ITB16-040

Classification:
Reference:
Date:
EL15-041
ITB16-040
October 5, 2016
2013 JX35 AND 2014 – 2015 QX60; DOOR MIRROR GLASS
WILL NOT RETURN AFTER SHIFTING REVERSE TO DRIVE
APPLIED VEHICLES: 2013 JX35 (L50) equipped with ADP
2014 – 2015 QX60 (L50) equipped with ADP
2014 – 2015 QX60 Hybrid (L50) equipped with ADP
APPLIED VIN:
2013 – 2014, all VIN’s
2015, built before 5N1AL0M(*)(*)FC 525221 / April 7, 2015
APPLIED DATE:
Built before April 8, 2015
IF YOU CONFIRM
The door mirror glass (LH and RH) automatic tilt down-up feature does not return the glass to original position
after shifting from reverse to drive.
ACTION
Replace the Automatic Drive Positioner (ADP) Control
Unit.

Use the new part listed in the Parts
Information.

Refer to the Electronic Service Manual (ESM),
section ADP-Automatic Drive Positioner, for
replacement information.
ADP Control
Unit
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe
that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/2
PARTS INFORMATION
Description
CONTROLLER ASSEMBLY-POWER SEAT
(ADP Control Unit)
PART number
Quantity
28565 – 3JA1A
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
Replace ADP Control Unit
28565 – 3JA1A
VH72AA
HD
(1) Reference the current Infiniti Warranty Flat Rate Manual and use the indicated FRT.
2/10
DIA
32
FRT
(1)
ITB16-040