console
rear finisher
14/26
Figure 28
11. Remove the two mounting screws at the bottom rear of the center console (Figure 29).

Driver’s side shown. Passenger side similar.
Screw
Figure 29
12. Remove one mounting screw from the driver’s side and one from the passenger side of the center console
(Figure 30)
Driver side screw
Passenger side screw
Figure 30
13. Remove the two screws to the left of the shifter.
Screws
Figure 31
15/26
14. Disconnect the harness connectors on the
passenger side center console.

Do not unclip harnesses from center console.
Harness connector
locations (three shown).
NOTE: There may be three or four connectors
depending on the vehicle options.
Figure 32
15. Unclip the harness from the shift selector assembly (Figure 33).
Figure 33
Step
16b
16. Remove the center console (Figure 34).
a. Gently lift up,
b. and then rearward.
Step
16a
Figure 34
16/26
17. Remove the four nuts that attach the shift selector assembly to the center console brace (Figure 35).
NOTE: Top left nut is hidden in Figure 35.
 Reassembly torque to: 7 N•m (0.7 kg-m, 62 in-lb.)
18. Unclip the two harness clips shown in Figure 34 attached to the center console brace.
Shift selector
assembly
Nuts
Harness clips
Figure 35
Harness clips
19. Unclip the three harness clips from the center
console brace shown in Figure 36.
Shift selector
assembly
Figure 36
17/26
Shift selector
assembly
20. Lift the shift selector assembly away from the
center console brace and lay it on the driver’s side
floor (Figure 37).
Figure 37
21. Unclip the two harness connectors shown in
Figure 38 from the driver’s side of the center
console brace.
Harness clips
Figure 38
22. Unplug the two harness connectors that were
unclipped in step 21 and shown in Figure 39.
Harness
connectors
Figure 39
18/26
Around view
monitor control unit
Top screw
(not shown)
23. Remove the around view monitor control unit from
the center console brace (Figure 40).
a. Disconnect the harness connectors from the
around view monitor control unit.
Bottom
screws
b. Remove one top screw (not shown) and two
bottom screws.
Harness
connectors
Figure 40
24. Remove the two bolts and one nut on the driver’s side of the center console brace.
 Reassembly torque to: 7 N•m (0.7 kg-m, 62 in-lb.)
Nut
Bolts
Figure 41
25. Remove the two bolts and one plastic clip on the passenger side of the center console brace.
 Reassembly torque to: 7 N•m (0.7 kg-m, 62 in-lb.)
Plastic clip
Bolts
Figure 42
19/26
26. Lift the center console brace up at the rear and
then remove.
CAUTION: The center console brace may have
some sharp edges. Use care when removing it.
Center console
brace
Figure 43
Adapter duct
27. Push the adapter duct forward to detach from the
rear blower unit assembly and then remove.
Figure 44
20/26
Rear blower
unit assembly
28. Unbolt the 3 bolts that retain the rear blower
unit assembly (Figure 45) and then move it to
gain access to the “Telematics Control Unit”
(TCU).
Bolts
NOTE: Do not disconnect harnesses to the
rear blower unit assembly.

Reassembly torque to:
7 N•m (0.7 kg-m, 62 in-lb.)
Figure 45
29. Disconnect the three harness connectors from the TCU (Figure 46).
30. Unclip the antenna support clip from the TCU bracket (Figure 46).
31. Unbolt the four bolts that attach the TCU to the vehicle floor (Figure 46)


One bolt hidden in Figure 46.
Reassembly torque to: 10.1 N•m (1.0 kg-m, 7 ft-lb.)
Step 29
TCU
Step 30
Step 29
Step 31
Figure 46
21/26
32. Transfer the brackets from the old TCU to the new one.
a. Remove the two bolts that attach the front and rear TCU brackets; four total (Figure 47).
b. Transfer the brackets to the new TCU and install bolts.
 Reassembly torque to: 5.5 N•m (o.56 kg-m, 49 in-lb.)
Bolts
Bolts
Front TCU bracket
Rear TCU bracket
Figure 47
22/26
Deactivate the Old TCU and then Activate the new TCU
IMPORTANT: Steps 1 and 2 below must be performed AFTER the original TCU is removed from the
vehicle and BEFORE the replacement TCU is installed.
1. Collect and have ready the following information:
 VIN.
 International Mobile Equipment Identity Number (IMEI) of the original TCU. This
number is located on the TCU.
 IMEI Number of the replacement TCU. This number is located on the TCU.
 Serial Number of the replacement TCU. This number is located on the TCU.
LABEL ON TCU
Figure 15
2. Call the INFINITI CONNECTION™ Call Center at 1-800-334-7858, press “1” and listen for additional
applicable INFINITI retailer prompts to replace a TCU. (Hours of operation are listed at the bottom of the
page.)
NOTE: The phone number shown above is for TCU activation and deactivation ONLY. The Support Center
agent is unable to assist with matters unrelated to TCU activation and deactivation.
During this call:
 You will be asked for your name, dealership name, and all of the information collected in step 1.
 The Support Center agent will deactivate the original TCU and activate the replacement TCU.
IMPORTANT: Step 2 MUST be performed to activate the replacement TCU. If it is not performed the TCU will
not be able to communicate with the Infiniti Connection Global Data Center.
Infiniti Connection Call Center – Hours of Operation (Central Time Zone)
Monday – Friday: 7AM – 10PM
Saturday: 8AM – 5PM
Special Holiday Hours:
Closed Thanksgiving, Christmas, and New Years Day
Christmas Eve: 7AM – 7PM
New Years Eve: 7AM – 7PM
23/26
Install Replacement TCU

Perform steps 1-32 of Remove the TCU from the Vehicle procedure on page 9, in reverse order, to
install.
Turn TCU ON

Perform steps 1-15 of Turn OFF the TCU procedure, starting on page 2, to turn the TCU ON and then
confirm the Current status field shows “On”.
Write VIN Data
1. Select WRITE VIN (SAVED DATA).
2. Select Start.
Step
1
Step
2
Figure 49
24/26
3. Select Start.
Step
3
Figure 50
4. Select End.
Step
4
Figure 51
IMPORTANT:
 Wait at least 2 minutes after the ignition is turned ON before checking for DTCs. If DTCs are checked
prior to this a U1000 may be stored.
 After writing VIN to new TCU, confirm SOS light on overhead console is illuminated solid.
25/26
PARTS INFORMATION
Description
Telematics Control Unit
PART NUMBER
283B0-3JA5A
Quantity
1
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the following claims coding:
CAMPAIGN (“CM”) ID
DESCRIPTION
Replace Telematics Control Unit
PC451
($299 Co-Pay)
OP CODE
FRT
PC4512
1.1 hrs.
PC452
Replace Telematics Control Unit
($149 Co-Pay)
PC4522
1.1 hrs.
PC454
Replace Telematics Control Unit
(Dealer Action Unit – No Co-Pay)
PC4542
1.1 hrs.
26/26
QX56 & QX80 Telematics Control Unit Replacement
IMPORTANT: Those steps in RED below, under Campaign Overview, MUST be performed in
the order listed for the new TCU to operate correctly.
Campaign Overview:
1. Turn OFF the original TCU using CONSULT-III plus (C-III plus) (Page 2).
2. Save the VIN DATA using C-III plus (Page 7).
3. Remove the original TCU from the vehicle (Page 8).
4. Deactivate (unregister) the original TCU by calling INFINITI CONNECTION™ Call Center (Page 10).
5. Activate (register) the replacement TCU by calling INFINITI CONNECTION™ Call Center (Page 10).
6. Install the replacement TCU in the vehicle (Page 11).
7. Turn ON the replacement TCU using C-III plus (Page 11).
8. Write the VIN DATA using C-III plus (Page 11).
1/13
SERVICE PROCEDURE
Turn OFF the TCU
1. Connect the C-III plus VI to the vehicle.
2. Set the parking brake.
3. Turn the Ignition ON, but do not start the vehicle.
4. Launch C-III plus on the CONSULT PC.
5. Select Diagnosis (One System).
Step
5
Figure 1
2/13
6. Select TELEMATICS on page 2 of the “All systems” list.
Step
6
Figure 2
7. Select Work support.
Step
7
Figure 3
3/13
8. Select TCU ACTIVATE SETTING.
9. Select Start.
Step
8
Step
9
Figure 4
10. Select Start.
Step
10
Figure 5
4/13
11. Select Off to turn OFF the TCU.
12. Select End.
Step
11
Step
12
Figure 6
13. Select Start.
Step
13
Figure 7
5/13
14. Select Start.
Step
14
Figure 8
15. Confirm “Off” is displayed in the Current status field.
Step
15
Figure 9
6/13
Save VIN Data
1. Select SAVE VIN DATA.
2. Select Start.
Step
1
Step
2
Figure 10
3. Select Start.
Step
3
Figure 11
7/13
4. Select End.
Step
4
Figure 12
Remove the TCU from the Vehicle.
1. Remove instrument lower cover.
a. Pull disengaged pawls downward.
b. Pull back instrument lower cover.
c. Disconnect harness connectors.
Figure 13
8/13
2. Remove glove box assembly.
a. Remove glove box assembly fixing screws (A).
b. Open glove box lid.
c. Remove glove box assembly fixing screws (B).
d. Pull back glove box assembly.
e. Disconnect harness connector.
Figure 14
3. Remove the vehicle mounting bolts and
disconnect the connector, and then remove
them together with the bracket.
4. Remove the bracket mounting screw and
remove the bracket from TCU.
Figure 15
9/13
Deactivate the Old TCU and then Activate the new TCU
IMPORTANT: Steps 1 and 2 below must be performed AFTER the original TCU is removed from the
vehicle and BEFORE the replacement TCU is installed.
1. Collect and have ready the following information:
 VIN.
 International Mobile Equipment Identity Number (IMEI) of the original TCU. This
number is located on the TCU.
 IMEI Number of the replacement TCU. This number is located on the TCU.
 Serial Number of the replacement TCU. This number is located on the TCU.
LABEL ON TCU
Figure 16
2. Call the INFINITI CONNECTION™ Call Center at 1-800-334-7858, press “1” and listen for additional
applicable INFINITI retailer prompts to replace a TCU. (Hours of operation are listed at the bottom of the
page.)
NOTE: The phone number shown above is for TCU activation and deactivation ONLY. The Support Center
agent is unable to assist with matters unrelated to TCU activation and deactivation.
During this call:
 You will be asked for your name, dealership name, and all of the information collected in step 1.
 The Support Center agent will deactivate the original TCU and activate the replacement TCU.
IMPORTANT: Step 2 MUST be performed to activate the replacement TCU. If it is not performed the TCU will
not be able to communicate with the Infiniti Connection Global Data Center.
Infiniti Connection Call Center – Hours of Operation (Central Time Zone)
Monday – Friday: 7AM – 10PM
Saturday: 8AM – 5PM
Special Holiday Hours:
Closed Thanksgiving, Christmas, and New Years Day
Christmas Eve: 7AM – 7PM
New Years Eve: 7AM – 7PM
10/13
Install Replacement TCU

Perform steps 1-4 of Remove the TCU from the Vehicle procedure starting on page 8, in reverse
order, to install.
Turn TCU ON

Perform steps 1-15 of Turn OFF the TCU procedure, starting on page 2, to turn the TCU ON and then
confirm the Current status field shows “On”.
Write VIN Data
1. Select WRITE VIN (SAVED DATA).
2. Select Start.
Step
1
Step
2
Figure 17
11/13
3. Select Start.
Step
3
Figure 18
4. Select End.
Step
4
Figure 19
IMPORTANT:
 Wait at least 2 minutes after the ignition is turned ON before checking for DTCs. If DTCs are checked
prior to this a U1000 may be stored.
 After writing VIN to new TCU, confirm SOS light on overhead console is illuminated solid.
12/13
PARTS INFORMATION
Description
Telematics Control Unit
PART NUMBER
283B0-3JA5A
Quantity
1
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the following claims coding:
CAMPAIGN (“CM”) ID
DESCRIPTION
Replace Telematics Control Unit
PC451
($299 Co-Pay)
OP CODE
FRT
PC4513
1.1 hrs.
PC452
Replace Telematics Control Unit
($149 Co-Pay)
PC4523
1.1 hrs.
PC454
Replace Telematics Control Unit
(Dealer Action Unit – No Co-Pay)
PC4543
1.1 hrs.
13/13
Q50 Telematics Control Unit Replacement
IMPORTANT: Those steps in RED below, under Campaign Overview, MUST be performed in the
order listed for the new TCU to operate correctly.
Campaign Overview:
1.
Turn OFF the original TCU using CONSULT-III plus (C-III plus) (page 2).
2.
Save the VIN DATA using C-III plus (page 7).
3.
Remove the original TCU from the vehicle (page 9).
4.
Deactivate (unregister) the original TCU by calling INFINITI CONNECTION™ Call Center
(page 17).
5.
Activate (register) the replacement TCU by calling INFINITI CONNECTION™ Call Center
(page 17).
6.
Install the replacement TCU in the vehicle (page 18).
7.
Turn ON the replacement TCU using C-III plus (page 18).
8.
Write the VIN DATA using C-III plus (page 18).
1/20
SERVICE PROCEDURE
Turn OFF the TCU
1. Connect the C-III plus VI to the vehicle.
2. Set the parking brake.
3. Turn the Ignition ON, but do not start the vehicle.
4. Launch C-III plus on the CONSULT PC.
5. Select Diagnosis (One System).
Step
5
Figure 1
2/20
6. Select TELEMATICS on page 2 of the “All systems” list.
Step
6
Figure 2
7. Select Work support.
Step
7
Figure 3
3/20
8. Select TCU ACTIVATE SETTING.
9. Select Start.
Step
8
Step
9
Figure 4
10. Select Start.
Step
10
Figure 5
4/20
11. Select Off to turn OFF the TCU.
12. Select End.
Step
11
Step
12
Figure 6
13. Select Start.
Step
13
Figure 7
5/20
14. Select Start.
Step
14
Figure 8
15. Confirm “Off” is displayed in the Current status field.
Step
15
Figure 9
6/20
Save VIN Data
1. Select SAVE VIN DATA.
2. Select Start.
Step
1
Step
2
Figure 10
3. Select Start.
Step
3
Figure 11
7/20
4. Select End.
Step
4
Figure 12
8/20
Remove the TCU from the Vehicle.
1. Remove both the left and right center console side
finishers.
NOTE: Driver side shown In Figure 13 and 14.
Passenger side similar.
Center console
side finisher
Figure 13
2. Confirm that the metal clips for the left and right center console side finisher are in place.

If the clips were detached, remove them from the center console and reattach to the center console
side finishers.
Metal clips
Figure 14
9/20
3. With the Parking brake set, place the shift selector
into “neutral” (N).
Shift knob
4. Remove the shift knob as follows:
Console lid
assembly
Figure 15
Retaining clip
a. Pull the shift boot collar down (Figure 16).
b. Remove the retaining clip (Figure 16).
c. Replace the retaining clip back onto shift knob.
Shift boot
collar
Figure 16
10/20
5. Remove the console upper finisher as follows:
Console upper
finisher
a. Raise the console lid assembly (partially
shown in Figure 15).
NOTE: Figure 17 is shown with the console lid
assembly raised.
Figure 17
Console upper
finisher
b. Lift the console upper finisher at the rear to
start to unclip it from the center console
assembly.
c. Work forward to detach each clip and remove
the console upper finisher.
Figure 18
6. Remove the two screws (Figure 19) that retain the console finisher assembly (Figure 20) that are to the left and
the right of the seat heater buttons, under the audio controls.
Figure 19
11/20
Console finisher
assembly
7. Remove the console finisher assembly from center
console assembly as follows:
a. Lift the rear of the console finisher assembly
gently with equal pressure, as shown in Figure
20, to detach all clips.
b. Lift the console finisher assembly off of the
shift selector.
Figure 20
c. Disconnect all harnesses attached to the console finisher assembly (Figure 21).
d. Disconnect the harness from the console finisher assembly to shift selector assembly (Figure 21).
Disconnect harnesses
Shift selector assembly
Figure 21
12/20
Step 7d
8. Remove the instrument finisher C (Figure 23) and instrument finisher D (Figure 22):
a. Gently detach the bottom of each instrument finisher (“Pull here to start” in Figure 22 and 23) by pulling
toward the rear of the vehicle.

Only pull far enough to unclip from the instrument panel.
b. Open a gap between the instrument finisher and the instrument panel so that enough space is present to
allow a finger to be inserted into the gap just below the vents (Figure 22).
c. Remove both instrument finishers one at a time.
Instrument
finisher D
Instrument
finisher C
Pull here to start
Pull here to start
Figure 22
Figure 23
9. Remove the integral switch (Figure 24) as follows:
a. Remove the two screws at the bottom of the integral switch (Figure 24).
Integral switch
Two screws
Figure 24
13/20
b. Pull the integral switch away from the
instrument panel at the bottom (Figure 25) and
then down to detach upper clip (Figure 25).
Figure 25
c. Disconnect the three harness connectors
(Figure 26) attached to the integral switch.
Figure 26
14/20
10. Remove the A/V & NAVI control unit assembly (Figure 27):
a. Remove the four screws that attach the A/V & NAVI control unit assembly to the instrument panel.
A/V & NAVI
control unit
assembly
Four screws
Figure 27
A/V & NAVI
control unit
assembly
b. Pull the A/V & NAVI control unit assembly
straight back to gain access to attached
harness connectors.
c. Disconnect all harness connectors from the
rear of the A/V & NAVI control unit assembly.
Figure 28
15/20
11. Remove four T20 screws and remove the TCU from the A/V & NAVI control unit assembly (Figure 29).
A/V & NAVI control unit assembly
T20 screws
TCU
Figure 29
TCU
Bracket
12. Remove the two brackets from the original TCU
and transfer to the new TCU (Figure 30).

Each bracket is attached by two T20 screws.

The brackets are left and right specific,
transfer one side at a time.

One side shown in Figure 30. The other side is
similar.
T20 screws
Figure 30
Proceed to “Deactivate the Old TCU and Activate the new TCU” on the next page.
16/20
Deactivate the Old TCU and then Activate the new TCU
IMPORTANT: Steps 1 and 2 below must be performed AFTER the original TCU is removed from the vehicle
and BEFORE the replacement TCU is installed.
1. Collect and have ready the following information:
 VIN.
 International Mobile Equipment Identity Number (IMEI) of the original TCU. This
number is located on the TCU.
 IMEI Number of the replacement TCU. This number is located on the TCU.
 Serial Number of the replacement TCU. This number is located on the TCU.
LABEL ON TCU
Figure 31
2. Call the INFINITI CONNECTION™ Call Center at 1-800-334-7858, press “1” and listen for additional applicable
INFINITI retailer prompts to replace a TCU. (Hours of operation are listed at the bottom of the page.)
NOTE: The phone number shown above is for TCU activation and deactivation ONLY. The Support Center
agent is unable to assist with matters unrelated to TCU activation and deactivation.
During this call:
 You will be asked for your name, dealership name, and all of the information collected in step 1.
 The Support Center agent will deactivate the original TCU and activate the replacement TCU.
IMPORTANT: Step 2 MUST be performed to activate the replacement TCU. If it is not performed the TCU will not
be able to communicate with the Infiniti Connection Global Data Center.
Infiniti Connection Call Center – Hours of Operation (Central Time Zone)
Monday – Friday: 7AM – 10PM
Saturday: 8AM – 5PM
Special Holiday Hours:
Closed Thanksgiving, Christmas, and New Years Day
Christmas Eve: 7AM – 7PM
New Years Eve: 7AM – 7PM
17/20
Install Replacement TCU

Perform steps 1-12 of Remove the TCU from the Vehicle procedure on page 9, in reverse order, to install.
Turn TCU ON

Perform steps 1-15 of Turn OFF the TCU procedure, starting on page 2, to turn the TCU ON and then
confirm the Current status field shows “On”.
Write VIN Data
1. Select WRITE VIN (SAVED DATA).
2. Select Start.
Step
1
Step
2
Figure 32
18/20
3. Select Start.
Step
3
Figure 33
4. Select End.
Figure 34
Step
4
IMPORTANT:
 Wait at least 2 minutes after the ignition is turned ON before checking for DTCs. If DTCs are checked prior
to this a U1000 may be stored.
 After writing VIN to new TCU, confirm SOS light on overhead console is illuminated solid.
19/20
PARTS INFORMATION
Description
Telematics Control Unit
PART NUMBER
283B0-3JA7A
Quantity
1
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the following claims coding:
CAMPAIGN (“CM”) ID
DESCRIPTION
OP CODE
FRT
PC451
Replace Telematics Control Unit
($299 Co-Pay)
PC4510
1.3 hrs.
PC452
Replace Telematics Control Unit
($149 Co-Pay)
PC4520
1.3 hrs.
PC454
Replace Telematics Control Unit
(Dealer Action Unit – No Co-Pay)
PC4540
1.3 hrs.
20/20