NTB19-118

Classification:
Reference:
EL19-070
Date:
NTB19-118
December 13, 2019
ALTIMA, KICKS AND VERSA SEDAN; MIL ON WITH DTC B26FE
APPLIED VEHICLES:
APPLIED SYSTEM:
2019-2020 Altima (L34)
2018-2020 Kicks (P15)
2020 Versa Sedan (N18)
Remote Engine Start (RES)
IF YOU CONFIRM

A “Key System Error” message is displayed on the combination meter,
And

DTC B26FE (IPDM - KEY SYSTEM ERROR) is stored in the BCM.
ACTION
1. Disconnect the main power harness connector from the IPDM (E16 for Altima and
E42 for Kicks and Versa Sedan).

See Figure 1, Figure 2 and Figure 3 on the next page for IPDM main power
harness connector locations.
2. Wait at least 20 seconds.
3. Reconnect the main power harness connector to the IPDM.
4. Confirm that the DTC is now past, and then erase the DTC.
If the DTC will not erase, refer to the Electronic Service Manual for additional diagnostic
information.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/3
Altima
Figure 1
Kicks
Figure 2
Versa
Sedan
Figure 3
2/3
NTB19-118
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Disconnect IPDM Power and Clear DTC
(1)
RX8VAA
ZE
32
0.3
(1)
Reference the electronic parts catalog and use the IPDM (284B7-*****) as the Primary
Failed Part (PFP).
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
December 13, 2019
NTB19-118
DESCRIPTION
Original bulletin published
3/3
NTB19-118