SSM75443
Service Bulletin Details
Public Details for: SSM75443
Washer fluid low message displayed when washer bottle full
- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 -
Models from 2022
2022 JAGUAR F-PACE |
2022 JAGUAR XE |
2022 JAGUAR XF |
Models from 2021
2021 JAGUAR F-PACE |
2021 JAGUAR XE |
2021 JAGUAR XF |
Models from 2020
2020 JAGUAR F-PACE |
2020 JAGUAR XE |
2020 JAGUAR XF |
Models from 2019
2019 JAGUAR F-PACE |
2019 JAGUAR XE |
2019 JAGUAR XF |
Models from 2018
2018 JAGUAR F-PACE |
2018 JAGUAR XE |
2018 JAGUAR XF |
Models from 2017
2017 JAGUAR F-PACE |
2017 JAGUAR XE |
2017 JAGUAR XF |
Models from 2016
2016 JAGUAR XF |
Special Service Message NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the same importance of a Technical Service Bulletin. An SSM is a quick method of communicating "Need To Know" information to the technical service community. SSM's may be issued in advance of a technical bulletin or may be the only communication on a given topic. All information contained in Jaguar technical communications are intended for use by trained, professional technicians with the knowledge, tools, and equipment required to complete the procedure correctly and safely. It informs the Technicians of conditions that may occur on some vehicles, or provides information that could assist in correct vehicle and diagnostic service. SSM 75443 - Washer Fluid Low Message Displayed When Washer Bottle Full Models : F-Pace / X761 XE / X760 XF / X260 Engineer Hooper Tristan Name : Last 21 JUN 2021 10:17:36 Modified : Category : Electrical Symptom : 202000 Wiper/Washer System Content : Issue: JLR is investigating Washer Fluid Low Message displayed in the Instrument Panel Cluster (IPC) when the Washer Bottle is full Cause: Under investigation Action: If this symptom is reported please raise an ePQR with the following information; Confirm low level warning light illumination –Attach photo Check for any odour from reservoir Inspect washer bottle fluid level, Ensure bottle is full Inspect level sensor electrical connection for signs of corrosion check resistance value of washer level sensor and record values Nominal Bottle (full) =Open circui Empty = 39 ±2 (AB level) / 0.3 (AA level) Remove sensor and confirm condition (is there any excessive residue on sensor or in the bottle) Check resistance of switch in both open and closed position (have values changed) Replace Washer Level Sensor Thank you in advance for your assistance with this matter. Jaguar Land Rover Limited 2000 - 2020 (Rel. 2691)