IS-20905

IS-20905
Instruction Sheet
HAND SANITIZER DISPENSER INSTALLATION
First Release
04-29-2020
MATERIAL
Kit #IS20905_1 includes the following parts:
Part No.
Description
Qty
900148*
DISPENSER, GEL, PURELL ANTISEPTIC
1
500642
SCR TP PAN PH Z050 10X3/4
4
IS-20905
INSTRUCTION SHEET
1
FI-20905
FEUILLE D’INSTRUCTION
1
*Use Purell refills # 2770-CAN
Kit #IS20905_2 includes the following parts:
Part No.
900088**
Description
Qty
WALL MOUNTED SOAP DISPENSER
1
SCR TP PAN PH Z050 8X1/2
4
IS-20905
INSTRUCTION SHEET
1
FI-20905
FEUILLE D’INSTRUCTION
1
500638
**Use refills # 901385 or other liquid sanitizer type
Kit #IS20905_3 includes the following parts:
Part No.
22435173**
Description
Qty
WALL MOUNTED SOAP DISPENSER
1
SCR TP PAN PH Z050 8X1/2
4
IS-20905
INSTRUCTION SHEET
1
FI-20905
FEUILLE D’INSTRUCTION
1
500642
**Use refills # 901385 or other liquid sanitizer type
Writer: MG

IS-20905
Page 2 / 5
PROCEDURE
DANGER
Park vehicle safely, apply parking brake, stop engine. Prior to working on the vehicle, set the ignition
switch to the OFF position and trip the main circuit breakers equipped with a trip button. On Commuter
type vehicles, set the battery master switch (master cut-out) to the OFF position.
Lock out & Tag out (LOTO) must be performed during set-up, maintenance or repair activities. Refer to
your local procedure for detailed information regarding the control of hazardous energy.
ENTRANCE INSTALLATION
NOTE
Dispenser model 900148 used for reference purposes, use provided positioning for all
dispenser models (9900148, 900088 & 22435173).
H345 ENTRANCE INSTALLATION
1. To avoid the risk of drilling through the wiring
harness, we recommend to remove the
modesty panel prior to the installation.
2. Position the hand sanitizer dispenser as
shown in the picture. This position is
recommended to avoid interference with the
passenger shoulders.
3. Drill 1/8” pilot holes and secure the back plate
using the 4 provided tapping screws.
mg

IS-20905
Page 3 / 5
X3-45 ENTRANCE INSTALLATION
1. To avoid the risk of drilling through the wiring
harness, we recommend to remove the
modesty panel prior to the installation.
2. Position the hand sanitizer dispenser as
shown in the picture. This position is
recommended to avoid interference with the
passenger shoulders.
3. Drill 1/8” pilot holes and secure the back plate
using the 4 provided tapping screws.
VOLVO 9700 ENTRANCE INSTALLATION
1. Position the hand sanitizer dispenser as
shown in the picture. This position is
recommended to avoid interference with the
passenger shoulders.
2. Drill 1/8” pilot holes and secure the back plate
using the 4 provided tapping screws.
mg

IS-20905
Page 4 / 5
LAVATORY INSTALLATION
H345 LAVATORY INSTALLATION
1. Position dispenser as shown in pictures.
2. Drill 1/8” pilot holes and secure the back plate
using the 4 provided tapping screws.
3. Optional Installation: Clean surface with
alcohol, peel off backing from double sided
tape provided with the dispenser and stick in
place.
mg

IS-20905
Page 5 / 5
X3-45 LAVATORY INSTALLATION
1. Position dispenser as shown in pictures.
2. Drill 1/8” pilot holes and secure the back plate
using the 4 provided tapping screws.
3. Optional Installation: Clean surface with
alcohol, peel off backing from double sided
tape provided with the dispenser and stick in
place.
VOLVO 9700 LAVATORY INSTALLATION
1. Position dispenser as shown in pictures.
2. Drill 1/8” pilot holes and secure the back plate
using the 4 provided tapping screws.
3. Optional Installation: Clean surface with
alcohol, peel off backing from double sided
tape provided with the dispenser and stick in
place.
PARTS / WASTE DISPOSAL
Discard waste according to applicable environmental regulations (Municipal/State[Prov.]/ Federal)
mg