NTB16001

Classification:
EL15-044
Reference:
Date:
NTB16-001
January 4, 2016
NISSAN; SERVICE INFORMATION FOR COMBINED BCM
REPLACEMENT AND ADDING MORE INTELLIGENT KEYS
2015 - 2016 Murano (Z52)
APPLIED VEHICLES: 2015 - 2016 Altima (L33)
2015 - 2016 Pathfinder (R52) 2015 - 2016 Rogue (T32)
2016 Maxima (A36)
SERVICE INFORMATION
When the BCM in an APPLIED VEHICLE is being replaced for any reason, all existing
Intelligent Keys must be re-registered. If new Intelligent Keys are added to the existing
Intelligent Keys at the same time the BCM is being replaced, the procedure below must
be followed.
1. Initialize the new BCM using CONSULT-III plus (C-III plus).

The new BCM’s memory contents for any Intelligent Keys has now been erased.
2. Re-register all existing Intelligent Keys first, and then register all new (added)
Intelligent Keys.
CAUTION: If the new (additional) Intelligent Keys are registered BEFORE the
existing Intelligent Keys, the existing Intelligent Keys will then not re-register,
becoming permanently inoperable.
NOTE: This issue does not apply when adding new Intelligent Keys with existing
Intelligent Keys and the BCM has not been replaced. In this case, all Intelligent Keys
may be registered in any order.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly
and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that
it does. See your Nissan dealer to determine if this applies to your vehicle.
1/1