NTB16-045B
Service Bulletin Details
Public Details for: NTB16-045B
2016-2019 titan and titan xd; 7 speed a/t dtcs stored this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.
Models from 2019
2019 NISSAN TITAN |
Models from 2018
2018 NISSAN TITAN |
Models from 2017
2017 NISSAN TITAN |
Models from 2016
2016 NISSAN TITAN |
Classification: Reference: AT16-003B Date: NTB16-045B March 2, 2021 2016-2019 TITAN AND TITAN XD; 7 SPEED A/T DTCs STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. APPLIED VEHICLES: 2016-2019 Titan and Titan XD (A61) APPLIED TRANSMISSION: RE7R01B (7 A/T – 7 speed) APPLIED ENGINE: VK56VD (V8 Gasoline) SERVICE INFORMATION IMPORTANT: If you confirm one or more of the following transmission DTCs are stored: P0729: 6GR Incorrect Ratio P0730: Incorrect Gear Ratio P0731: 1GR Incorrect Ratio P0732: 2GR Incorrect Ratio P0733: 3GR Incorrect Ratio P0734: 4GR Incorrect Ratio P0735: 5GR Incorrect Ratio P1734: 7GR Incorrect Ratio Before performing any transmission repairs: 1. Check all of the engine intake air ducting and make sure: It is connected securely and correctly at the throttle body and all other connections. See Figures 1 and 2 on the next page. All clamps and connectors are secure and tight. There are no air leaks. 2. Perform DTC confirmation procedure to confirm the incident. Refer to the Electronic Service Manual (ESM) for DTC confirmation procedures. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/2 Secure connection Connection not secure X Figure 1 Figure 2 AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION April 21, 2016 NTB16-045 November 11, 2016 NTB16-045A APPLIED VEHICLES revised March 2, 2021 NTB16-045B APPLIED VEHICLES revised Original bulletin published 2/2 NTB16-045B