T-SB-0080-19 Rev

T-SB-0080-19
Rev1
July 9, 2019
HVAC Evaporator Drain Hose Clogged Due to Insect
Intrusion
Service
Category
Section
Vehicle Interior
Heating/Air Conditioning
Market USA
Applicability
YEAR(S)
MODEL(S)
2010 - 2022
4Runner, Prius
2013 - 2022
Avalon HV
2007 - 2022
Avalon, Camry, Camry HV
2018 - 2022
C-HR
2022
Corolla Cross, Tundra
2019 - 2022
Corolla Hatchback
2009 - 2022
Corolla
2007 - 2014
FJ Cruiser
2008 - 2022
Highlander, Highlander HV
2009 - 2013
Matrix
2016 - 2022
Mirai
2012 - 2018
Prius C
2010, 2012 - 2015
Prius PHV
2017 - 2022
Prius Prime
2012 - 2017
Prius V
2013 - 2014
RAV4 EV
2006 - 2022
RAV4
2021 - 2022
Sienna HV, Venza HV
2011 - 2020
Sienna
2010 - 2022
Tacoma
ADDITIONAL INFORMATION
© 2021 Toyota Motor Sales, USA
Page 1 of 9
T-SB-0080-19
Rev1
July 9, 2019
Page 2 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
2009 - 2016
Venza
2007 - 2019
Yaris
2017 - 2018
iM
REVISION NOTICE
July 26, 2021 Rev1:
 Applicability has been updated to include 2010 – 2022 model year Toyota vehicles.
 The Parts Information section has been modified.
 The Repair Procedure E section has been added.
Any previous printed versions of this bulletin should be discarded.
SUPERSESSION NOTICE
The information contained in this bulletin supersedes Service Bulletin No. T-SB-0033-14.
 Applicability has been updated to include 2019 model year Toyota vehicles.
Service Bulletin No. T-SB-0033-14 is obsolete and any printed versions should be discarded.
Introduction
Some 2006 – 2022 model year Toyota vehicles in particular geographic areas may exhibit a
condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An
insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of
this environmental condition. For some models, a new drain hose is required to properly fit the
ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this
optional service part.
NOTE
The ARINIX® Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
© 2021 Toyota Motor Sales, USA
T-SB-0080-19
Rev1
July 9, 2019
Page 3 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Parts Information
PART NUMBER
MODEL
MODEL YEAR
All
2006 – 2022
87265-33010
4Runner
2010 – 2022
88539-60340
Avalon
2007 – 2018
Avalon HV
2013 – 2018
Avalon/
Avalon HV
2019 – 2022
Camry/
Camry HV
2007 – 2017
(NAP)
2007 – 2011
(Japan
Prod.)
Camry
(NAP and
Japan Prod.)
2018 – 2022
Camry (AWD)
2021 – 2022
PREVIOUS
88539-06121
NEW
88539-33160
88539-33130
88888-06020
88539-06121
88539-06120
88539-33090
88539-33160
QTY
Water Hose
Connector
(ARINIX® Tip)
All
1
B
1
A
1
Hose, Drain
Cooler, Grommet
E
1
Hose,
Drain Cooler
A
1
Hose,
Drain Cooler
1
E
Hose, Drain
Cooler, Grommet
C-HR
2018 – 2022
Corolla iM
2016 – 2019
88539-12230
Corolla
Hatchback
2019 – 2022
88539-47060
88539-02160
88539-02410
88539-12200
1
D
2014 – 2019
88539-02270
2019 – 2022
88539-47060
© 2021 Toyota Motor Sales, USA
1
1
B
Hose,
Drain Cooler
88539-02270
90480-26030
Corolla
REPAIR
PROCEDURE
88539-06230
88888-06020
88539-47060
88888-06020
88539-F4010
88888-47010
2009 – 2013
PART NAME
1
1
A
1
Grommet
Hose,
Drain Cooler
1
B
1
T-SB-0080-19
Rev1
July 9, 2019
Page 4 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Parts Information (continued)
PART NUMBER
MODEL
MODEL YEAR
Corolla Cross
2022
88539-02430
FJ Cruiser
2007 – 2014
88539-35030
PREVIOUS
NEW
2010 – 2016
Highlander/
Highlander
HV (Japan
Prod.)
2008 – 2013
88539-48040
88539-0E010
2017 – 2019
88539-0E010
88539-0E090
Matrix
Mirai
Prius C
Prius PHV
Prius Prime
QTY
1
1
88539-0E010
1
Hose,
Drain Cooler
2020 – 2022
2009 – 2013
88539-0E100
88888-06020
88539-02160
88539-02270
90480-26030
2016 – 2020
88539-12230
2021 – 2022
88539-11020
88539-50210
2010 – 2013
Prius
REPAIR
PROCEDURE
B
Highlander/
Highlander
HV (NAP)
Highlander/
Highlander
HV
PART NAME
88539-12200
88539-02160
90480-26030
88539-12230
2016 – 2022
88539-47060
2012 – 2018
88539-52040
88539-12200
88539-02160
Hose, Drain
Cooler, Grommet
E
Grommet
A
2013 – 2015
88539-12230
2017 – 2022
88539-47060
© 2021 Toyota Motor Sales, USA
1
1
1
1
Hose,
Drain Cooler
Grommet
B
A
1
1
1
1
Hose,
Drain Cooler
88539-12230
90480-26030
1
1
88539-12230
2014 – 2015
2010 – 2012
A
Grommet
Hose,
Drain Cooler
B
1
1
A
B
1
1
1
1
T-SB-0080-19
Rev1
July 9, 2019
Page 5 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Parts Information (continued)
MODEL
Prius V
MODEL YEAR
2012 – 2013
2014 – 2017
2006 – 2018
RAV4
2019 – 2022
PART NUMBER
PREVIOUS
8853912200
8853902160
NEW
88539-12230
PART NAME
Hose,
Drain Cooler
90480-26030
88539-0R011
88539-0R050
88888-06020
885390R010
Hose,
Drain Cooler
Hose, Drain
Cooler, Grommet
QTY
1
A
Grommet
88539-12230
885390R010
8853942060
8853942061
REPAIR
PROCEDURE
1
B
1
C
1
D
1
C
1
RAV4 EV
2013 – 2014
Sienna
2011 – 2020
88539-08070
Sienna HV
2021 – 2022
88539-08200
Tacoma
2010 – 2019
88539-04050
Tundra
2022
88897-0C090
Grommet Cooler
1
Venza
2009 – 2016
88539-0T010
Hose,
Drain Cooler
1
Venza HV
2021 – 2022
88539-42070
88888-47010
Hose, Drain
Cooler, Grommet
2007 – 2010
88539-52020
2010 – 2011
88539-52040
Yaris
88539-0R011
Yaris
(Japan Prod.)
2011 – 2014
88539-52040
Yaris
(France Prod.)
2014 – 2019
88539-0D180
Hose,
Drain Cooler
1
1
1
B
E
1
1
1
Hose,
Drain Cooler
B
1
1
Required Tools & Equipment
REQUIRED TOOLS & MATERIAL
QUANTITY
Chemical Resistant Gloves (Made From Waterproof Material)
1
© 2021 Toyota Motor Sales, USA
T-SB-0080-19
Rev1
July 9, 2019
Page 6 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Safety Requirements for Handling the ARINIX® Tip (Water Hose Connector)

Follow the manufacturer’s instructions for cleaning/maintaining personal protection equipment
(PPE). If no such instructions for cleaning/maintaining PPE exist, use detergent and hot water.
Keep PPE separate from other laundry.

Users should remove PPE immediately after handling this product.

Wash the outside of the gloves before removing.

Users should wash hands before eating, drinking, chewing gum, or using the toilet.
CAUTION
IF SWALLOWED:
Call the poison control center or doctor IMMEDIATELY for treatment advice. Have the person
sip a glass of water if able to swallow.
 Do NOT induce vomiting unless instructed by the poison control center or doctor.
 Do NOT give anything by mouth to an unconscious person.
IF ON SKIN OR CLOTHING:
Take off the contaminated clothing IMMEDIATELY. Rinse skin IMMEDIATELY with plenty of
water for 15 – 20 minutes. Call the poison control center or doctor for treatment advice.
IF IN EYES:
Hold eye open and rinse gently and slowly with water for 15 – 20 minutes. Remove contact
lenses (if present) after the first 5 minutes, then continue rinsing eye. Call the poison control
center or doctor for treatment advice.
HOTLINE NUMBER:
Have the product container or label with you when calling the poison control center, doctor,
or going for treatment. You may also contact 800-424-9300 for emergency medical
treatment information.
Directions for Use on ALL Repair Procedures
®
The ARINIX Tip contains permethrin, a pesticide, as the active ingredient. Please note, it is a
violation of Federal law to use this product in a manner inconsistent with its labeling.
© 2021 Toyota Motor Sales, USA
T-SB-0080-19
Rev1
July 9, 2019
Page 7 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Repair Procedure A
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX ® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose.
3. Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
®
4. Put on all necessary PPE and install the ARINIX Tip (water hose connector) into the NEW
HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
®
5. When installing the ARINIX Tip, verify it is
fully seated in the HVAC evaporator drain
hose as shown in Figure 1.
Figure 1.
6. Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
© 2021 Toyota Motor Sales, USA
T-SB-0080-19
Rev1
July 9, 2019
Page 8 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Repair Procedure B
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX ® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose.
3. Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
4. Put on all necessary PPE and install the ARINIX® Tip (water hose connector) into the NEW
HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
5. When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as
shown in Figure 1.
6. Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
Repair Procedure C
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose.
3. Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
4. Before installing the ARINIX® Tip (water hose
connector) into the NEW HVAC evaporator
drain hose, the end of the hose MUST be cut
perpendicular as shown in Figure 2.
Figure 2.
5. Put on all necessary PPE and install the ARINIX® Tip into the NEW HVAC evaporator drain
hose listed in the Parts Information section of this bulletin.
®
6. When installing the ARINIX Tip, verify it is fully seated in the HVAC evaporator drain hose as
shown in Figure 1.
7. Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
© 2021 Toyota Motor Sales, USA
T-SB-0080-19
Rev1
July 9, 2019
Page 9 of 9
HVAC Evaporator Drain Hose Clogged Due to Insect Intrusion
Repair Procedure D
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX ® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose.
3. Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose.
4. Before installing the ARINIX® Tip (water hose connector) into the original HVAC evaporator
drain hose, the end of the hose MUST be cut perpendicular as shown in Figure 2.
5. Put on all necessary PPE and install the ARINIX® Tip into the original HVAC evaporator drain
hose listed in the Parts Information section of this bulletin.
6. When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as
shown in Figure 1.
7. Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose.
Repair Procedure E
1. Follow the instructions provided in the Safety Requirements for Handling the ARINIX ® Tip
(Water Hose Connector) section of this bulletin.
2. Locate the HVAC evaporator drain hose and floor grommet.
3. Following the vehicle specific Repair Manual, remove the HVAC evaporator drain hose and
floor grommet.
4. Put on ALL necessary PPE and install the ARINIX® Tip (water hose connector) into the NEW
HVAC evaporator drain hose listed in the Parts Information section of this bulletin.
5. When installing the ARINIX® Tip, verify it is fully seated in the HVAC evaporator drain hose as
shown in Figure 1.
6. Following the vehicle specific Repair Manual, install the HVAC evaporator drain hose and the
NEW floor grommet.
© 2021 Toyota Motor Sales, USA