2058477/3

Technical product information
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
Bentayga - Button Module For Driving Profile Selection
Bentley: worldwide (2WBE)
Bentley
2058477/3
EH
Released for publishing
03-Jul-2020
New customer code
Object of complaint
Complaint type
Position
engine -> operation, engine control -> engine start/stop button
component / consumables -> damaged
engine -> operation, engine control -> drive mode switch
component / consumables -> damaged
engine -> operation, engine control -> drive mode switch
functionality -> too stiff
driver assist systems, convenience features -> vehicle setup -> vehicle set-up switch component / consumables -> damaged
running gear -> adaptive suspension, pitch and roll compensation
functionality
engine -> starter, ignition system, preheater system -> ignition/starter switch
component / consumables -> damaged
engine -> starter, ignition system, preheater system -> ignition/starter switch
functionality -> too stiff
New workshop code
Object of complaint
Complaint type
engine -> starter, ignition system, preheater system -> starter solenoid switch
functionality -> without function /
defect
functionality -> without function /
defect
running gear -> adaptive suspension, pitch and roll compensation -> suspension adjustment
switch
Vehicle data
Bentayga series
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
4V1*
4V1*
4V1*
4V1*
4V1*
2017
2018
2019
2020
2021
E
E
E
E
E
Documents
Document name
master.xml
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Position
Technical product information
Bentayga - Button Module For Driving Profile Selection
Transaction No.: 2058477/3
Release date: 03-Jul-2020
Customer statement / workshop findings
“Button Module For Driving Profile Selection” requires replacement.
Technical background
There is an ongoing factory investigation into failures of the “Button Module For Driving Profile Selection”.
Any “Button Module For Driving Profile Selection” that is removed due to a fault is to be returned fully assembled using the Warranty parts return
process.
Production change
Not applicable.
Measure
When removing the “Button Module For Driving Profile Selection” due to a fault condition, do not attempt to disassemble and r ectify, once
removed assemblies should be returned using the Warranty parts return process.
Note: For information with regard to the Warranty parts return system, refer to “ Bentley Hub – Aftersales – Warranty – 19-42
Parts return process”.
Parts information
Always refer to the Electronic Parts Catalogue for the latest part information – ETKA.