Prevost X3-45 2004
Vehicle Details: Service Bulletins
Below you will find all available information on the 2004 PREVOST X3-45.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
PREVOST |
PREVOST VIN Decoder
Use the box here to look up VINs from PREVOST as well as other manufacturers
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- IS-23019 - SUSPENSION: Sway bar collars improvement
- IS-21072B - ELECTRICAL SYSTEM: Steering gateway. Revision b - pin 2 and 10 were inverted on connector a139
- MI22-12B - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: b - general update
- MI22-12A - SERVICE BRAKES, AIR: Air tanks draining sequence. Revision: a - erroneous secondary & accessory tanks location.
- MI22-12 - SERVICE BRAKES, AIR: Air tanks draining sequence
- IS-17151C - VISIBILITY: Halogen to led fog light replacement kit. Revision: c - advanced kits canceled
- IS20-925A - VISIBILITY: Central hvac merv filters installation
- MI20-08C - STRUCTURE: Storage and startup guidelines: periodically, circumstances arise requiring operators to temporarily park a coach in storage. Whether it is a few weeks or several months, sporadic out of service times or a full stop, prevost recommends foll
- IS-20925A - POWER TRAIN: Central hvac merv filters installation reva
- IS-18091A - STEERING: Tie rod 610052 first installation instructions: use these instructions when replacing the drop joint tie rod on s82, s84 / s84u i-beam axles. The new tie rod will be adjusted to the length of the original; however, a steering alignment ne
- MI20-19A - EQUIPMENT: Rev a: mention added concerning ddc series 60 engine sca requirement
- MI20-19 - ENGINE AND ENGINE COOLING: Introducing a new engine coolant into service
- SCi20-16 - ENGINE AND ENGINE COOLING: Fan clutch plate bolts re-torquing
- MI20-08B - EQUIPMENT: Storage and startup guidelines revision: b parts added to suggested material 08-10-2020
- MI20-12 - STEERING: Jerky, noisy or hard to turn steering gearbox. Hydraulic end limiter adjustment. All models a?? Equipped with rb bosch/zf servocom or servocomtronic steering gearbox
- MI20-08A - EQUIPMENT: Storage and startup guidelines: rev a: 21516229 replaced by 23381562 20523393 replaced by 21454749 800383 removed 611471 replaced by 611360 70376808 replaced by 21036050 21396642 replaced by 20967831
- MI20-09 - EQUIPMENT:OTHER:LABELS: Prevost vehicle disinfection procedure
- MI20-08 - UNKNOWN OR OTHER: Storage and startup guidelines - all prevost vehicles & volvo 9700
- IS-20905 - EQUIPMENT: Hand sanitizer dispenser installation
- MI15-24 - ELECTRICAL SYSTEM: Added: power cables for l.H. Side alternator & fan drive breaker box
- IS-19923A - EQUIPMENT:ELECTRICAL: Revision : addition of wiring schematics at the end of this document
- SCI19-30 - ELECTRICAL SYSTEM: The intent of this procedure is to guide you through the steps required to program a mcm especially for the control of the hvac module as described in instruction sheets is-19923.
- MI18-45A - STEERING: Vehicles identified below are compatible with a new tie rod design. This new tie rod 610052 has updated ball joints and a fine adjuster sleeve. It replaces former drop type ball joint tie rods. Refer to is-18091 for installation instruction
- IS-19915 - ELECTRICAL SYSTEM: Mp-1000 multimedia player installation
- IS-19040 - STEERING: Power steering pump discharge hose (pressure) replacement
- SCI09-28 - SEAT BELTS: Prevost: installing three-point passenger seat restraint system. The purpose of the following procedure is to facilitate the job and to help identify the difficult areas. Also included models he-41 and he-45 coaches model years 1998-2008; m