NTB19-118B

Service Bulletin Details

Public Details for: NTB19-118B

Altima, kicks and versa sedan; dtc B26FE in bcm and key system error this bulletin has been amended. See amendment history on the last page. Discard all previous versions of this bulletin.


- 2021 - 2020 - 2019 -

Models from 2021
2021 NISSAN KICKS
Classification:
Reference:
KS19-070B
Date:
NTB19-118B
June 2, 2021
ALTIMA, KICKS AND VERSA SEDAN;
DTC B26FE IN BCM AND KEY SYSTEM ERROR
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Discard all previous versions of this bulletin.
APPLIED VEHICLES: 2019-2020 Altima (L34)
2019-2021 Kicks (P15)
2019-2020 Versa Sedan (N18)
APPLIED DATE:
Altima built on or before: 9/14/20 (Canton)
(11th VIN character = N, 1N4*L*****N******)
8/14/20 (Smyrna)
(11th VIN character = C, 1N4*L*****C******)
Kicks built on or before: 9/21/20
Versa Sedan built on or before: 8/19/20
APPLIED SYSTEM:
Remote Engine Start (RES)
IF YOU CONFIRM
A “Key System Error” message is displayed on the combination meter,
AND
DTC B26FE (IPDM - KEY SYSTEM ERROR) is stored in the BCM.
ACTION
Replace the Intelligent Power Distribution Module - Engine Room (IPDM E/R).
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
SERVICE PROCEDURE
1.
Replace the IPDM E/R.

For IPDM E/R replacement, refer to the ESM section below.
o ELECTRICAL & POWER CONTROL > POWER CONTROL SYSTEM >
IPDM E/R > REMOVAL AND INSTALLATION > IPDM E/R.
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
Control Unit Assy (IPDM E/R)
284B7-6CA3A
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
(1)
(2)
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Replace the IPDM E/R
(1)
RD21AA
ZE
32
(2)
Reference the electronic parts catalog and use the IPDM E/R (284B7-*****) as the
Primary Failed Part (PFP).
Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
DESCRIPTION
December 13, 2019
NTB19-118
Original bulletin published
March 25, 2021
NTB19-118A
Changes made throughout bulletin
June 2, 2021
NTB19-118B
PARTS INFORMATION revised
2/2
NTB19-118B


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.