PIP5553A
Service Bulletin Details
Public Details for: PIP5553A
- 2018 -
Models from 2018
Bulletin No.: PIP5553A Published date: 09/11/2018 Preliminary Information PIP5553A SES Lamp With Camshaft or Oil Pump System Related DTCs Product Investigation Review Required Models Brand: Model: Model Years: VIN: from to Engine: Transmissions: Cadillac CTS-V 2018 All All 6.2L, LT1, LT4 All Cadillac Escalade 2018 All All 6.2L, L86 All Chevrolet Camaro 2018 All All 6.2L, LT1, LT4 All Chevrolet Corvette 2018 All All 6.2L, LT1, LT4 All Chevrolet Silverado 2018 All All 4.3L 5.3L 6.2L LV3, L83, L86 All Chevrolet Suburban 2018 All All 5.3L L83 6.2l, L86 All Chevrolet Tahoe 2018 All All 5.3L L83 6.2L L86 All GMC Sierra 2018 All All 4.3L 5.3L 6.2L LV3, L83, L86 All GMC Yukon Models 2018 All All 5.3L, 6.2L, L83, L86 All Involved Region or Country North America Condition The vehicle may have an SES lamp with any of the following DTC P06DA, P06DB, P06DC, P250A, P0300, P0340, P0341, P0335, P0336, P0641, P0011, P0010, P2088, P2089, and/or P2230. Possible crank no start or a stall. Cause Possible wiring jumper harness cha ed at the bolt at the X154 connector on lower left side of the engine front cover. Correction: Inspect for the wiring harness being cha ed or pinched under the bracket on the location below. Below is what has been found Before installing a new jumper harness be sure to inspect the wiring harness. As seen above 1. shows a good harness 2. shows a suspect harness. if the harness looks like number 2 please adjust the harness as needed. When a permanent repair or part replacement is identi ed a PI revision or bulletin will be submitted. Version History Version 2 Modi ed 02/01/2018 – Created 09/11/2018 – Updated Condition Section © 2018 General Motors. All Rights Reserved.