P-SC-2017010001
Service Bulletin Details
Public Details for: P-SC-2017010001
Perform scn coding in transmission control module
Models from 2018
2018 MERCEDES-BENZ AMG GLC43 |
2018 MERCEDES-BENZ AMG GLC63 |
2018 MERCEDES-BENZ GLC300 |
2018 MERCEDES-BENZ GLC350E |
Campaign No. 2017010001, January 2017 TO: ALL MERCEDES-BENZ CENTERS SUBJECT: Model 204, Model Years 2012 and 2013 Perform SCN Coding in Transmission Control Module Daimler AG (‘DAG’), the manufacturer of Mercedes-Benz vehicles, has determined that on certain CClass vehicles (model 204 platform) the SCN coding in the transmission control module may not be properly configured and may result in torque reduction during vehicle operation. An authorized MercedesBenz dealer will check and update the SCN coding in the transmission control module. Prior to performing this Service Campaign: Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired. Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described. Approximately 3550 vehicles are affected. Order No. P-SC-2017010001 This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records. 2 Procedure Note: Use DAS/Xentry 12/16 with all associated patches or higher. Follow the steps exactly as described in DAS/Xentry. Connect battery charger (battery voltage Ensure all electrical consumers are switched-off. In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the >12.5V). “pre-call” check list before contacting UHD Refer to Star Diagnosis System (SDS) Best Practices Guide. 1. Perform SCN coding in transmission control module: Control units view integrated transmission control Adaptations Control unit update Drive type SCN coding. 2. Follow on-screen instructions. Note: The following allowable labor operation should be used when submitting a warranty claim for this repair: Warranty Information Operation: Connect/disconnect battery charger (02-5058) Star Diagnosis System (SDS), Connect/disconnect (02-4762) Perform SCN coding in transmission control module (02-9446). Damage Code 54 988 46 8 Operation Number 02-5058 02-4762 02-9446 Note Operation Number labor times are subject to change. P-SC-2017010001 Labor Time (hrs.) 0.1 0.1 0.1 VGS fully