KC-159

11/30/21, 11:20 AM
Article

Trucks Equipped With A Cummins Engine - Engine
Preheat Icon Does Not Illuminate In The
Instrument Cluster (IC) During Engine Pre-heat
(Intake Air Heater) Operation - Vehicles With 2018
Instrument Cluster Update, Model Year 2018 And
Newer



Internal Content
If the Preheat Icon does not illuminate while Engine Preheat is active as
shown below:
A. Update Instrument Cluster Software (SW) to enable the
parameter.
1. In Premium Tech Tool (PTT), run Operation 1700-22-03-06
Accessory Kit. The operation can be found under the Program tab.
2. When prompted, enter Accessory Kit Number 85153771.
3. Press the Program button in the lower right-hand corner of the
screen.
4. Allow the programming operation to complete.
B. Set Vehicle (System) Date And Time.
1. Run PTT Operation 1700-22-03-02 System Date and Time. The
operation can be found under the Program tab.
2. More information can be found in CBR Solution K11533602.
; Live UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD7?pyActivity=%40basec…
1/2
11/30/21, 11:20 AM

Tags
Article
k42065042
cummins
Related links and attachments
No links or attachments available
mack
volvo
Feedback
Give feedback
to help improve the content of this article
; Live UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD7?pyActivity=%40basec…
2/2
11/30/21, 11:32 AM
Article

System Date And Time, Information; Diagnostic
Tool ( J-Pro, Premium Tech Tool ( PTT ) ) Displays
Incorrect Timestamp For Diagnostic Trouble Code
( DTC ) / Fault Code Occurrences, Possible Data
Link Codes Present - US07 And Newer Emissions,
Common Mod



Internal Content
Overview
Incorrect time and date timestamps are caused when the Vehicle
Date and Time are not set or set incorrectly. The Vehicle Date and
Time are stored in the Instrument Cluster ( MID 140 ) and are
separate from the Display Date and Time, which is visible on the
Driver Information Display ( DID ).
Multiple modules have internal clocks that compare values with the
Vehicle value. Incorrect Vehicle Date and Time can result in
conflicts between Control Modules, resulting in possible
faults/codes. Examples are: Data Link DTCs, P2080, P2094 and
P242B
If the Instrument Cluster is programmed, the System Date and Time
are cleared in many cases and need to be re-entered. System Date
And Time will need to be checked after programming the Cluster
using the programming operations described below.
Repair
A. Program the System Date and Time
- For Pre-OBD ( US07 and US10 Emissions, Model Years 2008 to
2013 with a 9-pin diagnostic connector ):
1. Run Operation 1700-22-03-02 System Date and Time,
Programming.
; Live UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD8?pyActivity=%40basec…
1/3
11/30/21, 11:32 AM
Article
• Note: If the computer date and time is used (preferred
method to manual entry), ensure that computer date and
time are correct
- For OBD ( US10+OBD13 Emissions, Model Years 2014 and
newer with a 16-pin diagnostic connector:​​
1. Run Operation 1700-22-03-02 System Date and Time.
• Note: If the computer date and time is used (preferred
method to manual entry), ensure that computer date and
time are correct
; Live UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD8?pyActivity=%40basec…
2/3
11/30/21, 11:32 AM
Article

Tags
p204900
k11533602
cu15
p208064
p242b64
p2049-00
cu12 cng
mid 140
p2080-64
cu9 cng
Related links and attachments
No links or attachments available
p242b-64
cu9
Feedback
Give feedback
to help improve the content of this article
; Live UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD8?pyActivity=%40basec…
3/3