NTB20-097

Classification:
Reference:
AT20-009
Date:
NTB20-097
December 22, 2020
2015-2020 MURANO; ENGINE SUPPORT TOOLS
FOR CVT REMOVAL - AWD
APPLIED VEHICLES:
APPLIED ENGINE:
2015-2020 Murano (Z52) – AWD only
VQ35DE
NOTE: For 2015-2018 FWD vehicles, refer to TSB
NTB19-043. For 2019 and later FWD vehicles, refer to the
ESM.
SERVICE INFORMATION
The Engine Support Tool and Engine Support Bracket are now available to allow the
CVT to be removed from the Applied Vehicles, without removing the engine (Figure 1).
The service procedure for using these tools is located in the 2021 Murano ESM.
Refer to the 2021 Murano ESM to remove the CVT using the Engine Support Tools. ESM
section: TRANSMISSION & DRIVELINE - TRANSAXLE & TRANSMISSION - CVT:
RE0F10J - UNIT REMOVAL AND INSTALLATION - TRANSMISSION ASSEMBLY - ALL
WHEEL DRIVE.
Figure 1
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
PARTS INFORMATION
Refer to the Library in the EPC for the Single Use Parts List.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
(1)
DESCRIPTION
OP CODE
FRT
CVT R&I
JD01AA
(1)
Refer to the current Nissan Warranty Flat Rate Manual for current FRTs.
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
December 22, 2020
NTB20-097
DESCRIPTION
Original bulletin published
2/2
NTB20-097