SB16011

Service Bulletin
16-011
March 18, 2016
02945 Version 1
MIL Comes On with DTC P0335 and/or P0339
AFFECTED VEHICLES
Year
Model
2013–15
Accord
2016
Accord
2016
Accord
2015
CR-V
2016
CR-V
2016
CR-V
2016
CR-V
2016
CR-V
2016
CR-V
Trim
All L4 except Hybrid
2dr L4
4dr L4
All
2WD
2WD
2WD
AWD
AWD
VIN Range
ALL
1HGCT1...GA000001 thru 1HGCT1...GA005984
1HGCR2...GA000001 thru 1HGCR2...GA100769
ALL
2HKRM3...GH000001 thru 2HKRM3...GH515239
3CZRM3...GG000001 thru CZRM3...GG701576
5J6RM3...GL000001 thru 5J6RM3...GL005557
5J6RM4...GL000001 thru 5J6RM4...GL028294
2HKRM4...GH000001 thru 2HKRM4...GH621578
SYMPTOM
The MIL is on with DTC P0335 (CKP sensor no signal) and or P0339 (CKP sensor circuit intermittent interruption).
POSSIBLE CAUSES
There is corrosion between the engine wire harness and the CKP sensor connector.
CORRECTIVE ACTION
Replace the engine wire harness and the CKP sensor.
PARTS INFORMATION
Part Name
Part Number
Quantity
Crank Sensor
37500-R60-U01
1
O-Ring
91333-PNC-006
1
Intake Manifold Gasket A
17115-5A2-A01
4
Engine Wire Harness (CR-V)
32110-5LA-405
1
Engine Wire Harness (2013 Accord 2.4L M/T)
32110-5A2-305
1
Engine Wire Harness (2013 Accord 2.4L CVT)
32110-5A2-405
1
Engine Wire Harness (2014–16 Accord 2.4L M/T)
32110-5A2-306
1
Engine Wire Harness (2014–16 Accord 2.4L CVT)
32110-5A2-406
1
CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools,
equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you
should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information
applies, contact an authorized Honda automobile dealer.
© 2016 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 4
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation
Number
Description
Flat Rate
Time
Template ID
Failed Part
Number
7371BT
Replace the engine harness
and the CKP sensor (2015–16
CR-V).
3.2 hrs
16-011A
32110-5LA-405
7371BT
Replace the engine harness
and the CKP sensor (2013
Accord 2.4L M/T)
2.1 hrs
16-011B
7371BT
Replace the engine harness
and the CKP sensor (2013
Accord 2.4L CVT).
2.1 hrs
7371BT
Replace the engine harness
and the CKP sensor (2014–16
Accord 2.4L M/T).
2.1 hrs
16-011D
7371BT
Replace the engine harness
and the CKP sensor (2014–16
Accord 2.4L CVT)
2.1 hrs
16-011E
Skill Level:
Defect
Code
Symptom
Code
16-011C
00801
03203
32110-5A2-405
Repair Technician
REPAIR PROCEDURE
The following service information procedures have been used in full or in part within this service bulletin.
For more detail on these procedures and torque specifications, refer to the service information.
• Remove the air intake tube.
• Remove the air intake box.
• Remove the intake manifold.
• Remove the battery.
• Remove the battery base.
1. Loosen the bolt, then remove the second bolt and the CKP sensor cover.
Page 2 of 4
2. Disconnect the CKP sensor connector.
3. Remove the CKP sensor.
4. Replace the engine wire harness with the new harness. To replace the engine wire harness remove the following
components:
•
•
•
•
•
Air intake tube
Air intake box
Intake manifold
Battery
Battery base
5. Install the new CKP sensor with a new O-ring.
6. Connect the CKP sensor connector.
Page 3 of 4
7. Install the CKP sensor cover.
8. Replace all removed parts in the reverse order of removal.
9. Do the CKP pattern clear/CKP pattern learn procedure.
END
Page 4 of 4