JTB00646NAS1
Service Bulletin Details
Public Details for: JTB00646NAS1
Water ingress into the passenger and/or luggage compartment may be evident.
- 2017 -
Models from 2017
2017 JAGUAR XE |
2017 JAGUAR XF |
7/25/2018 JTB00646NAS1 - Water Ingress Into The Passenger And/Or Luggage Compartment | TOPIx JTB00646NAS1 TECHNICAL BULLETIN 24 JUL 2018 © Jaguar Land Rover North America, LLC NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle. INFORMATION SECTION: 501-25B: Body Repairs - Water Leaks SUBJECT/CONCERN: Water Ingress Into The Passenger And/Or Luggage Compartment AFFECTED VEHICLE RANGE: MODEL: MODEL YEAR: VIN: ASSEMBLY PLANT: XE (X760) 2017 921222-995971 Solihull XE (X760) 2017 P10168-P28201 Castle Bromwich XF (X260) 2017 Y11189-Y53221 Castle Bromwich https://topix.jaguar.jlrext.com/topix/content/document/view?id=917324 1/4 7/25/2018 JTB00646NAS1 - Water Ingress Into The Passenger And/Or Luggage Compartment | TOPIx MARKETS: NORTH AMERICA CONDITION SUMMARY: SITUATION: Water ingress into the passenger and/or luggage compartment may be evident. CAUSE: This may be caused by water ingress through the high mounted stop lamp location grommets. ACTION: Should a customer express this concern, follow the Workshop Procedure below. PARTS: PART NUMBER T2R14098 DESCRIPTION Grommet QUANTITY 2 TOOLS: Refer to Workshop Manual for any required special tools. WARRANTY: NOTES: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to JLR claims submission system to obtain the latest repair time. The JLR Claims Submission System requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero. https://topix.jaguar.jlrext.com/topix/content/document/view?id=917324 2/4 7/25/2018 JTB00646NAS1 - Water Ingress Into The Passenger And/Or Luggage Compartment | TOPIx DESCRIPTION TIME (HOURS) SRO CONDITION CODE CAUSAL PART High mounted stop lamp grommets - Replace - XE (X760) 76.96.74 2.0 D8 T2H32082 High mounted stop lamp grommets - Replace - XF (X260) 76.96.74 2.2 D8 T2H32082 NOTE: Normal Warranty procedures apply. WORKSHOP PROCEDURE: NOTE: Before returning the vehicle to the customer, make sure any effects of the water ingress (carpets, wiring, control modules -- especially the Telematics Control Module [TCU] -- , etc.) have been identified and repaired. To be performed as a separate claim. 1 Access the high mounted stop lamp (see TOPIx Workshop Manual section 417-01: Lighting Exterior Lighting - Removal and Installation - High Mounted Stoplamp [Steps 1-13]). 2 Complete a water test on the high mounted stop lamp. If water ingress is through the location grommets, go to Step 3. If water ingress is not through the location grommets, DO NOT continue with this Technical Bulletin. 3 Remove the high mounted stop lamp (see TOPIx Workshop Manual section 417:01: Lighting Exterior Lighting - Removal and Installation - High Mounted Stoplamp [from Step 13]). https://topix.jaguar.jlrext.com/topix/content/document/view?id=917324 3/4 7/25/2018 4 JTB00646NAS1 - Water Ingress Into The Passenger And/Or Luggage Compartment | TOPIx Replace the 2 location grommets. 5 Install the high mounted stop lamp (see TOPIx Workshop Manual section 417-01: Lighting Exterior Lighting - Removal and Installation - High Mounted Stoplamp). https://topix.jaguar.jlrext.com/topix/content/document/view?id=917324 4/4