SA-001/22
Service Bulletin Details
Public Details for: SA-001/22
Symptom troubleshooting tables to diagnose mazda connect concerns. No. 1 blank screen no. 2. Rear view camera is not displayed no. 3 rebooting no. 4 infotainment system has no sound no. 5 commander switch does not work no. 6 bluetooth devi
- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2022
2022 MAZDA MX-5 |
Models from 2021
2021 MAZDA CX-3 |
2021 MAZDA MAZDA6 |
2021 MAZDA MX-5 |
Models from 2018
2018 MAZDA CX-3 |
2018 MAZDA CX-5 |
2018 MAZDA CX-9 |
2018 MAZDA MAZDA3 |
2018 MAZDA MAZDA6 |
2018 MAZDA MX-5 |
Models from 2017
2017 MAZDA CX-3 |
2017 MAZDA CX-5 |
2017 MAZDA CX-9 |
2017 MAZDA MAZDA3 |
2017 MAZDA MAZDA6 |
2017 MAZDA MX-5 |
Models from 2016
2016 MAZDA CX-3 |
2016 MAZDA CX-5 |
2016 MAZDA CX-9 |
2016 MAZDA MAZDA3 |
2016 MAZDA MAZDA6 |
2016 MAZDA MX-5 |
Models from 2015
2015 MAZDA MAZDA3 |
Models from 2014
2014 MAZDA MAZDA3 |
BULLETIN NOTES This service alert supersedes the previously issued service alert listed below. The changes are noted in Red text. Previous Service Alert: Date(s) Issued: SA-019/21 11/16/21, 09/28/21, 09/01/21, 06/25/21, 04/08/21 and 02/2 6/21 SA-026/20 06/11/20 and 02/11/20 SA-065/17 08/10/17 APPLICABLE MODEL(S)/VINS 2014-2018 Mazda3 2016-2021 CX-3 2016-2020 CX-9 2016-2021 Mazda6 2016-2020 CX-5 2016-2022 MX-5 DESCRIPTION Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns. REPAIR PROCEDURE Before proceeding: • Confirm that the Connectivity Master Unit (CMU) is updated to the latest software version. Go to MGSS -> Infotainment -> MAZDA CONNECT Updates • Go to TSB 16-001/20 to view MAZDA CONNECT CMU software fix list. • Confirm that the customers device is compatible. Go to connect.mazda.com -> Support -> Compatibility. • Confirm that the customers device is updated to the latest software version. • Apple Carplay/Android Auto FAQ, go to SA-070/20. • If you suspect a counterfeit Navi SD card, ask the customer for proof of purchase. It cannot be determined by visually looking at the label. If Mazda Toolbox is used and a counterfeit SD card is detected, the customer VIN may be locked-out. Page 1 of 16 01/11/2022 02:41 PM cciz NOTE: • If possible, complete any one of the Microsoft Forms Questionnaires. Go to MGSS -> Infotainment -> MAZDA CONNECT Questionnaire. • Some customers may complain that on some roads, the speed limit shown in the navigation screen is different from the actual road signs. Every time MAZDA CONNECT starts (boots up when ignition turns ON), the disclaimer notification is shown to notify that there are some difference between the navigation map data and actual road signs. Lead time for updating the navigation map data takes 12 months. ○ ○ Index: No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 Other Symptoms No. 12 How to update the Navigation SD Card Map No. 13 How to Check Navi SD Card VIN Lock Page 2 of 16 01/11/2022 02:41 PM cciz No. 1 Blank Screen Step Inspection Result Action Yes Go to step 2. No Refer to No. 2. Rear View Camera is not displayed 2016-2017 CX-9 - See 09-034/17 1 Is the Rear View Camera displayed? 2 Press the "HOME" button. Is the HOME Yes screen displayed correctly? No 3 Using M-MDS, are any infotainment system DTC's stored? 4 Is there a device connected to the USB Yes port? No Go to step 5. Disconnect the USB device. Does the display function properly after USB device is disconnected? Yes USB device is not compatible. 5 No Go to step 6. 6 Is the connector for the Center Display Yes inserted correctly? No Go to step 7. 7 Are the connectors for the CMU inserted correctly? Yes Go to step 8. No Insert the connectors correctly. 8 Yes Is the center display voltage at 0920304A terminal 1H, L wire color normal? No Go to step 9. Swap the Center Display with good known vehicle. Is the screen display normal? Yes Check / Replace the Center Display. 9 No Go to step 10. Normal Operation Go to step 3 Yes Go to MGSS for DTC diagnosis. No Go to step 4. Go to step 6. Insert the connector correctly. Go to step 10. Check / Replace the CMU. Yes 10 Swap the CMU with good known vehicle. Is the screen display normal? No • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Repair / Replace wiring harness. Go to MGSS View Content -> Wiring Diagram -> Body and Accessories -> Entertainment System. Page 3 of 16 01/11/2022 02:41 PM cciz No. 2 Rear View Camera is not displayed Step Inspection Result Yes No Yes No No Yes No Yes No Yes No Yes Action Go to MGSS for DTC diagnosis Go to step 2. Go to step 3. Go to step 4. Check / Replace the 360 View Monitor control unit. Go to step 4. Go to step 5. 2014-2018 Mazda3 5-door HB 2016-2019 CX-3 Go to 09-031/20 Go to No. 1 Blank Screen. Go to step 6. Insert the connector correctly. Go to step 7. Insert the connector correctly Go to step 8. Insert the connectors correctly Check / Replace the Rear View Camera No Go to Step 9 1 Using M-MDS, are any infotainment system DTC's stored? 2 Is the vehicle equipped with 360 View Monitor? 3 Is the Front Camera and Side Cameras displayed normally? Yes Are images other than the Rear View Camera displayed? Yes 4 5 Is the connector for the Rear View Camera Inserted correctly? 6 Is the connector for the Center Display Inserted correctly 7 Are the connectors for the CMU Inserted correctly 8 Swap the Rear View Camera with good known vehicle. Is the screen display normal? No Check / Replace the CMU. 9 Swap the CMU with good known vehicle. Is the screen display normal? Yes No • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Go to MGSS, WSM, REAR MOUNT CAMERA IMAGE NOT CLEAR/NO IMAGE ON SCREEN. Page 4 of 16 01/11/2022 02:41 PM cciz No. 3 Rebooting Step 1 2 3 4 5 Inspection Result Action Yes Go to MGSS for DTC diagnosis Using M-MDS, are any infotainment system DTC's stored? No Go to step 2. Yes Go to step 3. Does the reboot continue after removing the Check / Replace the Navigation SD card. Navigation SD card? No Note: See TSB 09-015/20 if applicable Yes Go to step 4. Is there a device connected to the USB port? No Go to step 5. USB device is not compatible Disconnect the USB device. Does the reboot stop Yes after USB device is disconnected? No Go to step5. Yes Go to step 6. Check / Replace the CMU. Does the reboot continue after ignition key OFF then back ON? No • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Check / Replace the CMU. 6 Does the reboot continue after vehicle battery disconnect? Yes No • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition No repair needed. Page 5 of 16 01/11/2022 02:41 PM cciz No. 4 Infotainment System Has No Sound Step 1 2 3 Inspection Result Yes Using M-MDS, are any infotainment system DTC's stored? No Is the customer complaint "no sound from Yes left side of vehicle"? No Is the customer's connected device an iPhone? 4 Did iPhone IOS 15.1 or higher resolve customer concern? 5 Is sound normal other than navigation guidance? 6 7 Yes No Yes No Yes No Yes Can you hear the voice after raising the navigation volume? No Can you hear sound after turning on audio Yes mode? No Yes 8 Replace the Navigation SD Card. Can you hear voice after Navigation SD Card No replacement? 9 Can you hear sound after raising the volume of audio? 10 << Source: USB/iPod >> Are there any problems with the media and the music files? << Source: Radio >> Are there any problems with the antenna and the reception? << Source: Bluetooth Audio >> Are there any problems with Bluetooth? 11 Go to MGSS "DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT (US)]" Perform Diagnostic Assist Code “94” Speaker Inspection. Did the Speaker Inspection Pass? Yes No Yes No Pass Fail Action Go to MGSS for DTC diagnosis Go to step 2. Go to step 3. Go to step 4. Advise customer to update their iPhone IOS to 15.1 or higher, then go to step 4. Go to step 5. Repair complete. Collect CMU log data and contact Hotline for additional support. Go to step 6. Go to step 7. Normal Operation. Go to step 8. Normal Operation. Go to step 9. Complete Check / Replace the CMU. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Normal Operation Go to step 10. << Source: USB/iPod >> Check the media and the compatible files. << Source: Radio >> Check the antenna, the reception, and the Tuner and Amp Unit (TAU) side. << Source: Bluetooth Audio >> Check the Bluetooth connection and the Bluetooth device. Go to step 11. Check / Replace the CMU. Retrieve • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Go to MGSS NO SOUND OUTPUT IN ALL MODES [ENTERTAINMENT SYSTEM [WITH Page 6 of 16 01/11/2022 02:41 PM cciz CENTER DISPLAY]] No. 5 Commander Switch Does Not Work Step 1 2 3 4 Inspection Result Action Go to MGSS for DTC diagnosis Using M-MDS, are any infotainment Yes system DTC's stored? No Go to step 2. Go to step 3. Does the Commander Switch work Yes correctly? No Go to step 4. Yes Normal Operation. Does the Steering Wheel Switch work correctly? No Go to step 5. Are fues blown/ missing? Yes No Pass 5 6 7 8 Go to MGSS "DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT (US)]" Perform Diagnostic Assist Code Fail “65” Commander Switch and Steering Wheel Switch Inspections. Did the Switch Inspections Pass? Is the connector for the Commander Yes Switch inserted correctly? No Yes Are the CMU connectors inserted correctly? No Swap the Commander Switch with Yes good known vehicle. Does the Commander Switch work correctly? No • Blown - Diagnose blown fuse • Missing - Install missing fuse Go to step 5. Go to step 6. Replaced the failed switch. Go to MGSS: • Steering Wheel Switch Removal/Installation • Commander Switch Removal/Installation Go to step 7. Insert the connector correctly. Go to step 8. Insert the connectors correctly. Check / Replace the Commander Switch. Go to step 9. Check / Replace the CMU. 9 Swap the CMU from known good vehicle. Does the Commander Switch work correctly? Yes No • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Repair/Replace wiring harness. Go to MGSS View Content -> Wiring Diagram -> Body and Accessories -> Entertainment System. Page 7 of 16 01/11/2022 02:41 PM cciz No. 6 Bluetooth device will not pair Step Inspection 1 2 Result Yes Using M-MDS, are any infotainment system DTC's stored? No Yes Is Bluetooth enabled on the customers device? No Yes 3 Is the customers device paired to the vehicle? 4 Is the customers device selected in MAZDA CONNECT settings? 5 6 7 Delete the device from MAZDA CONNECT and then re-pair it. Does Bluetooth work correctly? Go to http://infotainment.mazdahandsfree.com Web Site. Is the customers device compatible? Does the same symptom occur on another same model/year vehicle? Yes Action Go to MGSS for DTC diagnosis Go to step 2. Go to step 3. Enable Bluetooth on the customers device. Go to step 4. Pair the customers device to the vehicle. See MGSS Bluetooth® PAIRING NOT POSSIBLE [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] Go to step 5. Select the customers device from Bluetooth settings. Normal Operation No Go to step 6. Yes Go to step 7. No The customers device is not compatible. Yes Go to step 8. Check / Replace the CMU. No Yes No No Yes 8 Reboot the customers device. Does Bluetooth work correctly? No • Document device model, software version and occurrence of the condition. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Vehicle operation is normal. Check / Replace the CMU. • Document device model, software version and occurrence of the condition. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Page 8 of 16 01/11/2022 02:42 PM cciz No. 7 Incorrect GPS position Step Inspection Result Action Go to MGSS "DIAGNOSTIC ASSIST FUNCTION Yes Normal Operation. [CONNECTIVITY MASTER UNIT (US)]" Perform Diagnostic Assist Code “72” GPS information verification. 1 Check GPS Received Level. No Go to step 2. 2 Does the Navi system show correct vehicle position? Using M-MDS, are any of the following DTC's stored? - B119F:1D, GPS antenna circuit malfunction - B119F:11, GPS antenna circuit malfunction - B119F:13, GPS antenna circuit malfunction - B119F:92, GPS antenna circuit malfunction Yes Go to step 4. No Go to step 3. 3. Yes Is the wheel and tire size correct according to the tire label? No 4 Is the GPS antenna connector secured properly? 5 Is the GPS wiring harness open or shorted? 6 Are the CMU connectors secured properly? 7 Is the CMU wiring harness open or shorted? 8 Replace GPS antenna. Does the Navigation system show correct position? Yes No Yes No Yes No Yes No Yes No Go to step 8. Swap wheels/tires with correct size. If issue is fixed, inform the customer. Go to step 5. Insert the connector correctly. Repair / Replace GPS wiring harness. Go to step 6. Go to step 7. Insert the connectors correctly. Repair / Replace CMU wiring harness. Go to step 8. Repair completed. Check / Replace the CMU. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition NOTE: Remove aftermarket GPS devices that may interfere with vehicle GPS antenna. Example: Some radar detectors may emit radio waves that interfere with the vehicle GPS antenna. Page 9 of 16 01/11/2022 02:42 PM cciz No. 8 Voice Recognition Does Not Work Step 1 2 3 4 Inspection Using M-MDS, are any infotainment system DTC's stored? Result Action Yes Go to MGSS for DTC diagnosis No Go to step 2. Pass Go to step 3. Go to MGSS "DIAGNOSTIC ASSIST FUNCTION [CONNECTIVITY MASTER UNIT (US)]" Perform Diagnostic Assist Code “65” Commander Fail Switch and Steering Wheel Switch Inspections. Did the Steering SW Inspection Pass? Go to MGSS "DIAGNOSTIC ASSIST FUNCTION Pass [CONNECTIVITY MASTER UNIT (US)]" Perform Diagnostic Assist Code “61” Microphone signal Fail input condition Did the Microphone Inspection Pass? Yes Go to MGSS VOICE OPERATION NOT POSSIBLE [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] Is the vehicle repaired? No Go to MGSS STEERING SWITCH INSPECTION. Go to step 4. Go to MGSS MICROPHONE INSPECTION. Repair complete Check / Replace the CMU. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition No. 9 Cannot Make a Hands-Free Call Step 1 2 3 4 5 6 7 8 Inspection Result Action Yes Go to MGSS for DTC diagnosis Using M-MDS, are any infotainment system DTC's stored? No Go to step 2. Yes Go to step 3. Is Bluetooth enabled on the customers device? No Enable Bluetooth on the customers device. Yes Go to step 4. Is the customers device data service strength Move to a location where data service good? No strength is good and retest. Yes Go to step 5. Is the customers device paired to the vehicle? No Pair the customers device to the vehicle. Yes Go to step 6. Is the customers device selected in MAZDA Select the customers device from Bluetooth CONNECT settings? No settings. Delete the device from MAZDA CONNECT and Yes Normal Operation then re-pair it. No Go to step 7. Does Bluetooth work correctly? Go to http://infotainment.mazdahandsfree.com Yes Go to step 8. Web Site. No The customers device is not compatible. Is the customers device compatible? Does the same symptom occur on another Yes Go to step 9. Page 10 of 16 01/11/2022 02:42 PM cciz same model/year vehicle? 9 Reboot the customers device. Does Bluetooth work correctly? 10 Is the Bluetooth device in a place where radio waves may be blocked? (Behind or under a sheet, in a box, in a purse/bag, ext.) 11 Is the Bluetooth device contacting or blocked by metal objects? No Yes No Yes No Yes No Yes No 12 Is a Bluetooth device and a USB device connected at the same time? 13 Does the problem occur in a specific geological Yes location only? 14 15 Does the same symptom occur on another Bluetooth device? Does the voice recognition system operate using other functions such as Bluetooth Audio? No Yes No Yes No Go to step 10. Vehicle operation is normal. Go to step 10. Move the Bluetooth device away from hidden location. Go to step 11. Move the Bluetooth device away from metal objects. Go to step 12. Disconnect other USB device. Go to step 13. Move to a different location. This may be caused by electrical interference by radio stations, specific small power radio stations, or amateur radio stations for mobile identification used in industrial, scientific and medical devices. Go to step 14. Go to step 15 The customers device is not compatible. Check / Replace the CMU. • Document device model, software version and occurrence of the condition. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition Go to No. 8 Voice Recognition Does Not Work Page 11 of 16 01/11/2022 02:42 PM cciz No. 10 Cannot Play Bluetooth Audio Step 1 2 3 Inspection Result Yes Using M-MDS, are any infotainment system DTC's stored? No Yes Is Bluetooth enabled on the customers device? No Yes Is the customers device data service strength good? No Yes Action Go to MGSS for DTC diagnosis Go to step 2. Go to step 3. Enable Bluetooth on the customers device. Go to step 4. Move to a location where data service strength is good and retest. Go to step 5 Connect the customers device to a charger or recharge the device, then retest. Go to step 6. Pair the customers device to the vehicle. Go to step 7. Select the customers device from Bluetooth settings. Normal Operation No Go to step 8. Yes Go to step 9. No The customers device is not compatible. Yes 4 Is the customers device battery strength good? 5 Is the customers device paired to the vehicle? 6 Is the customers device selected in MAZDA CONNECT settings? 7 8 9 10 11 Delete the device from MAZDA CONNECT and then re-pair it. Does Bluetooth work correctly? Go to http://infotainment.mazdahandsfree.com Web Site. Is the customers device compatible? No Yes No Yes No Yes No Reboot the customers device. Does Bluetooth Yes work correctly? No Is the Bluetooth device in a place where radio Yes waves may be blocked? (Behind or under a sheet, in a box, in a No purse/bag, ext.) Does the same symptom occur on another same model/year vehicle? Yes 12 Is the Bluetooth device contacting or blocked by metal objects? No Yes 13 Is a Bluetooth device and a USB device connected at the same time? No Go to step 10. Go to step 11. Vehicle operation is normal. Go to step 11. Move the Bluetooth device away from hidden location. Go to step 12. Move the Bluetooth device away from metal objects. Go to MGSS NO Bluetooth® AUDIO AND INTERNET RADIO SOUND [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] Go to step 13 if not resolved. Disconnect other USB device. Check / Replace the CMU. • Document device model, software version and occurrence of the Page 12 of 16 01/11/2022 02:42 PM cciz condition. • Retrieve the data log if possible before replacing the CMU • Document date and time of the condition No. 11 Other symptoms Symptom Error Messages SiriusXM Bluetooth • Unable to Connect to SiriusXM Radio • Check SiriusXM Tuner Can SiriusXM be added if not equipped? iPhone incoming SMS Text Message is not displayed Wrong phone connected Hot temperature warning message Solution Update CMU software version to 74.00.230A or later. Go to MT-007/15 Go to MT-011/18 Go to SA-063/17 Go to MT-006/20 Go to MT-007/18 Go to 09-031/20 if applicable Touch screen operates by itself 2014-2016 Mazda3 (Japan and Mexico built) (ghost touch) Go to SSPB6 2014-2016 Mazda3 (Japan and Mexico built) Go to SSPB6 2016-017 CX-9 Center Go to SSPB9 Display 2017-2018 Mazda3 2018-2019 Mazda6 Screen cracking (spider cracking) 2016-2018 CX-5 Go to SA-008/18 2016-2017 CX-3 2017 MX-5 2016 MX-5 vehicles with VINs lower than JM1ND******119894 (produced before July 4, 2016) Go to 09-018/18 Clock Clock shows incorrect time Go to SA-041/20 How to update maps Go to Mazda Toolbox 1. Go to MT-001/18 Error message "Invalid SD Card" Navigation 2. Check VIN Lock 1. Go to MT-007/15 Navigation is inoperative 2. Go to MGSS MAP IS NOT DISPLAYED Rear view monitor is blurry Page 13 of 16 01/11/2022 02:42 PM cciz No Navigation voice guidance USB Aux Smart phone device will not charge Audio source improper operation when device connected to USB No USB audio sound No Aux audio sound [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] Go to MGSS NO NAVIGATION GUIDANCE VOICE OUTPUT [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] Go to MT-022/15 Go to MT-002/18 Go to MT-002/18 Go to MGSS NO USB AUDIO SOUND OUTPUT [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] Go to MGSS NO AUX AUDIO SOUND OUTPUT [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]] No. 12 How to update the Navigation SD Card Map Go to Mazdausa.com Select Owners → How to Use → Add vehicle year/model → VEHICLE RESOURCES → NAVIGATION SYSTEM → Map Update Guide NOTE: The customer will be instructed to download the Mazda Toolbox App. Page 14 of 16 01/11/2022 02:42 PM cciz License Error message in Mazda Toolbox Customer is locked out of map update on Mazda Toolbox due to unauthorized or counterfeit navigation SD card. How to unlock the customer account in Mazda Toolbox 1. Purchase a Genuine Mazda Navigation SD card. 2. Customer or dealer must contact NNG helpdesk by email at [email protected] and request customer account unlock. NOTE: NNG may require proof of purchase to unlock the customer account. Free map update period has expired Customer needs to go to "Buy content" to purchase map update. Page 15 of 16 01/11/2022 02:42 PM cciz No. 13 How to Check Navi SD Card VIN Lock Go to Mazda Toolbox (Version 4) Navi SD Card VIN Unlocked (Mazda Toolbox will not read card) Navi SD Card VIN Locked (VIN is displayed) Page 16 of 16 01/11/2022 02:42 PM cciz