2054210.2

Service Bulletin Details

Public Details for: 2054210.2

Noises from panoramic sun roof


- 2020 - 2019 - 2018 - 2017 -

Technical Service Bulletin
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
Noises from Panoramic sun roof
Bentley: worldwide (2WBE),Hongkong-Macau (5HK)
Bentley
2054210/2
EH
Released for publishing
May 17, 2019
New customer code
Object of complaint
Complaint type Position
roof systems, special equipment -> panorama sliding sunroof noises, vibrations
roof systems, special equipment -> sliding/tilting sunroof
noises, vibrations
Vehicle data
Bentayga
Sales types
Type
4V1*
4V1*
4V1*
4V1*
MY
2017
2018
2019
2020
Brand Designation Engine code Gearbox code
E
*
*
E
*
*
E
*
*
E
*
*
Documents
Document name
master.xml
Final drive code
*
*
*
*
Technical Service Bulletin
Noises from Panoramic sun roof
Transaction No.: 2054210/2
Release date: May 17, 2019
Condition
Noises from the Panoramic sun roof when driving. The noises occur mainly when the sun roof is closed.
Technical Background
Mechanical system of sun roof frame not or insufficiently lubricated.
Production Solution
Vehicles from production date 17.05.2018 should not be affected by this issue, however if the issue is evident after the suggested production date,
please carry out the instructions within this TPI
Service
1) Remove the front glass panel according to Repair manual Rep.Gr 60 NOTE: Within this procedure there are single use items which must be
replaced and not reused. Ensure that new replacements are available prior to starting this procedure.
WARNING: Eye protection and gloves MUST be worn for the duration of this procedure
•
For a better access to the points to be greased move the mechanical system (slightly) rearwards
•
Apply grease spray G 060 567 A2 to the points shown within the onward instructions
2) The above illustration shows the left mechanical system. The upper left arrow points to the driving direction. The lower arrow points to the first
mounting point of the glass panel.
•
There is a lug under the first mounting point (see arrow). This should be sprayed once or twice.
•
The above illustration shows the right mechanical system from the inside. Here is the groove (see arrow) which also has to be sprayed once or
twice.
•
The above illustration shows the left mechanical system which also has to be lubricated in the outer rear area (see arrow).
•
The above illustration shows the point after the lubrication.
•
The above illustration shows the left front mechanical system. Here the point to be lubricated which can be reached with the nozzle via the first
hole in the lever.
•
This point also has to be sprayed once or twice.
Note: Perform the work on both sides.
3) Then refit the glass panel according to the Repair manual. Open and close the glass panel at least twice
•
Carry out Basic settings for the Sliding sunroof normalisation and Roof blind normalisation
Warranty
Glass panel to Remove and Refit
Warranty Type
110 or 910
Labour Operation Code
60 39 19 00
Damage Service Number
60 39
Damage Code
00 55
Time
30 TU
Application of Lubricant
Warranty Type
110 or 910
Labour Operation Code
60 05 29 00
Damage Service Number
60 05
Damage Code
00 55
Time
30 TU
Required Parts and Tools
Use special lubricant G 060 567 A2 from a local VW/Audi Retailer the equivalent is Carbaflo 2160 (Manufactured by FUCHS) which should also be
sourced locally


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.